- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Screw-in fitting
Screw-in fittings
Diameter: 8 mm - 15 mm
Operating pressure: 20 bar
Material Code: PTFE Sealing ring SR-510TP ..., Metal compression ring SR-510TZ ..., Twin Cut Ring SR-510TZ ..., Sealing occurs on the metal sealing edge on G-and M-threads and on the actual thread on R and NPT threads.
Schwer Fittings
Diameter: 6 mm - 16 mm
Operating pressure: 315 bar - 630 bar
PN 630 only for tapered tapped holes, otherwise PN 400, Operational safety on male stud connection is 2.5 times the stated pressure. Operational safety on the pipe connection is 4 times the stated pressure
Schwer Fittings
Diameter: 6 mm - 38 mm
Operating pressure: 100 bar - 630 bar
Operational safety on male stud connection is 2.5 times the stated pressure. Operational safety on the pipe connection is 4 times the stated pressure
Schwer Fittings
Diameter: 0.4 mm - 19 mm
COVAL proposes different models of male and female fittings adapted to the different suction cup ranges.
Diameter: 12, 10, 8, 6 mm
Range of special vacuum-tight fittings, fitted with O-ring (blue). . 100% vacuum-tight and improved circuit sealing . Can be removed and reinstalled without requiring preparation of the tubing . Adjustable fittings for improved vacuum ...
Diameter: 0.13 in - 1.5 in
Operating pressure: 345 bar
The WEH® TW03 quick connector is especially designed for testing components with internal threads. Only hand-tighten the quick coupling into the thread until the o-ring seal contacts the test piece. The TW03 seals without wrenches, sealants ...
WEH GmbH Verbindungstechnik
Diameter: 16 mm
Operating pressure: 400 bar
Hydraulic Couplers Fast and clean changes Do you have hydraulic applications where lines are frequently connected and disconnected? Do you want to do this quickly, cleanly, safely, and easily? We have the optimal solution for you: ...
WEH GmbH Verbindungstechnik
Diameter: 16 mm
Operating pressure: 400 bar
Hydraulic Couplers Fast and clean changes Do you have hydraulic applications where lines are frequently connected and disconnected? Do you want to do this quickly, cleanly, safely, and easily? We have the optimal solution for you: ...
WEH GmbH Verbindungstechnik
Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, ...
AIR Logic
Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, ...
AIR Logic
Diameter: 0.062, 0.09, 0.125 in
Operating pressure: 0 psi - 125 psi
Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections are a clean, ...
AIR Logic
Diameter: 15, 22 mm
Operating pressure: 10 bar
Quickly and easily connects metric to imperial pipe with an integrated wall plate. John Guest brass wingback elbow push-fit fitting connects metric to imperial pipe. The integral wall plate ensures the fitting can be easily mounted. ...
JOHN GUEST
Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar
The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. ...
Nitto Kohki Europe
Diameter: 14 mm
Operating pressure: 7 bar
These quick-connect couplings are very easy to connect. The plug fits into the socket with just a simple push of the hand. They are lightweight and compact in size. Their bodies are structured from chrome-plated brass which imparts a ...
Nitto Kohki Europe
Diameter: 0.13 in - 1 in
Operating pressure: 15, 10 bar
The Hi Cupla model manufactured by Nitto, is a low-pressure quick coupling that is suitable for the connection of factory air supply with pneumatic tools. This tool offers important structural parts of steel models which feature a heat ...
Nitto Kohki Europe
Diameter: 0.5, 0.75 in
Body Material: SS316L Connection Size: ½"NPT(F) x ½"NPT(F) ¾"NPT(F) x ¾"NPT(F)
Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar
MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings are supplied complete ...
Maximator GmbH
Diameter: 0.25 in - 0.56 in
Operating pressure: 0 bar - 4,500 bar
MAXIMATOR fittings and bolted unions from the 4,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 4,500 bar This series consists of multipurpose bolted unions and the attachments ...
Maximator GmbH
Diameter: 0.31 in
Operating pressure: 0 bar - 10,500 bar
MAXIMATOR fittings and bolted unions from the 10,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 10,500 bar This series consists of multipurpose bolted unions and the attachments ...
Maximator GmbH
Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar
The Z-swivel from Exitflex is the reference in the automotive industry. Its unique design provides ease of use and prevent injuries for painters and workers in all sorts of industries. Multi-directional 3-axis movement
Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar
Five, high-precision metallic parts, made out of 303 Stainless Steel One friction washer, made out of PTFE One spring seal, made out of ultra-high molecular weight polyethylene Only 51 grams HIGHLIGHTS Rated at a maximum working pressure ...
COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected ...
Zenit
COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without ...
Zenit
COUPLERS DAC-V vertical discharge bottom couplers for use with pumps up to 1300 kg. Fixing by means of sliding flange or hook [KGP] (discharge DN350) with double guide pipe. A PATENTED guide pipe connection system that reduces mechanical ...
Zenit
Certification : DIN ISO 9001 - 2000 Quality : 3D tactile measuring – 3D scanner – Test – Certificates ... Material Certification : Forging Material according EN 12420 & EN 12165 Material : All Brass types , Copper , Nickel Silver
LUXECASTING INTERNATIONAL GROUP
Diameter: 0.5 in - 2 in
Operating pressure: 40, 18 bar
Normative Regulation : EN 11423 previous DIN 2826 Coupling Material : Carbon Steel , Stainless Steel , Brass Gaskets Material : NBR , FPM, PU , Novapress® Connection Mechanism : Male -ISO 2999 & Female -ISO 228 (flange on request)
LUXECASTING INTERNATIONAL GROUP
Diameter: 0.5 in - 4 in
Operating pressure: 25 bar
Normative Regulation : EN 14 420-5 Coupling Material : Stainless Steel, Brass (other on request) Gaskets Material : PU , PTFE (other on request Connection Mechanism : Screwing male (GA) & female (GI) thread EN ISO 228-1
LUXECASTING INTERNATIONAL GROUP
Adaptation of up to 12° in all directions. Independent return to zero position.
Diameter: 8 mm - 50 mm
Operating pressure: 0 bar - 2 bar
"Push & Seal" plastic quick connectors are an ideal means for the secure connection of cooling water and heating hoses as well as charged air systems.Spigot Locking function Simple spigot 0-ring is on the inside to prevent damage to ...
NORMA GROUP
Diameter: 125 mm - 700 mm
Operating pressure: 10, 16 bar
Structure: • stator (outer part) and rotor (inner part) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...
Diameter: 8 mm - 50 mm
Operating pressure: 100, 40 bar
Structure: • stator (outer part) and rotor (inner part) joined by a single-row ball bearing • for-life lubrication provided in the factory • female thread according to ISO 7-1 (DIN 2999) Materials: • Basic unit with threaded connection: ...
Diameter: 8 mm - 50 mm
Operating pressure: 250, 350, 420, 100 bar
Structure: • stator (outer part) and rotor (inner part) joined by a two-row ball bearing • for-life lubrication provided in the factory • female thread according to ISO 7-1 (DIN 2999) Materials: • Basic unit with threaded connection: ...
Diameter: 6, 4, 8, 10 mm
Operating pressure: -0.99 bar - 15 bar
Connection Tubes Tube in general. PA6, PA11, PA12, Polyethylene, Polyurethane, PTFE, FEP. Temperature Minimum Temperature -15 °C Maximum Temperature +225°C Threads Tapered gas in conformity with ISO 7.1, BS 21, DIN 2999. Parallel ...
AIGNEP
Diameter: 12, 6, 5 mm
STRAIGHT MALE ADAPTOR WITH METRIC THREAD The 1000 serie are push-on brass fittings to connect safely with thermoplastic tubes in pneumatic and fluid applications. The sealing is metallic and the connection is very easy thanks to the ...
AIGNEP
Diameter: 0.375, 0.25, 0.125 in
Operating pressure: -0.99 bar - 15 bar
MALE BAYONET Connection TubesPlastic tubes: PA6, PA11, PA12, FEP, PTFE, Polyethylene, *Polyurethane, Braided PVC, Braided polyurethane for art.1810. *For Polyurethane hoses it is required a minimum hardness of 98 shore. TemperaturesMinimum ...
AIGNEP
Diameter: 0.25 in
Operating pressure: 325 bar
zinc-plated. Max. operating pressure 325 bar. Since the clamping modules after blow-off of the opening pressure are mechanically locked, the hose is then uncoupled by means of the quick couplings. The advantage of this is that there ...
Diameter: 14 mm - 66 mm
Operating pressure: 10 bar
Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 16 mm - 63 mm
Operating pressure: 16 bar
Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 0.375 in - 2 in
Operating pressure: 16 bar
Pressure rates - PN16 Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Praher Plastics Austria GmbH
Diameter: 2 mm - 16 mm
STRAIGHT FITTINGS - BARB-STYLE CONNECTION ► For assembling with hose clips ► Straight version STRAIGHT FITTINGS - QUICK CONNECT STYLE Cost reduction through quick assembly ...
Diameter: 2, 4, 6, 8 mm
ANGLED FITTINGS- BARB STYLE CONNECTION ► For assembling with hose clips ► Angled version ANGLED FITTINGS- QUICK CONNECT STYLE Cost reduction through quick assembly and disassembly Angled and swivel-mounted
Diameter: 50 mm - 150 mm
PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, ...
Masterflex SE
Diameter: 50 mm - 150 mm
cast-on PU threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching ...
Masterflex SE
Diameter: 32 mm - 300 mm
screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently ...
Masterflex SE
Diameter: 16 mm - 125 mm
Operating pressure: 16 bar
PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings designed for conveying ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.38 in - 4 in
Operating pressure: 16 bar
Series of fittings for pipes conveying fluids under pressure with threaded joints. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with regard to most acids ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.5 in - 8 in
Operating pressure: 15 bar
Series of fittings for pipes conveying fluids under pressure with solvent weld and threaded joints according to British Standard. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent ...
FIP - Formatura Iniezione Polimeri
Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar
Flexible silicone adaptors Custom made flexible adaptors in FDA and USP VI platinum cured silicone specially designed for food and pharma processing. Applications Adaptsil is recommended to: - Compensate system vibrations as well ...
Operating pressure: 5,000 psi - 20,000 psi
This fitting range is a solid piece design with a hose insert made up of the following 3 options: Male API, NPT and GOST. Termination ends comply with: API 16A, API 6A, API 5B, API 5L, API 16BX, API 6B and API 6BX. Fittings designs, qualifications ...
Diameter: 0.25 in - 0.38 in
Operating pressure: max 8.3 bar
The PLC series of products comes with a 1/4" flow and has been proven to work all over the world in applications for various industries. This is mainly due to the various configurations and sizes made available by the manufacturer. The ...
CPC - Colder Products Company
Diameter: 6.5 mm - 44 mm
The IVG conduit fittings are made of specially modified polyamide 6, thermoplastic elastomer and nickel-plated brass. The materials are halogen, phosphor and cadmium-free.The IVG conduit fittings feature the following advantages:Quick ...
MURRPLASTIK SYSTEMTECHNIK
Diameter: 5, 7.5, 2.5 mm
Operating pressure: 10 bar - 35 bar
Series 141 mini couplings are among the smallest couplings on the market. The Series offers CEJN’s popular product features in a small package and is suitable for fluid and vacuum lines, as well as pneumatic applications. Technical ...
CEJN
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining