3-axis accelerometers

... ADXL314 is a ±200 g range, 13-bit resolution, 3-axis digital accelerometer. The digital output data is formatted as 16-bit, twos complement data and is accessible through a serial peripheral ...

Frequency: 200 Hz - 3,200 Hz

The ADXL372 is an ultralow power, 3-axis, ±200 g MEMS accelerometer that consumes 22 μA at a 3200 Hz output data rate (ODR). The ADXL372 does not power cycle its front end to achieve ...

Acceleration range: 784, 98 m/s²
Frequency: 0.2 Hz - 14,000 Hz

... Please review the AM Series Accelerometers Datasheet for detailed specifications. Installed in 43217 (standard) or 37442 (high-temperature) housings to protect against adverse environmental conditions. Mounts the accelerometer ...

Acceleration range: 490, 735 m/s²
Frequency: 10 Hz - 15,000 Hz

Our 330400 and 330425 3-pin Accelerometers are appropriate for highly critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 meets ...

Acceleration range: 490 m/s²
Frequency: 0.2 Hz - 10,000 Hz

... environmental conditions. Mounts the accelerometer onto the surface of the monitored component for optimal frequency response. Three interconnect cables available with a threaded female connector at the accelerometer ...

Acceleration range: 2 m/s² - 40 m/s²
Frequency: 2.4 kHz - 5.5 kHz

... vibration and temperature) Product Description The AKF390 triaxial accelerometer is a voltage output type accelerometer independently developed and produced by RION Technology, which ...

Frequency: 2.4 kHz - 5.5 kHz

MEMS DIGITAL ACCELEROMETER Three-axis (X、Y、Z) Output: RS232 / RS485 / TTL Power voltage: 9~36V Anti-impact: 2000G Work temp：-40°C to +85°C Excellent deviation stability Excellent performance ...

Acceleration range: 2 m/s² - 40 m/s²
Frequency: 2.4 kHz - 5.5 kHz

... vibration and temperature) Product Description The AKF398 triaxial accelerometer is a voltage output type accelerometer independently developed and produced by RION Technology, which ...

Frequency: 0 Hz - 1,100 Hz

... in single, biaxial or triaxial configuration. MAIN FEATURES • Single, biaxial or triaxial accelerometer settings within the same case. • Different ...

Frequency: 0 Hz - 1,100 Hz

... in single, biaxial or triaxial configuration. MAIN FEATURES • Single, biaxial or triaxial accelerometer settings within the same case. • Different ...

Frequency: 0 Hz - 1,500 Hz

AMD MEMS strong motion seismic accelerometer suitable for any environmental condition and designed for vibration measurement of bridges and viaducts. Solgeo has developed this triaxial mems accelerometer ...

Accelerometer 4.0 for Vibration Protection and Industrial Monitoring' Step into the future of industry with CUBE, the revolutionary triaxial sensor that combines vibration protection, condition monitoring ...

AC-CAP-PRO by Texense is our new cost effective accelerometer. It's compact and industrial, capacitive type and available in 1,2 or 3 axes. - Range from +/- 2G to +/- 200G - Analog outputs 0,5V to 4,5V - ...

Combining our accelerometers into a new 3-axis inertial box, used by the worlds leading WRC, F1 and WEC teams. Possible configurations are as follows: - 3 x gas accelerometers. - ...

Acceleration range: -196 m/s² - 196 m/s²
Frequency: 100 Hz

Compact and lightweight class-leading 3 axis accelerometer. Temperature compensation to 80°C allows our customers an easy installation even in severe conditions. Our capacitive accelerometer ...

Acceleration range: 15 m/s²
Frequency: 100 Hz

MEMS accelerometer AS400 Product Introduction： AS400 is a high-sensitivity low-drift digital output tri-axis acceleration sensor developed by BEWIS Sensor. It is suitable for different ...

Acceleration range: 100 m/s²
Frequency: 100 Hz

AS100/AS200 Series Single axis Accelerometers Chips Product Introduction： AS100/AS200 MEMS Single axis Accelerometers Chips are developed and manufactured by BEWIS, ...

Acceleration range: 20 m/s² - 59 m/s²
Frequency: 0 Hz - 1,000 Hz

The RECOVIB® industrial mems accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial ...

Acceleration range: 245 m/s² - 4,903 m/s²
Frequency: 0 Hz - 10,000 Hz

The RECOVIB® industrial mems accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial ...

Acceleration range: 20 m/s² - 78 m/s²
Frequency: 0 Hz - 1,000 Hz

The RECOVIB® industrial mems accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial ...

3D ACCELEROMETER SENSOR FOR SEISMIC MONITORING 1 V/G Description 3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of ...

Frequency: 0.5 Hz - 7,000 Hz

• Acceleration range: ±100 g • M4.5, 4-pin connector • Selectable TEDS Template Accelerometer with a 100 g range, M4.5 connector, and selectable TEDS Template. Measuring ranges Maximum measuring range [g] 100 ...

Frequency: 0.5 Hz - 7,000 Hz

• Acceleration range: ±100 g • M4.5, 4-pin connector Accelerometer with a 100 g range and an M4.5 connector. Measuring ranges Maximum measuring range [g] 100 g Electrical properties Electrical isolation Case ...

Frequency: 0 Hz - 900 Hz

• Acceleration range: ±2 g • 9-pin connector, titanium housing Accelerometer with a 2 g range, 4 V full-scale output with temperature measurements, a titanium housing, and a 9-pin side connector. Threshold ...

Frequency: 30 Hz

... testing and stability control, rail car acceleration and deceleration control, tri-axis acceleration applications, vehicle roadway profiling and many others, including tri-axis acceleration applications ...

Frequency: 100, 200 Hz

... precision force-balanced accelerometers and is pleased to provide MEMS parts with the same attention to detail that our customers demand. The JMA-100/200/300 series is available in single (JMA-100), dual (JMA-200) and ...

Frequency: 400 Hz

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed ...

Acceleration range: 20 m/s² - 98 m/s²
Frequency: 0 Hz - 800 Hz

Available in four versions (measurement range: ±2g or ±10g, mounting process: screw or magnetic), the BeanDevice® 2.4GHz AX-3D XRange is a wireless vibration sensor with built-in data logger. Characterized by a waterproof ...

Acceleration range: 12 m/s²
Frequency: 10 Hz

... .4GHzAX-3D SR is a high-performance wireless vibration sensor with a scalable measuring range (±1.2G and ±2.4G with automatic range adjustment depending on the application). It offers a high level of precision (±0.7mg ...

Acceleration range: 20 m/s² - 99 m/s²
Frequency: 100 Hz

... WiLow® AX-3D is a ULP (Ultra-Low-Power) WIFI vibration sensor (acceleration and velocity) with a built-in data logger. Characterized by a waterproof (IP67/Nema 6) and a lightweight aluminum casing (65x59x35mm, 220g), ...

... the wireless triaxial sensor will allow you to make only one measurement for analyze the 3 axes of vibrations. This one aim to provide the data necessary for the software to analyze your rotating ...

An accelerometer measures the linear acceleration to the direction of one or more sensitive axes. TLP210 is the new family of tri-axial acceleration sensors, based on the MEMS technology, capable of ...

Type: -24 Vdc Sensitivity: 100 mV/g Frequency range:1,5 Hz … 15 kHz (± 3 dB) Min. Temp:-50°C Max. Temp:+125°C Hazardous area approval:yes Accessory/ connection cable type: AC-1112, AC-162, AC-163 Accessory/ mounting ...

Acceleration range: 5 m/s² - 39 m/s²
Frequency: 0 Hz - 200 Hz

The AC-73 sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum ...

Acceleration range: 20 m/s²
Frequency: 0.1 Hz - 100 Hz

The AC-23 package is a triaxial accelerometer sensor designed for Strong Motion and industrial applications where a high sensitivity is required. The AC-2x series are state-of-the-art servo-accelerometers ...

Frequency: 0 Hz - 10 Hz

... combined with the state of the art proprietary circuit design yields this cost effective and reliable accelerometer. MEMS cells include linear accelerometer sensing elements which measure ...

Acceleration range: 20 m/s² - 78 m/s²
Frequency: 100 Hz

High performance MEMS accelerometer (vibration sensor) Micro-Processor mounted for stable sensing and data processing Extended Kalman Filter, noise filtering and temperature compensation Customized spécifications for ...

Acceleration range: 20 m/s² - 200 m/s²
Frequency: 700, 250, 1,500, 1,000 Hz

• Accurate DC measurement • High frequency response • High shock protection • Low noise – high resolution • Differential output signal • Gas damping • Low cost sensors • Structural monitoring and testing • Aerospace vibration testing • ...

Acceleration range: 20 m/s² - 5,000 m/s²
Frequency: 0 Hz - 3,000 Hz

Accurate DC Measurement High shock protection Low noise – high resolution Differential-ended output signal Gas damping Low cost sensors

Acceleration range: 20 m/s² - 5,000 m/s²
Frequency: 1,500 Hz

Accurate DC Measurement High shock protection Low noise – high resolution Single-ended output signal Gas damping Low cost sensors

Acceleration range: 3 m/s² - 177 m/s²
Frequency: 0 Hz - 1,000 Hz

The QG series is designed for the measurement of acceleration in 1, 2 or 3 axes. The acceleration sensor is constructed based on MEMS technology, which utilizes a micro-mechanical chip. ...

Acceleration range: 78 m/s²
Frequency: 1,600 Hz

Sensor type: Acceleration sensor SIL CL 2 (acc. to IEC 62061) PLd (acc. to EN ISO 13849) Number of axis: 3 axis horizontal/vertical mounting (RMS or Signed Peak value) Measuring ...

Triaxial Piezoelectric Charge Accelerometer designed for general purpose vibration measurements on larger structures. Type 4321 is a triaxial, piezoelectric, DeltaShear®, Unigain‚ accelerometer ...

Acceleration range: 9,810 m/s²
Frequency: 6,000 Hz

... isolated, 3-screw mount, 3 connectors, 41 grams Key features • Triaxial • Light weight (41 gm) • Ground isolated • 12 pC/g • General purpose and package-testing The Endevco® ...

Acceleration range: 1,961 m/s²
Frequency: 10 kHz

The G-Link2™ -LXRS® Wireless Accelerometer Node features on-board triaxial or external single axis ±1 g to ±200 g MEMS accelerometers in a small, IP67 rated enclosure. ...

Acceleration range: 17 m/s² - 686 m/s²
Frequency: 10 Hz - 1,000 Hz

Accelerometer — SQ-XLD, the acceleration sensor module, uses a digital serial output to perform a calibrated acceleration measurement. SignalView, a PC data acquisition interface software, is written ...

Triaxial Measurement Range: ± 2 – 400 g Sensitivity: 10 – 2000 mV/g Spectal Noise: 7 – 400 μg/√Hz ASC’s OS-215LN-PG biaxial and OS-315LN-PG triaxial ...

Frequency: 0.8 Hz - 16,000 Hz

Sensors available in our range are of the accelerometer type. This means that the measured signal is proportional to the acceleration. Thus, it can be converted into a speed or position signal using an electronic component ...