
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Flow: 17 l/min - 47 l/min
The small drum pump JUNIORFLUX F 310 with fixed motor FEM 3070 and mechanical seal is especially suitable for pumping comparatively small quantities ...
FLUX-GERÄTE GMBH

The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can ...
FLUX-GERÄTE GMBH

Flow: 120 l/min
... amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump ...
FLUX-GERÄTE GMBH

Flow: 0 l/min - 200 l/min
Pressure: 0 bar
Head: 0 m - 22 m
... types of liquids- viscous or fluid, corrosive or neutral. They have a mechanical seal (MS) and immersible length of 1100mm. They have 3 diffusors and impellers in the multi-stage pump housing.

Flow: 56, 51 m³/h
Pressure: 0 bar
Head: 14, 15 m
... Polypropylene or stainless steel, it comes in four sizes in order to suit different pump capabilities. Integrated with a mechanical sealing system, this centrifugal pump possesses ...

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 20, 18, 25, 14 bar
Head: 17'00" ft - 450'00"
... Puma+ series is composed of centrifugal pumps that integrate three standard setup configurations, including a head fitting that obtains 7.8 bar pressure rate, and 135 cubic meter per hour flow ratio. The pumps ...

Flow: 2,000 l/min
Pressure: 10 bar
... attachment - Robust construction - Process flexibiltiy - Single mechanical seals standard. Optional double mechanical seals also available - Grease lubricated ...

The SPX® Aseptic Tank is a high-performance centrifugal pump with double-seal barrier fluid at all connections. This tank specifically features double mechanical shaft seals ...

Flow: 20 l/h - 17,000 l/h
Pressure: 15, 120 bar
... when exposed to atmosphere, WTTE also provides this range of pump equipped with a magnetic drive. The material is perfectly sealed in the pump. System pressures of an maximum of 700 bar can be accomplished ...

Pressure: 120 bar
The CHEM MINI is a gear pump that delivers precise metering tasks of low to medium viscosity media in chemical and pharmaceutical applications. This pump is suitable for classic transfer ...

Flow: 0 m³/h - 6,000 m³/h
Pressure: 63 bar
Head: 0 m - 190 m
Function Pump for safety-related and auxiliary systems. Design Horizontal annular casing pump with forged or cast pressure boundary and diffuser. Applications Core flooding, emergency cooling and residual ...
KSB

Flow: 0 m³/h - 6,000 m³/h
Pressure: 63 bar
Head: 0 m - 190 m
Function Pump for safety-related and auxiliary systems. Design Vertical annular casing pump with forged or cast pressure boundaryand diffuser. Applications Core flooding, emergency cooling and residual ...
KSB

Flow: 0 m³/h - 600 m³/h
Pressure: 10 bar
Head: 0 m - 52 m
Design Self-priming, horizontal, centrifugal pump. Opened or semi-opened impeller with plate adjustment. Sealed by mechanical seal. Design to ATEX. Applications Pumping clean, contaminated, ...
KSB

Flow: 1,200 m³/h
... armored chemical pumps especially for these applications. This specialized series includes pumps with single and double mechanical seal, as well as magnetic coupled ...

Flow: 0 m³/h - 12 m³/h
Head: 0 m - 27 m
Power: 0.25 kW - 2.2 kW
... Pump Series, the motor power is transmitted without slip directly to the pump impeller through a solid shaft. A mechanical seal prevents the leakage of the media to ...

Flow: 0 l/min - 500 l/min
Head: 0 m - 40 m
Power: 0.18 kW - 5.5 kW
... to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical ...

Flow: 0 l/min - 460 l/min
Head: 0 m - 39 m
Power: 0.18 kW - 5.5 kW
In the UP Pump Series, the motor power is transmitted without slip directly to the pump impeller with a rigid shaft (no magnetic coupling). A mechanical seal prevents ...

Flow: 650 m³/h
Pressure: 25 bar
Head: 150 m
... with a modular frame. The shaft sealing can be single or double acting mechanical seals, magnetic drives or canned motor designs. The speed of the standard chemical process pumps ...
Flowserve SIHI Pumps

Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m
Series CBT represents horizontal, single-stage volute casing pumps designed in compliance with ISO2858 / EN22858 pumps high temperature liquids(> 200 ºC) and offer special execution with center line feet ...
Flowserve SIHI Pumps

Flow: 1,200 m³/h
Pressure: 10 bar
Head: 100 m
... of horizontal, single-stage volute casing pumps are designed according to ISO2858 / EN22858 and enlarged sizes and feature full dismantling of the bearing unit towards the drive end without removing the pump ...
Flowserve SIHI Pumps

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

... interchangeability with mechanical seals and packed gland options. Features/Benefits Gentle pumping action minimises shear and crush damage to the pumped product Self priming pump that ...

Flow: 73 l/min - 2,216.6667 l/min
Pressure: 35 bar - 147 bar
Head: 12 m - 160 m
SACEMI HPP 80 Main applications The pump is designed for pumping clean and non-explosive liquids without abrasive and filamentous suspended parts and with a viscosity not exceeding 20mm2/s. The pump ...

Flow: 1 l/min - 12 l/min
Head: 10 m
Power: 0.16 kW - 0.3 kW
... primed before operation, and re-primed if the pump sucks in air due to a lack of liquid present in the system. To achieve its maximum working life, ensure that the pump does not run dry, as the mechanical ...

Power: 0.53 kW - 1.47 kW
... temperature of 90*C and maximum viscosity of 3* Engler (21 CST). The centrifugal transfer pump should not turn when dry since the mechanical seal is not self-lubricating. The pump ...

Flow: 25 m³/h
Head: 14 m
Power: 0.42 kW - 0.9 kW

Flow: 0 m³/h - 200 m³/h
Pressure: 0 bar - 80 bar
Suitable for clean products, high lubricity and medium to high viscosities The NETZSCH Three Screw Pumps have one drive screw intermeshing with two driven screws, transfering torque from one screw to the others. ...

Flow: 300 m³/h
Pressure: 16 bar
Head: 1 m - 110 m
High reliability through optimum design of the pump and mechanical seal RG4 for solids Standardization possible: mechanical seal of conventional manufacturer ...
Richter Chemie Technik

Flow: 6 m³/h
Pressure: 10 bar
Head: 1 m - 12 m
High reliability through optimum design of the pump and mechanical seal RG4 for solids Standardization possible: mechanical seal of conventional manufacturer ...
Richter Chemie Technik

Flow: 40 m³/h
Pressure: 16 bar
Head: 1 m - 60 m
Self-priming, without additional suction tank Pumps liquids with up to a 30% gas content Also works with back pressure Maximum reliability through plain bearings with SAFEGLIDE® PLUS dry running optimisation (option)
Richter Chemie Technik

Flow: 150 us gal/min - 400 us gal/min
Pressure: 40 psi - 250 psi
Single stage, end suction firefighting pumps. NFPA-20 design. UL Listed and FM Approved.
RUHRPUMPEN

Flow: 100 m³/h - 20,000 m³/h
Pressure: 100 bar
Head: 10 m - 1,200 m
... two stage, horizontal pump engineered to comply with the latest API 610 standard (BB1 type). It is a process and transfer pump design developed for the tough demands of pumping crude oil and other hydrocarbons. ...
RUHRPUMPEN

Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m
The transfer pump of the ZLM design was developed for stringent demands, being compatible with various applications in the industry. The main special pipeline pump is recommended for applications with ...
RUHRPUMPEN

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... the pump material, and the variable wall thickness design is used for the large size parts. It is the combination of mechanical seals and vice impeller for the shaft seal, ...

Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m
... reliable mechanical seals are applied for shaft seals, and there is no leak inside the pump. Applying solid-liquid two-phase theory to the pump impellers ...

Flow: 30 m³/h - 780 m³/h
Head: 20 m - 120 m
... property of alumina process to the YZS(D) pumps to get the best wear resistance performance in the field of alumina process. Applying the combination structure of “dynamic seals & mechanical ...

Flow: 0 l/min - 450 l/min
Head: 0 m - 38 m
Power: 1.1 kW - 3.8 kW
... Immersion Pumps series TGL/SGL equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high-speed grinding. The ...
Brinkmann Pumpen

Flow: 0 l/min - 160 l/min
Head: 0 m - 35 m
Power: 0.54 kW - 1.95 kW
... End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and ...
Brinkmann Pumpen

Flow: 0 l/min - 450 l/min
Head: 0 m - 30 m
Power: 0.92 kW - 2.55 kW
... End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and ...
Brinkmann Pumpen

Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
Features: 1. Close-coupled design, small size, space-saver,high efficiency, easy maintenance. 2. Adopt high quality Mechanical seal, to ensure no leakage and extend life time. 3. Semi-open ...

