Housings

22 companies | 66 products
Housings
  • Type
    Submit
  • Application
    Submit
  • Material
    Submit
  • Other characteristics
    Submit
surveillance camera protection housing / dome - SNCA-HRX550-PRE

Sony's SNCA-HRX550-PRE Outdoor Camera Dome Housing is capable of integrating with various camera models. These include...

surveillance camera protection housing / dome - SNCA-HRZ50/EXT/W

The SNCA-HRZ50/EXT/W has applicable camera models, SNC-RZ30P and SNC-RZ50P, respectively each with IP66 rating. The operating...

surveillance camera protection housing / dome - SNCA-ICPTZ/T

The SNCA-ICPTZ/Tis a dyed low-profile indoor ceiling housing specifically built...

surveillance camera protection housing / dome - UNI-ORBC6

The UNI-ORBC6 is manufactured by Sony and is an enclosure that measures 20 mm L x...

{{productDetail[14618]}}
surveillance camera protection housing / dome - UNI-ORBC6

These Stainless steel thermistor housings produced by Temperature Technology...

{{productDetail[115163]}}
surveillance camera protection housing / stainless steel - IP 68 | CH-SW260

IP68 stainless steel camera housing
(2 bar dynamic compression strength)
Powder coated RAL 9016 (traffic-white)
Stainless...

surveillance camera protection housing / aluminum - IP 67 | CH-RT220

IP68 Aluminium housing
Powder coated RAL 9002 (light grey)
Aluminium...

surveillance camera protection housing / explosion-proof - -30 ... 55 °C | CH-EX260

IP68 stainless steel (SUS316Ti)
camera housing
Powder coated RAL 9016
(traffic-white)
Marine design for roughest
environmental conditions
Automatic...

surveillance camera protection housing / explosion-proof - -20 ... 50 °C | MC300A-EX

Camera Housing MC300A-EX
IP69K Aluminium anodized
Marine design for roughest environmental conditions
Automatic heating...

surveillance camera protection housing / aluminum - IP 68, - 35 ... 60 °C | MC5100

CRANE, OUTDOOR
Camera Housing MC5100

IP68 Anodized Aluminium Housing
Stainless Steel Mounting...

{{productDetail[14556]}}
surveillance camera protection housing / explosion-proof - IP66, AISI Mg | EXHD

EXHD
Explosion-proof housing with the same specifications as the EXHC series but fitted
with a patented device for the protection of the glass which gives clear vision...

surveillance camera protection housing / explosion-proof - IP66, AISi Mg | EXHC

The EXH housings are made with strong Anticorodal aluminium die-cast alloy of
AISi Mg EN AB– 42000 group. Depending on...

surveillance camera protection housing / stainless steel - AISI 316 | NXM

The NXM housing, entirely constructed from AISI 316 electropolished stainless
steel, is designed to operate in special environments such as marine, industrial,
chemical and where the external conditions are highly corrosive.
The NXM housing consists of...

surveillance camera protection housing / stainless steel - IP66/67, AISI 316 | NXL

The stainless steel special housings and P&T's have been designed to protect the cameras from particulary...

surveillance camera protection housing / stainless steel - IP66/IP67, AISI 316 | NXW

The solid construction of this housing makes it suitable for heavy duty applications,
such as the surveillance of ovens, foundries and other high temperature
environments.
The N XW housing is entirely constructed from electropolished stainless steel and
consists...

{{productDetail[38386]}}
surveillance camera protection housing - HHC12 series

The new HHC12 Series line of environmental housings are stylish and functional camera enclosures, with a design focus of...

{{productDetail[15565]}}
surveillance camera protection housing / aluminum - 90 x 84 x 300 mm | SSG-401/2

Dust proof housing without sun-shield or safety
thermostat for 230 VAC cameras and for low voltage
powered cameras in combination with additional
inbuild mains unit, aluminium case, cable access
via 3 x PG-9...

surveillance camera protection housing - 90 x 84 x 300 mm | WSG-401/3

Weather-proof housing with sun-shield, self- regulating heater, integrated power connection board and additional safety thermostat suitable for 230...

transmission housing for CCTV cameras / weather-resistant - 90 x 84 x 300 mm | WSG-421/3

Weather-proof housing with integrated wall-mount bracket, concealed cable access, sun-shield, self-regulating heater, integrated power connection board and additional safety thermostat suitable for 230 VAC cameras or for low voltage...

surveillance camera protection housing / aluminum - 105 x 86 x 350 mm | WSG-501/3

Weather-proof housing with sun-shield, self- regulating heater and safety thermostat suitable for 230 VAC cameras or for low voltage powered cameras in combination with the optional mains unit NT/DC-1500, aluminium case, cable access...

transmission housing for CCTV cameras / weather-resistant - 80 x 80 x 289 mm | WPH-602/ST

Weather-proof housing with sun-shield and wall bracket made out of stainless steel AISI316L for use under aggressive environmental conditions,...

