|
|
MTM Power GmbH, the specialist for high quality smpss, offers in its program the 19" Euro Card with up to six different, galvanically isolated outputs with 6 or 8 TE. With the MTM Power Card of the series MPK1, an unexpected variety of possibilities can be created for 19" applications. Approx. 1.000 different power supply variations as
19" plug-in can be realised. As in a construction kit, the 19" power supplies can be individually assembled with the three basic components front plate, PCB and manufacturer of connector as well as the vacuum encapsulated modules of the series PMA, PMAS, PMN, PMG and PML. The MPK1 offers 2 mounting positions for PCB modules with an output power of 5 to 48 W, either with single, dual or triple outputs. The MPK2 has one mounting position for modules with an output power of 50 to 100 W and up to three outputs. With the MTM Power Card, power supply variations can be realised in seconds. If requested, a separate LED for each output can be included on the front plate. All modules with the same input voltage can be combined with each other. As customised power supplies have the same dimensions and pinning, even these can be combined with standard modules. |
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC PROFESSIONAL UPS units. |
|
Absopulse Electronics designs and manufactures an extensive range of rugged, high-performance AC-DC industrial power supplies, rectifiers and battery chargers. They are suitable for operation in industrial, mining, military, marine, railway and utility environments.
We provide cost-effective solutions for almost any input/output and mechanical configuration requirement, with output power ranging from a few watts to well over 5000W.
Our rugged, field proven AC-DC designs offer:
- AC-inputs: 85Vac to 264Vac universal, 115/230Vac or custom
- Outputs: 12Vdc, 24Vdc, 48Vdc, 125Vdc, 250Vdc or custom
- High input and/or output voltages available
- EMI filtering to meet any standards
- Immunity to shock, vibration, humidity, moisture, dust and insects on conformal coated and potted/encapsulated versions
- Operating temperatures of -40°C to +85°C available
- Power factor corrected inputs (PFC) available
- Single or three-phase designs available
- Full electronic protection
- Unit/module fail alarms (form C contacts) optional |
|
| Psus in modular 2- or 4-modules DIN boxes, 15, 30, 60 or 60W power, stabilized 5, 12, 15 or 24Vdc output; high efficiency, 50°C operating temperature without any performance reduction. |
|
| Universal 115/230VAC input and 3.75kV isolation safety transformer are standard features of all Convel 32000 Series Open Frame Linear Power supplies suppliers. Extensive output voltage and current combinations are provided in single, dual and triple output versions. |
|
| The MTM Power series PMA19 35 has been designed for the use in 19" racks. Due to the very slim case with only 4 TE, the PMA19 35 require very little space within the complete system. The devices have been designed as universal compact industrial power supplies with input voltage ranges of 85...264 VAC and 80...375 VDC for worldwide application. The switching frequency is 80 kHz and they are equipped an internal industrial fuse at the input. The nominal outputs of 5 V, 12 V, 24 V and 48 V are adjustable. Despite the compact design, the devices fulfill all common safety and EMI standards, are prepared for Class I and have a high efficiency. They are continuous short circuit and overload protected and optionally available with a power fail signal. |
|
AC/DC power-supply units
The wide range of AC/DC power-supply systems supplied by
Zentro-Elektrik includes devices with one or several output voltages, switched mode or series-regulated devices, modular power-supply systems, including units with hot-swap features and a large selection of power-supply systems in general.
They can be used in various applications as individual devices or redundant system solution or even as battery chargers and DC PROFESSIONAL UPS units. |
|
Customer specific power supplies suppliers and power conversion systems
Our professional development engineers solve even the most difficult problems in accordance with your specifications.
Based on our thorough experience and development process, we have become experts for our customers when it comes to professional packaging power supply solutions. In this way we can relieve our customers of development and application expenses and provide the necessary environment for trouble-free operation of their devices by using our highly reliable power supply units.
Our vast experience provides a great professional platform for us to deliver industry specific power supply solutions.
Whether it involves meeting the demands of the professional rail industry, or under-standing the issues faced by communications engineers, Zentro-Elektrik has the expertise to provide application know how, working with customers from conception through to manufacture of a professional safe and reliable power supply solution. |
|
DC – PROFESSIONAL UPS Systems for Safety Relevant Installations
With their modular construction, the latest DC – UPS systems in the GTLB/GTPB series from Zentro Elektrik expand the existing comprehensive range of DC – UPS systems for supplying power to safety relevant installations.
The AC/DC systems in standby parallel mode are designed for outputs
from 250 Watt up to 600 Watt and fitted with professional batteries at the customer’s request. Additional DC/DC converters can be added to the system if more output voltages are required.
A battery control and monitoring module allows to control the charging current and temperature control of the charge closing voltage.
Over and above this, numerous monitoring and control signals are provided via relays, LED’s or potentiometric. A signal relay, for example,
if the charging voltage fails, to switch off the battery on it reaching the closing discharge voltage, to give advance warning of reaching closing discharge voltage with an additional adjustable threshold or individual limitation of the battery charging current to prolong battery life, and
many more. Led displays and adjustable potentiometers provide for comprehensive signalling and the ability to adjust the maximum charging voltage or the defined point of battery switch-off. |
|
The models 1790 is a cost effective, high power, regulated Industrial dc power supply with 640 Watt output (0 to 32V, 0 to 20A). It is a linear high current DC manufacturer of power supply suitable for bench operation or standard 19" rack operation. This linear power supply is a high power workhorse that will easily deliver clean power to your high current circuits.
Constant Voltage/Constant Current Operation
Remote Programming Facility
Facility for Presetting the Output Voltage and Max.
Load Current Limits
Separate DC Output ON/OFF Switch
Remote Sensing Facility
High Stability and Close Regulation ±0.01%
Meet CE Specifications
|
|
# Models 1785B, 1786B, 1787B & 1788 are Programmable Suppliers of dc power supplies that offer new levels of "ease of use" and programmable functionality. Direct key in entry makes voltage and current selection fast, accurate and easy. In case calibration allows for simple, cost savings, uninterrupted operation. Sixteen user programmable preset outputs
# Controllable Output On/Off Switch
# 10mV/10mA setability resolution
# Closed case calibration
# Low ripple and noise
# Excellent temperature stability
# Serial interface cable and software included |
|
The model 9124 is a laboratory grade, 0-72V/0-1.2A programmable Dc switched mode power supply providing great performance and features not found in other supplies in this price category. The power supply was designed to meet the needs of today’s applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution/accuracy and fast transient response time.
* Excellent display resolution
* Fast transient response time (<20ms)
* SCPI compatible
* RS232 interface (standard), USB optional
* Closed case calibration
* Compact size for bench use or rack mountable (2U x 1/2U size)
* DVM and Miliohm meter
* Discrete Fault Indicator/Remote Inhibit (DFI/RI). Useful for turning multiple psus On/Off simultaneously
* Application Professional software for front panel emulation and simple test sequence generation included |
|
The DC energy systems from FAC P series of SALICRU are rectifiers specially designed to supply direct current to the most varied equipment
of medium and high power. Manufactured in power rates of 1000, 2000, 2700 and 5000 W, allow being connected in parallel and built in
19” professional cabinets, where each cabinet can also include a monitoring and management unit (MS-102), professional batteries and DC outgoing distribution,
as well as load priority systems. Besides, each rectifier module can be hot swapped for its connection and removing, with all the advantages
that it means in the system operating.
On the other hand, thanks to the high quantity of rectifier modules that can be connected to one system only, allow having power rates
higher than 170 kW.
The monitoring and management unit (MS-102) controls the complete system, also it stores and manages the input, output and battery
data; and allows setting all the parameters on it. The rectifier modules communicates with it through the RS-485 port, and permanently it
is controlling the output voltage, current sharing among the modules, battery charging current, critical and non-critical load contactors,
the end of autonomies, etc. The external communication can be done in local or remote modes (GSM / TCP-IP). |
|
| MPD offers a full range of compact modular, enclosed, U-channel, open frame and Din track mount AC/DC manufacturer of power supplies; including our new low cost 3W to 20W encapsulated models, industry standard 25W to 320W enclosed models and our full line of high power density 1-U height models. If your equipment requires a small footprint, universal AC input, robust filtering, high efficiency or multiple outputs; we have a low cost power supply to fit your application. Check out our on-line data. From 3W to 960W, over 2,000 models are available. |
|
1U PSU
Model ORION-A1501
150W 1U ATX psu with active PFC
Model ORION-A4001
400W 1U ATX power supply with active PFC
2U PSU
Model ORION-B4001
400W 2U ATX power supply with active PFC
Model ORION-B3501P
300W 2U ATX power supply with active PFC
PS/2 PSU
Model ORION-D5601P
560W PS/2 ATX power supply with active PFC
Model ORION-D3501P
350W ATX power supply with active PFC |
|
| Unipower Telecom's Radian Series are hot-swappable, modular rectifiers which produce up to 1200 watts output. There are 18 different models with different output voltages and power levels. The modules are ultra-compact with power density up to 17 watts per cubic inch. |
