DN: 20 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C
... Aseptic Sampling Valve is designed to be installed in tanks and reactors. It can also be used for food preparation and pharmaceutical operations. This device ensures absolute drainability without dead leg. The VA-VFA Aseptic sampling ...
AERRE INOX Srl
DN: 3.2 mm - 4.2 mm
Pressure: 100 bar - 400 bar
... Internal Tighteness : Mini 10-3 mbar.l/s en helium ( Valve / Seat) External Tighteness : Mini 10-4 mbar.l/s en helium KV value for a pressure drop / loss ΔP = 1 bar : - Internal diameter Ø 3,2 mm : KV = 0,23 - Internal ...
IMF
DN: 1.813 in - 7.063 in
Pressure: 15,000, 10,000 psi
... next project, Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed as a manual ...
CAMERON
DN: 0.5 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL
Rotex Automation Limited
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
SOMAS
DN: 50 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 150 °C
... the flushing chambers prevent any contact of the product with the environment. On the inside of the valve, the self-draining valve housing with single- seat, leakage chamber and balancer cleaning allow ...
DN: 0.25 in
Pressure: 27.6 bar
... globe valve is recommended for trim valve application in an automatic fire sprinkler system. It is typically used to attach a pressure gauge to the system. The resilient seat allows positive shutoff at ...
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
... Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and disk with triple ...
VAG-Group
DN: 15 mm - 400 mm
Pressure: 55 bar
Temperature: -196 °C - 450 °C
... free floating ( seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs There are two separate design types within the one piece Ultra-Seal range, ...
Pentair Valves & Controls
DN: 0.5 in - 2 in
Pressure: 25 bar
Temperature: -10 °C - 180 °C
... Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Body material: (CC491K EN 1982: 2000) Bonnet material: (CW617N EN 12165: 1999) Seal material: PTFE ...
M & M INTERNATIONAL
DN: 15 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C
... • Flow rate regulator valve. • 100% factory tested. • A cone closing system on top of an EPDM O-Ring. • Connections: 3 pieces union, solvent female, solvent male and male threaded. • Minimal pressure drop. • Easy disasembling. • ...
DN: 25 mm - 150 mm
Pressure: max 10.0 bar
... double seat valves were developed according to the EHEDG criteria and are among the most modern leakage-proof valves of our time. They are used for the mixture-safe separation of incompatible products ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar
... suit the process conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle transfer of the product - Metal stop for ...
Evoguard GmbH
DN: 0.5 mm - 8 mm
Temperature: -10 °C - 200 °C
... Pneumatic control valve VALVE STYLE Ball valve USAGE Low-pressure service Mixing or diverting service On/off service Mixing service VERSION ANSI SUPPLY Pneumatic VALVE ...
DN: 40 mm - 500 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 70 °C
... Sferaco’s Resilient-Wedge Gate Valve showcases a stainless steel non-rising stem, an EPDM or NBR-coated ductile iron wedge, an NBR-finished bonnet gasket, and a body painted wit RAL 5005 color (thickness rate of 250 pm). The valve ...
SFERACO
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 345 bar
Temperature: -54 °C - 232 °C
... /li>
Technical data
- Type: Needle valve
- Inlet pressure P1: max. 345 bar
- Material: see ordering info
- Body: see ordering info
- Seat: PCTFE
- Filter: 316
惠州骏邦科技有限公司
DN: 25 mm - 50 mm
Pressure: 16 bar
... Angle valve with threaded terminals for potable water or non-aggressive liquid systems. Flow regulation by rotation of the stem. Also available with counter-clockwise closing system. Vertical installation. - Materials: - Ductile cast ...
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -15 °C - 150 °C
... refrigeration Connection: External thread according to ISO 228/1 Leakage rate: EN 1349 – Seat leakage VI G 1 (tight seal) Body: Bronze Rg-5 CC499K Valve/shaft: Brass CW614N / CrMo steel 1.4122 Cable gland seal: ...
Regulation France
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...
Hawle
DN: 15 mm - 100 mm
Pressure: 0.4 bar - 28 bar
Temperature: 180, 250 °C
... Suitable for dead end conditions. Guided piston and valve stem. Hardened plug. OPTIONS: Soft sealing. Low pressure top. Dome-loading. Top cap. Bottom cover drain connection. Stellited plug and seat. Internal sensing ...
VALSTEAM ADCA Engineering S.A.
DN: 0.5 in - 10 in
Temperature: -29 °C - 120 °C
... variety of this series of ball valves manufactured to API, ASME, DIN And JIS standards. - Usually furnished with flanged end connection. - Due to the low-pressure ratings and small sizes, the torque t o open or close the valve ...
Athena Engineering S.r.l.
Pressure: 0.6 MPa - 1.2 MPa
... The control valve in the cab has 4 positions and is used in conjunction with the power take-off to achieve the vehicle's lifting, mid-stop, lowering, and power take-off functions. The valve body is made of aluminum profile ...
Pressure: 16 bar
Temperature: 150 °C
... affected by the solid substances, through which may hinder the flow, unlike butterfly valves. Therefore, it is a preferred valve type for impure fluids. Truevalve Knife Valve Body Material: AISI304 ...
Ekin Industrial
DN: 45 mm
Temperature: 180 °C
... Port size 2" BSP Female Thread (ISO 228/1) - Input. 2" BSP Female Thread (ISO 228/1) - Output. Pressure range Min. 0/Max. 150 Housing material Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc ...
DN: 20, 25 mm
Pressure: 1.6 MPa
Temperature: 5 °C - 95 °C
... HTW-71-DV Series electric dynamic pressure balance valve is a dynamic equilibrium with the electric control integration products, mainly for air-conditioning equipment, HVAC system at the end (such as air box, new air handling units, ...
the best suppliers