Flow: 1 m³/h - 960 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 80 m
Features: 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and keeps long life. 3. Compact & ...

Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
Features: 1. Close-coupled design, small size, space-saver,high efficiency, easy maintenance. 2. Adopt high quality Mechanical seal, to ensure no leakage and extend life time. 3. Semi-open ...

Flow: 0 m³/h - 150 m³/h
Head: 70 m
MIT hygienic centrifuge pumps are used in food, pharmaceutical and cosmetics industries. Clamp type connection is used. 316 L stainless steel is used for body material. Special design of its fan and cover it reduces ...

Flow: 0 l/min
Pressure: 0 bar
Head: 0.5 m - 10 m
Electromechanical assembly in AISI 304 chrome-nickel steel, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump with food-grade oil ...

Flow: 0 l/min
Pressure: 0 bar
Head: 1 m - 11.6 m
... for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump ...

Flow: 0 l/min
Pressure: 0 bar
Head: 1.5 m - 14 m
... for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump ...

Flow: 86.4 m³/h - 198 m³/h
Head: 9 m - 52 m
Power: 0 kW - 30 kW
Description: The HS type mining slurry process pump is the single stage, single suction, cantilevered,horizontal, heavy duty, centrifugal slurry pump. It is designed for the successive handling of ...

Flow: 100 m³/h
Pressure: 2 bar - 3 bar
Head: 24 m - 28 m
6x5x11 Model SM series mud centrifugal pumps SM series pump is single suction, single stage, horizontal, centrifugal pump. It is designed for handling abrasive mud for the drilling ...

Flow: max 200.0 us gal/min
Pressure: max 5.6 bar
Q-PUMPS offers a liquid-ring pump, with a turbine-type impeller made from 316L stainless steel, in compliance with 3A standards. Its single and double mechanical seal ...

Flow: 0 m³/h - 900 m³/h
Pressure: max 8.0 bar
Head: max 80.0 m
Submersible pumps made of vinyl ester thermosetting resins, Saturnsub have a high mechanical strength, dimensional stability and an excellent chemical resistance. The electric motor is completely made ...

Flow: 750, 700 m³/h
Pressure: max 8.0 bar
Head: 90, 130 m
... shaft and this latter fitted with sliding rings mechanical seal. Different types of mechanical seal are available so the pump performance is always ...

Flow: 0 m³/h - 900 m³/h
Pressure: max 8.0 bar
Head: max 80.0 m
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers ...

Flow: 5 m³/h - 3,500 m³/h
Pressure: 20 bar
Head: 5 m - 210 m
NME Series Heavy Duty Pumps Description : Single stage, end suction, volute casing ISO EN 2858 DIN 24256 standard pumps. Centerline mounted, single stage volute casing pumps with mechanical ...
MAS - DAF

Flow: 2 m³/h - 850 m³/h
Pressure: 10 bar
Head: 2 m - 100 m
INM/INL Series Inline Centrifugal Pumps Description : Single-stage inline type centrifugal pumps are produced with standart motors and mechanical seal. Pump ...
MAS - DAF

Flow: 30 m³/h - 4,000 m³/h
Pressure: 16 bar - 20 bar
Head: 10 m - 160 m
SPLT-V Split Case Double Suction Centrifugal Pumps Description : SPLT-V pumps are manufactured with mechanical seal. In SPLT-V pumps are placed on the ...
MAS - DAF


... via vortex action Sic Mechanical Seal with great wear resistance. Watertight cable entry system protects the motor from water and moisture in case of cable damaged and submerged. Built-in thermal protector ...
zhejiang fengyuan pump industry co.,LTD

The body of motor and pump is made of rigid cast iron for long-lasting durability. Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure. Semi-open ...
zhejiang fengyuan pump industry co.,LTD

Flow: 270 m³/h
Head: 120 m
Power: 22 kW - 75 kW
The body of motor and pump is made of rigid cast iron for long-lasting durability. Greatly increased maximum submersion depth due to double mechanical seal resistant to high pressure ...
zhejiang fengyuan pump industry co.,LTD