{{productDetail[28815]}}
photo multiplier tube housing - ± 15 VDC

Room Temperature PMT Housing
ISS photomultiplier tubes housings are compact units designed for both photon counting and frequency-domain data acquisition; they are coupled to the ISS spectrofluorometers through a M28x1 threaded flange. An adapter for coupling the PMT housing to a 10 mm fiber bundle is available.

The...

photo multiplier tube housing - ± 15 VDC

Cooled PMT Housing
Cooling the photomultiplier tube, reduces the dark current and increases the dynamic range....

photo multiplier tube housing - 500 MHz

Microchannel Plate Detector
For the detection of light modulated above 500 MHz, a Microchannel Plate Detector (MCP) photomultiplier tube is required. The...

{{productDetail[35117]}}
photo multiplier tube housing - 500 MHz

At room temperature, the contribution from thermally generated electrons from...

{{productDetail[36267]}}
air-cooled housing / photo multiplier tube - 654

Photomultiplier Tubes (PMTs) are widely known for their extremely sensitive photon detection capabilities. They have applications in a wide range of spectroscopy applications. They possess large photosensitive areas, secondary emission multiplication, low dark noise and fast time response . Different...

air-cooled housing / photo multiplier tube - max. ø 52 mm | 650, 658

McPherson has developed photomultiplier tube (PMT) housing assembly which accepts end on PMTs up to 52mm diameter.It works from <30 to>900nm and fits McPherson slits and NW40 flanges very efficiently.Features...

{{productDetail[68114]}}
surveillance camera protection housing / aluminum - IP 68

Shutter automatically protects camera when not in use
18 IR LEDs for...

{{productDetail[14021]}}
surveillance camera protection housing / aluminum - IP 68

VIDEO CAMERA BOXES
475 and 735 mm video camera boxes IIC
- Grey painted aluminium alloy box
- Pyrex glass window
- Threaded...

{{productDetail[25422]}}
surveillance camera protection housing - EN 60529, 1P40

The 285/286 ceiling housings are all steel vandal resistant enclosures, with rear hinge and front key lock. The camera and lens can be adjusted in all three axes.

A tile option mounting...

transmission housing for CCTV cameras / weather-resistant - IP 65 | 504

The 504 camera housing is manufactured to...

surveillance camera protection housing - EN 60529, IP65

The 506 housing is specifically designed to accommodate CCD cameras including our Ice Range. The enclosure incorporates a removable top cover for camera access, similar to our type 515 housing. Units...

surveillance camera protection housing / explosion-proof - EN 60529, 1P40

The 508 housing is a stylish, weatherproof, fixed attitude, vandal resistant enclosure, designed to accommodate a wide range of C.C.D. cameras.

The housing...

surveillance camera protection housing - 12 V - 230 V | EN 60529, IP65

The 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera / lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

Insulated...

{{productDetail[27118]}}
surveillance camera protection housing / aluminum - SHB-4200 series

• For fixed lens application
• Rugged...

surveillance camera protection housing - SHB-4300 series

SHB-4300H : Indoor/Outdoor Housing
• For fixed camera application
• Aluminum diecasting construction
• Fully cable managed bracket
• De-mister heater, fan
• Support...

{{productDetail[22698]}}
surveillance camera protection housing / explosion-proof - BCV - 113

The range BCV and AD432 has been specially developed for installations of video...

{{productDetail[20906]}}
surveillance camera protection housing / explosion-proof - BCV - 113

- Camera enclosures protect the camera and lens from dust, water, high...

{{productDetail[85487]}}
surveillance camera protection housing - ECO

BassCam™ ECO Outdoor Camera Enclosures, shown with MECO universal wall/pedestal mount, provide economical...

{{productDetail[120181]}}
transmission enclosure for CCTV cameras / explosion-proof - 8214

The Stahl 8214 series are cameras that feature explosion proof and empty enclosure design. They have environmental operating temperature range of -30°C up to +40°C. They have been designed to be...

{{productDetail[9224]}}
housing - AMK04

This self assembled plastic housing unit from DECA is the base carrier. It measures 83 x 28.4...

{{productDetail[68205]}}
{{productDetail[11806]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation