|
|
A new HAUG product development of an oilless piston compressor combined with a blower!
This new product combines the advantages of a blower (compactness and easy regulation) with the advantages of our piston compressors (high energy efficiency and higher discharge pressures). In combination of both, we are offering you virtual technical and economic benefits. This compressor is perfectly qualified for the oil-free compression of biogas.
|
|
HAUG piston compressors with magnetic coupling offers the best gas tightness for Bio-methane and biogas.
The gas tightness of a compressor is essentially determined by the gaskets and drive system used. HAUG piston compressors are equipped with a unique drive system with frictionless magnetic coupling. The compressor is hermetically and permanently gastight. All gas compressors with magnetic coupling drive are leak tested with helium at HAUG’s workshop prior to shipment. The detected leakage rates are very small, only a few grams per year! which is very important for Biogas treatment plants. Leakage rate < 1% offers a positive environmental balance, because methane has a damage potential which is 23 times higher than CO2.
Consequently, HAUG uses exclusively o-rings inside the compressor. Thereby the compressor is technically and permanently gastight – even after maintenance or service jobs.
|
|
- oil-free
- up to 150 bar
- absolutely gas-tight
- compressed air and gas
- ATEX-conformity
- air- or water-cooled
|
|
Perfect PAIRformance
This is exactly what you need: 100% pure compressed air up to 10 bar
A piston compressor?
Yes, indeed!!
But in an entirely new and compact design. Latest compressor rechnology for oil-free compression and minimal wear. No oil level checks any longer, no belt replacements any more. K-type models are designed for one-stage compression up to 10 bar. Favourable price and cost effective operation.
Innovative drive (push rod principle)
Precise cooling air guidance
Low inside hood temperature
Intense low temperature cooling
Modern machine control system
Completely ready to install
Switch to oil-free:
And save money!
During operation. Reduced downstream air treatment costs.
Condensate treatment eliminated.
Reduced service time costs.
Reduced service component costs.
Modular design means easy expansion.
K means reduced energy consumption.
Effective FAD:
244 - 648 l/min
9 - 23 cfm
Pressure range:
10 bar
150 psig
Rated power:
2,2 - 5,5 kW
3 - 7 HP
|
|
ENVIRONMENTALLY FRIENDLY COMPRESSION OF GASES – A HAUG SPECIALITY
HAUG gas-compressors run absolutely oil-less with dry lubrication. The oil-less compression avoids any contamination of the process gas and the process machinery.
To obtain an absolutely hermetically gas-tight unit, HAUG gas compressors are equipped with a magnetic coupling. For this construction the permanent total gas leakage is less than 0.001 mbar l/s during operation as well as at standstill. In the case of helium at 3 bar pressure the gas loss is merely 5 grams per year! Contamination of the ambient environment through gas leakage with these compressors is practically impossible.
|
|
|
Quality, reliability and cost effectiveness distinguish this series. These characteristics are proven daily by many customers world-wide under hardest conditions.
|
|
- Because of their basic design, limited number of working parts and straightforward working principle, piston compressors are the best solution when compressed air is needed in harsh conditions.
- Simple maintenance, thanks to easily accessible parts for servicing.
- No need for special treatment (oil separation) nor oil filtering as there is no direct contact with oil.
- High reliability and increased lifetime due to limited risk of condensation formation as a result of the piston compressor's low mass.
- Piston compressors can operate in a very wide range of working pressures. Maximum working pressure for the Atlas Copco L series is 30 bar.
|
|
Reliable, high quality performance
Atlas Copco’s L series air compressors stand for exceptional reliability and minimum maintenance. Incorporating state-of-the-art technology, the L series delivers the coolest operating temperatures in the industry while offering superb quality air.
Automotive design and high quality materials for unmatched performance and extra long life.
Exceptional reliability for heavy duty in industrial applications
|
|
Dry running WOB-L piston pump. Well suited for applications requiring high pressures.
Mainly used as a compressor.
Free flow: 187 l/min
Pressure: 10 bar max.
|
|
OIL-LESS AND DRY COMPRESSION –
A HAUG SPECIALITY
HAUG is the inventor of oil-less and dry-running piston compressors. For decades HAUG compressors have proved themselves in difficult operational conditions and climatic environments. HAUG dry-running compressors are ideal for continuous operations, intermittent operations, and emergency operations with practically no running in time.
|
|
JAB Kompressors are own developments with the knowledge we gained during the construction of our compressors with a performance up to 350 Bar.
The main characteristics of these machines are oil pressure lubrication, oil pressure control, oil pressure monitoring, shut down in case of lack of oil, oil and water separation with automatic discharge and condensate separation as well as very low noise emitting values.
|
|
Applications of natural gas compressors from HAUG:
- recovery of leakage gas from stuffing boxes or mechanical seals on big piston or turbo compressors
- boosting of natural gas for example on plasma spray coating processes
Advantages of oilless and gastight HAUG piston compressors:
- no oil contamination
- dry running
- gastight with magnetic coupling
- conform to ATEX norm
- no idle run operation
- high reliability
- compact design
- air- or water-cooled (for heat recovery)
|
|
Advantages of JAB Compressors For Gas Compression
Compressor 4 stages, air cooled
Compression proofed crankcase
Gas proofed shaft packings through axial face seals
Oil pressure lubrication for crank drive and piston of the 3rd and 4th stage
External lubricating oil filter
High efficient cooling system
Maintenance-free oil and water separator
Micro filter at the high pressure gas outlet
Efficient, economic, easy maintenance
|
|
QT/PLT-Xtreme 5-15 hp Two-Stage Compressor
Enclosed in a sound attenuating canopy for low noise operation, the Quincy Xtreme units include specific configurations of two-stage QT splash, or PLT pressure lubricated, tank mounted compressors. All Xtreme units feature Quincy cast-iron compressors designed for long life, and Quincy’s industry leading 5-Year True Blue Warranty as standard.
- 5-15 hp, 175 psig maximum
- 1 or 3 phase
- Sound level 65 db(A) or less
- 80 gallon horizontal tank
- Standard 5-year warranty- Sound attenuating canopy
- Air-cooled aftercooler
- Electric ODP motor
- Easy maintenance
- Reduced operating costs
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
|
|
|
|
Sauer Compressors UK offers 2-stage, 3-stage and 4-stage air cooled compressors covers from 40 bar up to 420 bar.
With the WP 4325 and WP 3215 compressor types, the existing Sauer line of air-cooled high-pressure compressors has been enlarged.
The Tornado series consists of the three-stage WP3215 and the four-stage WP 4325. Each of these is available in the "Basic-Version" - a compressor with motor and an optional separate control unit - and in the "Comsilent-Version" - a complete, ready-to-operate system with soundproof canopy.
The "Comsilent-Version" of a modern compressor station. Fully automatic electronic control, noise insulation down to 72dB (A) at a distance of has everything presently required 1m, integrated filter, demistor and condensate collector tank. The width of less than 800mm width allows it to be conveniently brought through any door, the maintenance points are easily accessible through a side maintenance hatch or a front side designed as a door.
Compressors of the Tornado series can naturally also be supplied fitted out for special applications, for example as a gas-tight version for compressing helium, or for use in explosion-protected zones in compliance with ATEX regulations.
|
|
Features
The above models are available with the following features:
* Air cooled
* Open
* Base mounted
* Tank Mounted
Specifications
Elgi Reciprocating air Compressors are designed for optimum efficiency with minimum maintenance to meet satisfactory requirements of compressed air. They are available in stationary/portable and electric/diesel powered models. Custom built models for specific applications are also available on request.
Higher free air delivery at lower pressure for your specific requirements can also be offered. For base mounted units, vertical air receivers up to 10,000 litres capacity and working pressure 1 kgf/cm2 can be supplied. Water cooled after-cooler, moisture separator and oil absorption filter can also be supplied for specific requirements.