|
FlatPAC-EN - AC-DC Power supply suppliers
Small, versatile and flexible, the FlatPAC-EN can be configured with all standard VI-200 / VI-J00 and Maxi, Mini and Micro DC-DC converters %u2013 full, half and quarter-brick sizes. These modules cover the entire range of outputs from 1 to 100 Vdc and 25 to 500 watts, as well as an array of non-standard voltages. |
|
| In addition to the enclosure, the power supply plays a major role when it comes to the reliability and performance of an industrial computer. Take a look at the various power supplies manufacturers for different applications, each with different capabilities and substantial safety features. |
|
ULTRA-COMPACT 1U x 2U FRONT ENDS / RECTIFIERS
UP TO 650W OUTPUT WITH HOT-SWAP
FEATURES:
- Front End or Rectifier Versions
- 5V, 100mA Standby Output
- Hot-Swap or Chassis Mount
- Dual A/B AC Inputs
- Dual A/B DC Outputs
- 12, 24 or 48 VDC Outputs
- Class B Conducted EMI
- DC Good LED
- I²C Serial Data Bus Option
- Up to 9.5 Watts/Cubic Inch
- 1U x 2U Profile: 1.6 x 3.3 Inches
- Staged Pin Engagement
- ORing Diode on Output
- 19" Rack/Shelf Holds 4 Units
- Active Current Sharing
- Universal 85 to 264VAC Input
- SEMI F47 Compliant at Hi-Line |
|
High Voltage Power supplies manufacturer - rugged, compact, reliable instruments for just about any high voltage application.
With up to 20 kV output capability, a GPIB computer interface, and 0.001 % voltage regulation, these high voltage power supplies have become the industry standard.
There are several models to choose from, with outputs ranging from 1.25 kV to 20 kV. |
|
FlatPAC - 50-600 Watt Power System
The FlatPAC family of user-definable off-line professional power supplies combines high frequency DC-DC converters and front end subassemblies in a set of modular, low-profile, chassis-mount enclosures. The result is a flexible, economical power solution for systems requiring from 50 to 600 Watts of total output power. |
|
Our broad selection of both bench-friendly and system-ready instruments can meet your testing challenges - from basic to complex - with a wealth of available capabilities.
* Test confidently with clean, precise DC power that's fully specified and guaranteed
* Safeguard loads from potential harm with robust output protection and fault detection capabilities
* Enhance system flexibility with built-in, DMM-quality measurement functions
|
|
Model ORION-D4602P
460W+460W mini-redundant switching power supply specification with active PFC
Mini-redundant power supply suitable for 2U/4U and larger chassis
Active PFC, full-range input
Two independent AC inputs
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power interconnection for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-A4001
400W 1U ATX power supply with active PFC
Low profile power supply suitable for 1U and node chassis
Active PFC, full-range input
Support for dual Intel® Xeon™ processors
Total output of +5V and +3.3V is 50A
Max. +5V standby output is 2A
|
|
| REO build a range of variable output Dc power supply units that operate on the switch mode principle. The variable output is produced by high speed switching of the mains supply, after rectification, using IGBT's and controlling the mark space ratio. The DC level is reduced to the required output range by employing REO high-frequency industrial transformers. Smoothing components, also manufactured by REO, are used to give a steady, ripple free DC supply. |
|
Features:
- UL-recognition (in preparation) marking for worldwide
applications.
- Designed for power ratings from 120 to 960 W. |
|
1U High, Up to 450 Watts with PFC and Hot-Swap Provision
FEATURES
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap Operation
- 12, 24 or 48VDC Outputs
- I2C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 5.6 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Manufacturers of connector
- Staged Pin Engagement
- ORing Professional diodes on Output
- 1U, 19" Racks Hold 2 or 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Professional filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- Front-End Switcher - PCG & TPCG
- SEMI F47 Compliant at Hi-Line |
|
the EFS 8172 power supply manufacturers is a sinusoidal current source, isolated from the line at 2500 VA.
The output frequency may be set from 50 to 60 Hz and adjustable from 0 to 250A in 5 ranges. The accurate valuesof output current and voltage are available on front panel large numeric professional displays. |
|
350~500 Watt
Compact PCI Power dispensing
High Density 6U High Compact PCI Power Supply ideally suited for ruggedized Computer Applications. The series feature Universal AC, 24 VDC and 48VDC Inputs in the PICMG Compliant Package.
200~300 Watt
Compact PCI Power Supply
High Density 3U High Compact PCI Power Supply ideally suited for ruggedized Computer Applications. The series feature Universal AC, 24 VDC and 48VDC Inputs in the PICMG Compliant Package.
|
|
Radius Power specializes in custom and semi-custom power supply units with ratings up to 500VA. Below is a sampling of the types of custom power supplies we have developed.
|
|
|
