|
|
TECSI filtering systems are used to separate the solid particles suspended in liquids through the use of filtering elements called cartridges. The range includes filtering systems with SELF-CLEANING and STATIC LINE filters.
The liquid to be filtered passes through a cartridge and deposits the suspended solid particles on the inner surface of the cartridge, coming out with the desired filtration degree. The special design of the filter cartridges permits only the passage of the particles smaller than the the chosen filtration degree.The gear reduction unit, driven by the control unit, causes the rotation of the scraper blades carrier shaft,to remove the impurities that have stuck on it. Blades are available in PTFE, stainless steel * PTFE or a special patented system, suitable for the elimination of fibres that are hard to remove from the inner surface of the filter. All the dirty is the eliminated through a pneumatically controlled total-passage stainless steel discharge valve, fitted on the bottom of the filter.
|
|
Maxflow combines filtration without filter aids - or, if they are required, with considerably reduced quantities of filter aids - and briquetting in a single unit. The main fields of application for Maxflow are particle filtration, the retrieval of recyclable materials and the purification of aqueous solutions.
Maxflow is available in three variants:
- The plug&play solution is a fast and effective solution to a great number of typical process requirements.
- Adaption of the individual components, for example by adding another filter disc to the unit.
- Implementation of a complete system, which can be custom adjusted to meet both known or as yet unencountered customer requirements.
GKD-CompactFiltration's Maxflow concept is a tried and tested serial product with the flexibility needed to be integrated into any customer-specific process. It has proven its efficiency in terms of meeting established standards and as a made-to-measure individual solution. Thanks to worldwide standardized parts and the global presence of GKD through six production facilities, the Maxflow system can be deployed anywhere in the world with equal efficiency. Comprehensive solutions competence, covering all stages from initial layout and dimensioning through to commissioning of the equipment and later expansion or modification to adapt it to changing production conditions, qualifies GKD-CompactFiltration as an efficient systems supplier and reliable technology partner in all stages of the process. |
|
TEKLEEN® has over 50 models from 1/2" to 24," and flow rates from 10-12,000 GPM on a single filter. TEKLEEN® is competitively priced and offers stainless steel filters for the same price as carbon steel. The automatic cleaning process will also save you time and money by practically eliminating maintenance costs.
Let Automatic Filters Inc. meet all your industrial water treatment needs, such as cooling water filters, water tank filters, chiller water filters, sugar juice filters, sand filters, well water filters, r/o prefiltration, spray nozzle protection, white water filters, gland seal filters, screen water filters, industrial water filters, automatic strainers, and more.
Typical Industrial Water Filter Applications
# Cooling Water
# Spray Nozzle Protection
# Waste Water
# Municipal Water Reuse
# Plant Intake Water
# R.O. Prefiltration
# Pickling
# Descaling
# White Water
# Injection Molding
# Gland Seal Protect
# Pasteurizing Tunnel
# Bottle/Can Rinser
# Car Wash
# Vacuum Pumps
# Continuous Casting
# Sugar Juice Filtration
# Water Treatment |
|
This tried and tested automatic filter system is best suited to pressure pulse cleaning by a continous filtrate flow using externally fed compressed air or filtered liquid.
It is used for ultra-fine and fine filtration of liquids.
|
|
| Filter Skids are the compact and immediate solution for many filtration needs. These are small units with flow rates from 10-250 gpm and a filtration range from 3,0005µ-5µ. Small centrifical pumps 3-50 h/p, with any voltage. Available in all SST construction at a very competitive price. |
|
| ... products without technical information |
| |
Varian’s Gas Clean Filter System prevents contaminants entering your GC. Contaminants in carrier gas would result in damage to the column, loss of sensitivity, and unnecessary instrument downtime.
The Varian Gas Clean Filter System, which is positioned immediately before your GC, consists of two elements: the connecting unit and a filter. The uniquely designed filter and connecting unit allow for quick replacement of saturated filters while preventing air from entering your system.
Varian Gas Clean Filters are available for three different impurities; oxygen, moisture and hydrocarbons. |
|
Filters complete of 10 sq/mt microcellulose fiber cartridges our parts n. C014,
on request 20 sq/mt cellulose or 10/20 sq/mt polyester
or 10 sq/mt antistatic polyester cartriges
CODE SURFACE SCOPE H tot POWER
filtration M2 MmH2O Kw
CF 1MV 10 800 120 0.75
CF 2TV 20 1200 150 1.1
CF 2TV/H 20 1500 200 1.5
CF 4/TV 40 3000 170 3
CF 4/TV/Q 40 2500 230 3
CF 8/TV 80 6000 200 5.5
CF 8/TV/S 80 7000 250 7.5
CF 12/TV 120 8000 230 7.5
CF 16/TV 160 11000 210 2x5.5
CF 16/TVS 160 14000 250 2x7.5 |
|
| ... products without technical information |
| |
The Spring is a self-cleaning drum filter complete with a fixed filtering net, for the elimination of magnetic and amagnetic particles from both neat and soluble coolant liquids.
The Spring Range comprises of 6 models capable of purifying from 20 – 300 l/min of neat oil and from 50 – 90 l/min of emulsions.
The filtration efficiency of the drum can be customised according to the customers requirements.
The self-cleaning filters in the Spring Range can be used together with a wide variety of machine tools such as machining centres, deep hole drilling, transfer, grinding and milling machines, machining with special tools requiring high-pressure coolant. The Spring range is particularly ideal for work that involves the removal of metal fines produced using machine tools, abrasives and washing. It is therefore flexible and meets a wide variety of the demands posed by both the engineering and the automotive industries.
|
|
Considerable quantities of metal chips are produced in the automated factories of transformation of
metals. The productivity of the factory can be improved in an important way thanks to a continuous system of removal and
of treatment of the chips, because the operator does not waste any more his time to get rid of the chips but it produces.
An economic system of removal of the chips and treatment of cutting fluids requires however
solutions to measure.
The chips are collected and convoyed out of the production zone thanks to especially studied conveyers.
The long chips or in ball are reduced by crushing in a regular flow of short pieces. Wet chips
are dried and cutting fluids are recycled and cleaned. The process must be continuous and asks only one work
minimum handbook.
The effective and economic solution for the treatment of the chips varies according to the company, according to the provision
workshop, volume and characteristics of the chips.
Sermeto & Arboga-Darenth have the experiment and know-how to bring the most economic solution,
adapted to your Company, either thanks to our standard equipment, or thanks to our integrated systems of treatment of the chips.
|
|
|
|