Elgi also offers high pressure vertical air receivers up to 1000 Litres. Capacity and 65kgf/cm2 pressure.
|
|
|
|
|
|
PH and PHB piston compressors deliver compressed air at pressures ranging from 15 to 35 bar. The intake pressure for all PH models is atmospheric, while the PHB booster compressors process air with intake pressures ranging from 6 to 10 bar. Both Series share high-performance features and components to ensure maximum reliability.
PH series high-pressure reciprocating compressors, lubricated, air cooled, with measured capacity from 12 to 46 m3/h and delivery pressure from 15 to 35 bar, have been designed to guarantee high performance over time. Every PH model has a dual-stage piston air end, with special steel pipes for inter-cooling the compressed air and improving the overhaul compressor efficiency. PH compressors are equipped with condensate separator and electronic controlled drainer, non-return valve of Hoerbiger type, intake and outlet pressure gauge.
PHB series boosters are lubricated reciprocating compressors with measured capacity from 8 to 150 m3/h, intake air pressurized from 6 to 10 bar and final pressure at 20 or 35 bar. These compressors are compact and silent thanks to the vibration-proof rubber bushings supporting the booster frame, easy to install without foundations or soundproof cabin. Coupled with medium pressure compressors in a centralized installation or remotely connected to the pneumatic line, the boosters are a flexible and cost-effective solution for feeding high pressure air to manufacturing processes and tools.
|
|
To be able to meet customer's demands for particularly low-maintenance compressors, Sauer, in conjunction with well-known partners successfully developed a series of 3-stage air-cooled compressors at the beginning of the 1970s.
Through the division of compression into three stages, these designs demonstrate exceptional endurance even under very difficult operating conditions. We have delivered over 4,000 of these compressors to our customers all over the world for a wide range of applications - you too can benefit from our experience.
The performance of our machines 3-stage air-cooled compressors is matched only by our customer support: outstanding service you can rely upon at any time. Our business traditions are based on straight dealing, where honesty is always welcome and a handshake still counts.
Our full range stocks mean we can deliver spare parts required immediately - even for earliest generation compressor parts.
|
|
The compact, quiet 12 and 24V DC compressors are suitable for various applications, including advanced control equipment, military vehicles, trams, trains, emergency vehicles, and remote medical equipment.
|
|
The CompAir H series compressor range sets the standard for heavy duty high pressure compressors for these applications:
CNG vehicle refuelling solutions
Breathing Air
P.E.T. Bottle blowing and Oil-free
Industrial air and gas
Defence
Marine and Off-shore
All H series models are designed to meet all major survey and certification requirements worldwide and are manufactured at Reavell House in Ipswich, UK - the home of high pressure compressors.
|
|
When a reliable supply of quiet compressed air is required, JUN-AIR's oil-lubricated range of compressors is the perfect choice. The noise level is as low as 35 dB(A) - far below the level of normal conversation.
The quiet, vibration-free and reliable compressors have a compact design and are easily mounted at the place of use.
|
|
|
General's LT Series tank mounted, oil lubricated air compressors are integrally mounted on ASME air receivers to offer further ease of installation and versatility. Tank mounted units should always be used when an accelerator is required on the sprinkler system. Multiple dry valves may be supplied from a single tank mounted air compressor when using an AMD-1 UL / FM Approved air maintenance device on each individual system.
|
|
|
|
|
|
These days, many industries require oil-free compressed air in a durable, high quality package. Ingersoll-Rand meets these demands with a family of oilless reciprocating air compressors. And oilless means you won't find one drop of oil in the entire crankcase. Outstanding cooling and precision fit mean that our components provide trouble free performance in demanding conditions even when 24-hour continuous duty is required. Our proven service schedule, with periods of extended maintenance intervals, virtually eliminates downtime.
Features:
Stainless steel valves designed for long life and minimum maintenance.
Teflon rings and rider bands self-lubricating: no oil needed.
Precision-fit components accurately machined cylinders with coated bores and cast-iron frame offers proven reliability, durability and extended ring life and maintenance intervals.
Superior cooling systems unique cooling design dissipates heat, enabling 24-hour a day, 125 psig, continuous duty operation.
Thermal insulator prevents heat of compression from transmitting to piston pin bearings.
Balanced one-piece crankshaft reduces noise and vibration.
Single-piece connecting rod long lasting, no-maintenance design.
Ball and needle bearings grease-filled and sealed to maintain optimum system performance.
|
|
Sophisticated use of clean and dry compressed air in laboratories, within the dental and medical industry results in an increasing demand for higher quality oil-less air compressors.
The JUN-AIR models 1000 and 2000 are traditional piston compressors, providing reliable operation and long lifetime.
Additionally JUN-AIR has introduced the compact and robust OF300 series based on the latest technology in material and an innovative principle of compression with few moving parts.
|
|
QRDS 2-30 hp Single Stage Oil-less Compressors
Capable of virtually maintenance-free operation for up to three years (10,000 hours), hospitals, laboratories, dental offices, pharmaceutical and food processing companies all rely on the Quincy QRDS for clean, oil-less air. The QRDS runs slower and cooler than competing single-stage, oil-less compressors, which ensures efficient operation, lower maintenance costs and longer unit life.
QRDT 5-30 hp Two Stage Oil-less Compressors
Using two stages of compression, the Quincy QRDT™ can deliver up to 150 psig pressure with an air-cooled intercooler and aftercooler as standard equipment. The Quincy QRDT two-stage, oil-less reciprocating air compressor meets NFPA99 requirements for hospital and medical compressed air.
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
Champion Reciprocating Oil-Less Air Compressors
MTO-II - .75-5 hp
Single-Stage Compressors
Instant Information Center
Sales Brochure
Dimensional Drawings
Oil-less Is Better!
Whether it’s healthcare, instrumentation, or laboratory applications,
the need for pure, environmentally clean, compressed air is rapidly
expanding. Gardner Denver oil-less air compressors are ideal for
continuous or intermittent operations.
Features
* Meets NFPA99 requirements
* Corrosive resistant receiver
* Low noise levels
* 50-125# working pressure
* Inlet air filter silencers
* Pressure relief valves
* Structural steel frames
* Automatic start stop controls
* Duplex, Triplex, and Quad packages available
Maintenance
* No oil or fluids to change
* Little need for costly maintenance
Durability
* The highest reliability in the business
* 100% duty cycle
|
|
|
Ingersoll Rand became the world leader in compressed air technology not only by building more air compressors, but also by providing more problem-solving system solutions for its customers. No one offers more solutions than Ingersoll Rand: centrifugals, versatile controls, air system audits, turnkey installations, "air over the fence", financing, rentals and full service. Ingersoll Rand customers know that Ingersoll Rand is with them for the life of their compressed air installation.
|
|
JUN-AIR manufactures complete custom design solutions worldwide to suit a wide range of applications, whatever shape or size, it is designed for the individual customer.
More and more customers have individual requirements for their compressed air solutions, low noise and vibration levels are essential for a built-in compressor supplying air to the customers' equipment. JUN-AIR association with major customers in OEM projects lasts from the initial contact, to the design and final installation of the compressor solution.
|
|
|
Ingersoll Rand duplex compressors offer two individual compressor pumps and motors mounted on a single unit, providing 100% built-in backup or additional air power for those larger capacity jobs. The Duplex is ideal in applications where available power does not allow for a single larger compressor.
|
|
Industrial Duty Reciprocating Air Compressors
Quincy reciprocating compressors are specifically engineered to deliver the high pressure you need at an affordable price. Quincy reciprocating compressors produce up to 175 psig and are rated at a 100 percent duty cycle.
- Available with a gasoline engine, diesel engine or electric ODP single or
three-phase electric motor
- Motor overload protection standard on all electric models
- Low oil shutdown
- Air-cooled aftercooler
- Pneumatic tank drain
- Two-piece connecting rods
- Industrial class bearings
- Loadless auto stop/start
- Cast iron crankcase and cylinders
Visit www.quincycompressor.com/locator.html to find a local Quincy distributor
|
|
|
|
