I/O modules

The DAXIO3410E contains a versatile set of I/O channels and a Ethernet interface with different communcation stacks: 32 bit controller 4 digital in/out channels 16 digital input channels (6 digital inputs optionally used as code ...

The DIO021E is a remote I/O with 8 digital inputs, 2 digital outputs and 4 analog inputs, that is controlled via an Ethernet interface. All digital inputs can be used as PWM or event counter. The two digital outputs are isolated and allow ...

The DXIO0808C is a remote I/O with 8 digital inputs and 8 combined input/outputs that is controlled via a CAN interface. The combined inputs and outputs are software configured and may be used as I/O read-back. All I/O channels can be ...

INGESYS™ IC2 has a modular and expandable design that permits to achieve an optimal hardware solution for each application. Two control topologies are available: - Centralized topology In this topology the Controller is integrated ...

The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ...

Features ● TPM EtherCAT® add-on module ● Local bus support with CAN ● Pluggable terminal block with spring plug connectors ● DIN rail mounting (L-97 x W-100 x H-12 mm) EtherCAT® Serial interfaceFast Ethernet, Full-Duplex Distributed ...

106-D2xx Series is a 32-Channel Digital I/O Motionnet® slave module. With CAT5 cable, 106-D2xx Series can be connected serially. It also equipped with RJ45 phone jack for easy installation and LED for effortless diagnosis. Features ● ...

X-Series, XL-Series ready (CsCAN version) Capable of handling Digital/Analogue/Mixed/RTD & Thermocouple signals DIN rail mountable Easy to expand Powered by 24V DC Completely configurable from Cscape SmartRail ...

TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general remote Ethernet IO monitoring and ...

TCW122B-CM is a remote IO module with SNMP v1 support. It is dedicated to remote environmental monitoring and control. TCW122B-CM is a remote IO module for environmental monitoring and control, designed to work in Ethernet networks. ...

TCW181B-CM is an Ethernet digital IO module for monitoring of one and control up to eight devices per unit. TCW181B-CM is 8-channel Ethernet digital IO module. The device is manageable by WEB interface, SNMP programs or user application ...

The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc

EtherCAT ® Digital I/O Modules Powerful Digital and Analog I/O Modules for EtherCAT® Network Up to 32 Inputs and 32 Outputs Compact and cost effective Easy to use The IOMPS is a line of EtherCAT® digital and analog ...

Modular, Built-in, Local & Remote I/Os NEW! Ethernet-based Remote I/O Two Ethernet ports Slim modules – 12mm only Operating temperature range: -40°C to 70°C Supporting analog modules with 16bit resolution

Keysight’s U2600A Series isolated digital IO DAQs are high-performance modules with up to eight channels of 64-bit high density, opto isolated digital input and digital output. With an output voltage range of 5 to 35 V, you are able to ...

Our Bulletin 1715 Redundant I/O modules provide true redundant I/O support for critical process applications in standard and extreme operating environments. With exceptional ease-of-use, premier diagnostics, and flexible configuration, ...

SENSOR/ACTUATOR BOXES Sensor/actuator boxes, which are installed directly on machines or systems, are passive distribution systems for signal transmission that is rapid, cost-effective and, above all, cabinet-free. Thanks to the fully ...

Mount, connect and you're ready to go. This is the new dimension for remote I/O mounted directly on the machine. Its credit card size design allows for mounting in the smallest areas. No space whatsoever is required in the control cabinet. ...

Input Module IO 113 designed to interface with pump sensors. One without communication as standard variant and one with communication for interface to Sensor Module SM 113

6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, ...

• Built-in isolator • Supports auto-addressing • Zone line input for conventional detectors • Monitored general input • Isolated Optocoupler input • Two programmable relay outputs • Approved according to EN54-17 and EN54-18 • VdS ...

Hitachi´s newest Remote I/O series provides the best support on future oriented and enhanced application.The strength of this series is the flexibility by gathering machine information within decentralized applications with the combination ...

This product is a remote I/O model CPU unit that has RS-232C *1 and LAN interfaces in addition to four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this product ...

The module offers 32 channels. Of these, 17 are configured as digital outputs by default. Up to 3 option cards with 5 channels each can be used to add digital inputs and outputs. The digital input signals can be further processed in the ...

Ethernet Networked, single channel, late binding I/O solution for System 800xA Select I/O is a Ethernet based single channel I/O solution for ABB Ability™ System 800xA that offers full redundancy down to the Signal Conditioning Module. ...

Monitoring of the connected sensor system Fast safety response due to integrated fast shut-off function Diagnosis LEDs

Digital input/output mixed module 8 digital inputs, 8 digital outputs 24 VDC Sink/Source input option with 2 isolated groups, source outputs with 1 isolated group Built-in high-speed counters, 20Khz and 2 Khz Display ...

Our Bulletin 1753 GuardPLC Safety I/O modules are discontinued and no longer available for sale. Demanding market conditions pose significant challenges. Across the enterprise and throughout the lifecycle, you must continuously ...

Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...

For the connection of 1 circuit of potential-free, make-or-break contact for the indication of technical states (e.g. door or ventilation control) or for alarm actuation (e.g. sprinkler alarm). For the decentralized control of fire doors, ...

High-speed counting, along with position detection using an array of different displacement transducer technologies, both absolute and incremental, is an essential element of many automation applications. With the EtherCAT Box modules ...