|
|
|
|
|
|
MINIDIS - Portable Mini-distillation analyzer
This true atmospheric distillation analyzer is extremely compact, portable and light weight and operates as a fully stand-alone unit and performs exclusively to the latest standard for small scale distillation of petroleum products - ASTM D7344.
MINIDIS uses full automation from sample introduction to heating regulation, vapor temperature registration, volume measurement in the receiver compartment and calculation of the distillation curve from the raw data obtained during the test. This way it achieves the highest levels of accuracy, repeatability and reproducibility.
Want to get D86 test reports? A distillation run and detailed D86 test report takes about 15 minutes (gasoline) depending on the sample type. The automatic operation involves simply inserting the filling tube into the sample container and pressing "RUN". No sample preparation like cooling is necessary, neither special programming of the test conditions or prior distillation knowledge is required.
With the automatic sample introduction, the pre-programmed rinsing cycle and the use of cheap and disposable sample cups, any manual cleaning of the instrument is avoided.
Due to the true portability and rugged housing, the MINIDIS is also the perfect solution for applications, where standard lab instruments cannot be applied, such as outdoor tests or in mobile labs.
|
|
ADU 4
For the examination of motor gasolines, aviation gasolines, aviation turbine fuels, special boiling point spirits, naphthas, white spirits, kerosenes, gas oils, distillate fuel oils, solvents and similar petroleum products.
The modular system allows up-grades on demand with:
- Automatic Dry-Point Detection
- Fire-Extinguisher
- Tempering Unit
- PC or Printer
|
|
Distillation analysis is probably the most commonly performed test in refinery laboratories. The Herzog HDA 620 Distillation Apparatus makes the manual determination of distillation characteristics simple and economical.
The HDA 620 includes everything needed to immediately begin distillation analysis — including ASTM thermometers and glassware.
|
|
| ... products without technical information |
| |
Stuart Water Distillation apparatus, A4000, D4000, W4000
There are 3 levels of specification to choose from in the Stuart water still range:
Aquatron
Fully automatic, borosilicate glass stills with silica sheathed heaters. Available with outputs of 4 or 8 litres/hr single distilled or a double unit producing 4 litres/hr of double distilled water. Capable of being converted to pre-treated feed to remove the need for descaling.
Distinction
Economical borosilicate glass still with silica sheathed heater. Produces 4 litres/hr single distilled water. A safety device is included which turns off the heater and prevents overflow when the collecting reservoir is full.
Merit
A simple glass water still with long life metal heater and twin safety thermostats. Ideal for schools and colleges.
|
|
water distillation machine
WFI production characteristics in compliance with present USP norms
Wide range of units consisting of two, three, four, five or six stages with production capacity from 25 litres/h to 6000 litres/h.
Production of distilled water at 98 °C for correct storage
Highly reliable.
PLC-controlled easy operation.
High-efficiency anti-entrainment system.
Absence of rotary organs.
Models operating either by electric or steam heating
Wide range of optional items to personalize the unit according to customer%u2019s needs and specifications.
|
|
DW SERIES WATER DISTILLERS
* vacuum distiller for water solutions
* water evaporator heating: heat pump
* continuous distillation with automatic waste discharge
* water distiller yield 7 /30/100/200 l/h
* ROTATING BLADE SCRAPER to limit residues
* exhausted water solution recovery by distillation, water recycling in other washings
* thanks to water depuration by distillation, waste solutions are reduced to a minimum
|
|
R 70 FOR 4.0 – 5.0 T: A STRONG ONE!
It clears anything away quickly: This R 70 displays its unequalled strength in technical details and because it’s from STILL, it goes without saying that this R 70 will also adapt to the widest variety of applications.
Also, if required, there is an LP Gas engine (with 3-way catalyst) for this R 70, making it particularly suitable for use in the food and drinks industry. In short: perfect prerequisites made to measure for any task and any driver.
|
|
THE R 70 FOR 6.0 · 7.0 · 8.0 T.
The big R 70 bristles with technical refinements to face the biggest challenges. It is powerful, yet compact and precise, and with far fewer wearing parts than usual. Unlike conventional transmissions with many wearing parts, torque conversion on the R 70 is achieved through an electric motor. In addition to this the R 70 brakes electro-magnetically and wear-free – from full speed right down to a standstill. Hydraulic disc brakes provide additional safety. Thanks to the electronic controller, inching and plugging is also much simpler: without an inching pedal the driver can drive smoothly and slowly and simultaneously hoist and tilt quickly.
For safety: trucks with an 8.0 t capacity come as standard with dual wheels at the front (a narrow track width optional). These can be supplied on request on trucks of 6.0 t and 7.0 t capacity.
|
|
R 70 1.6, 1.8 AND 2.0 T: ECONOMICAL, MANOEUVRABLE AND COMPACT!
The intelligent control and drive technology makes the small R 70 a particularly manoeuvrable truck, characterised by its high safety level, low maintenance requirement, long life and low operating costs. Added to this, because its speed adjusts automatically to the load, the powerful engine, whether diesel or LP Gas, has extremely low fuel consumption and very low noise output.
There's even more: The R 70, with a capacity of 1.6, 1.8 and 2.0 t, impresses because of its maintenance-free multi-disc brake. What do you get from this? Simply lower service costs.
|
|
DRIVE
Powerful 3-phase drive with hydraulic pump for maximum throughput of goods.
MAINTENANCE
1000 hour or 12 months maintenance intervals and short servicing times for minimal maintenance costs.
VARIETY
Standard guard height of 2080 mm, or an option of 1980 mm for low rooms and passing through doorways.
UNIQUE CONVENIENCE
The RX50 already has as standard a speed regulator dependent on the steering wheel lock. For this class of electric forklift truck, you only get this from STILL. If required the RX 50 can be fitted with additional components from the STILL luxury package. The ergonomically shaped and positioned controls ensure a safe and stress-free work place. For example, the small steering wheel and power steering, and the specially damped valve levers for minimum vibration.
|
|
SAFETY
Electrical braking when the drive pedal is released, and the fully automatic hold-on-ramp feature which works without using the brakes, plus the mechanical parking and service brake guarantees safe use at any time. Battery changes on the RX 60 are carried out using a hand pallet truck, low lift pallet truck, forklift truck or hoist. Along with the considerable saving in time compared with conventional craning of the battery, especially with cab variants, this concept minimizes the risk of crushing and damage of any sort that could occur with a heavy swinging battery.
|
|
|
|
|
|
FM-4W
4-way reach truck
STANDARD EQUIPMENT.
The FM-4W 25 four-way truck is a universal unit, which is especially suitable for transporting long products and putting them into stock, as well as normal pallets and containers. Thanks to its four-way design it allows the economical utilisation of storage space with minimal working aisle widths.
DRIVER ’S COMPARTMENT.
- Adjustable steering wheel position with fore and aft seat adjustment allows a comfortable working position.
- Comfort seat features hydraulic damping adjustable to the driver‘s body weight as well as a tilt function (up to 15°). Seat contour shaped to give plenty of untiring support. For added safety the truck can only be driven if the foot switch is depressed.
- The clear view mast with good all round visibility and optimised view through the overhead guard give the driver a very clear optimum overview.
- Control is through four ergonomic levers.
- Comfortable, upholstered arm rest provides supports whilst operating the truck.
|
|
EXU – FLEXIBLE AND ENERGY SAVING.
The EXU is ideally suited for horizontal transportation and can be easily operated without any special knowledge. It saves energy due to its optimised shunt wound drive unit and also due to the end of stroke shut off which automatically stops the pump.
What else makes the EXU stand out? Its particularly light steering due to the ergonomic tiller length and hand grip height. Its compact, short construction also makes the EXU a particularly manoeuvrable truck.
|
|
SV – HIGH, HIGHER, HIGHEST!
Unique features of the new SV12:
The STILL SV12 stand-on high lift pallet truck is designed for a high turn round of goods up to 1,200 kg
Individual possibilities for use, due to its multi-functionality: Serving racking, horizontal transport, loading and unloading lorries, block stacking (truck < 800 mm wide), order picking of goods, working / lifting table
The operating philosophy, which conforms to that of a forklift truck, means greater safety: right hand driving, lifting / lowering and holding; left hand steering
In day to day use the comprehensive ergonomic studies pay off: with the SV12, even after many hours, the operator can still concentrate on work.
|
|
R07 – MORE FREEDOM FOR DRIVERS!
Even more driver comfort due to the ergonomic build: greater leg clearance, damped seat and electric heater.
Even more powerful and easy to maintain due to innovative three phase technology.
Clear all round vision and a direct view of the trailer load.
|
|
R06 - SMALL IN SIZE - BIG ON POWER
This little three wheel electric tractor is a real power house. It is fitted with a powerful electric motor which runs almost silently and gives impressive driving performance and excellent acceleration. It is also very robust and environmentally friendly.
Along with the hydraulic drum brakes the R06 also has electrical braking, which operates automatically when the drive pedal is released or when the direction of drive is changed.
This is not only safer but also very economical because the energy released is fed directly back into the battery - increasing the working time of the R06.
Ergonomic construction and high level of comfort provide well-being in the workplace
|
|
|
|
