|
|
The Magnus AJA LIF is a heavy duty, low maintenance immersion washing and processing machine that mechanically agitates the parts in a hot or cold cleaning solution.
One Tough Workhorse - the standard AJA LIF has a load capacity of 2200 lbs. of parts, and heavier optional load capacities are available (see available options).
Three Agitation Stroke Lengths - selection of short, medium or long strokes engineered to allow cleaning a variety of parts.
Thorough Cleaning - reaches difficult interior areas of parts because moving parts through cleaning solution creates greater cleaning effect than simply moving liquid around parts.
Cost Effective - better cleaning minimizes costly production rejects and eliminates hand scrubbing.
Air Powered Lift/Agitation System - provides greater agitation speed than comparable electromechanical lift devices. |
|
Drycleaning Machines are specialized for the pre-cleaning and drying of all sorts of machined parts made of metal or plastics. They work completely with vacuum chambers, aspiration and blowing air. No washing liquids, detergents or solvents are needed. The unique result: Dry parts, complete cleaning from metal chips and a high recycling rate of the oil / emulsion, which is taken from the parts. The liquid is filtered and can be re-used.
We design and manufacture customized Drycleaning Machines for your work-pieces, which can be integrated into your manufacturing process quiet easily. Special loading- and unloading systems are engineered according to your request, e.g. with pneumatic grips, step-by-step conveyors or work piece receivers. |
|
| The Mono-stage and Single-chamber systems, series M100, are suitable for cleaning metal component parts of various shapes and of small and medium size. These systems, normally installed on production lines or in repair workshops, are able to achieve particularly good results in eliminating emulsified oils, pastes and machining shavings. |
|
By combining hands-off, total immersion cleaning, easy part load/unload, vertical
lift platform agitation and optional Graymills Superflo pump jet action, the Liftkleen
offers the most intensive, efficient immersion cleaning system available. Complex
parts, stacked or nested parts are no problem.
The T and L Series Liftkleens offers a variety of sizes and options, including pump,
agitation, ultrasonics, and automatic control of cleaning cycles, that make it the
easiest-to-use, large size cleaner on the market. One touch control of the pneumatic
air system and electronic controls turns multi-function operation into a simple step. |
|
| The FlexTRAK system offers high-throughput capability of up to 480 substrates or process carriers per hour. Its small chamber volume and proprietary process control enable unmatched short cycle times. |
|
In-Line Systems - TunnelSonics
Individual Small Parts Conveyorized Ultrasonic Cleaning Systems :
The TunnelSonics parts washers are a continuous conveyorized in-line flow Neptune Radial systems. The TunnelSonics products are is ideal for applications such as In-line continuous product cleaning of small parts from:
- screw machines
- stamping operations
- lapping and similar operations
- machine parts
- part assemblies
- fasteners
- springs
- header operations
Where continuous product flow is preferred, the In-Line system can clean, rinse and dry at speeds up to 20 feet per minute in mild aqueous solutions.
Cleaning is achieved by passing the product through exclusive Power Sonics RADIAL 360° transducers. Cavitation levels are 10 times, or more, as great at the same power input as conventional flat type transducers. Floor space is optimized since systems are generally integrally mounted on their own bedplate, also simplifying installation. |
|
Safely and Quickly Removes Tough Materials
Flow International Corporation's A-3000 ultra light hand tool combines the power of ultrahigh-pressure (UHP) water (and its relatively low water volumes) with extremely high nozzle rotation speeds. The result is a versatile tool that offers excellent removal rates for a wide variety of industrial cleaning projects.
This multi-purpose tool offers superior performance and control. Rotating a variety of multiple-orifice tips at up to 3,000 rpm, the A-3000 delivers as much as 6.5 gallons (22.7 liters) per minute of ultrahigh-pressure water. It is the only hand tool rated for operating pressures of 45,000 psi (3,100 bar).
Multiple Applications Multiply the Savings
The A-3000's high rotation speed makes it the ideal tool to remove the toughest coatings, including epoxies, resins, paint, rust, scale, calcium deposits and oxides. And because it is air-powered, the A-3000 is easily operated from any compressed air supply.
With its unmatched productivity and low water volumes, the A-3000 is an environmentally-sensible alternative to grit blasting, burning and chemical removal. The A-3000's light weight reduces operator fatigue so workers can work longer, and more safely.
Benefits
Reduced operator fatigue improves safety and productivity
Pneumatic power means no oil spills
High removal rates with minimal waste water
Standard Features
Remotely located on/off valve
Advanced ergonomic design
Lightweight
Patented swivel design allows quick change of high-pressure seals and easy maintenance
Second safety trigger requires operator to have both hands on tool for safe operation
Runs from any compressed air source with greater than 32 scfm at 90 psi
Flow patented HornetTM nozzles
Specifications
Tool weight: 11.0 lbs (4.98 kg)
Maximum operating pressure: 45,000 psi (3,100 bar)
Air required: 32 scfm @ 90 psi
Working rotation speed: 3,000 rpm
Motor horsepower: 0.7 hp (0.5 kW)
|
|
High Pressure Spray Gun/Lances
Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 - 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
|
|
We are manufacturers of high pressure guns and wholesaler for Widoberg products.
Therefore if you wish to have a new automatic - or mecanic installation we offer you the most appropriate solution for your requirements.
We have highly qualified staff with a large experience in designing and adjusting installations. |
|
The Atlantis microplate washer is renowned for its excellent price/performance ratio. Equipped with features usually only available as optional extras, the Atlantis is the ultimate choice for discerning laboratories. Operation is simple, with the two line alphanumeric display and 5 soft keys for easy programming; the Atlantis allows up to 50 wash programmes and 20 plate types to be permanently stored. In addition, the plate carrier is detachable for cleaning and the quick changing of manifolds simplifies the use for different plate types The unique manifold position sensor allows a precise height adjustment which minimises residual volumes. Digitally controlled aspiration and dispensing pumps
provide high accuracy and low noise levels. |
|
The CIP unit, together with our cleaning fluids, facilitates cleaning of the plates in an efficient and caring manner, without reassembling of the plate heat exchanger. The CIP unit is therefore a good investment when reliability centered maintenance is applied to secure your production. The unit can be used for cleaning of anything from evaporators, steam-boilers, hot water circuits etc.
|
|
Universal Cleaner Lubricant
All surfaces
Biodegradable as per OECD 302 B
Cleaner, protector, lubricant, penetrant
Dielectric strength 35000 volts |
|
SPEEDY CLEAN - MODEL SPEEDY CLEAN
CAPACITY 2"
PNEUMATIC INPUT 6 BAR
AIR CONSUMPTION 7 LT/MIN
EXIT PRESSURE 60 BAR
TANK CAPACITY 33 LT
WASHING LIQUID SOLVENTE
WEIGHT 74 KG
DIMENSIONS L x D x H 530 x 1040x 960 mm
WASHING DEGREE NAS 1638: 8 ISO 4406: 16/13
|
|
The only self-cleaning, self-regenerating system on the market
Improved worker safety and comfort
No monthly service fees
Breaks down contaminants into water and CO2
Maximum load capacity of 220 pounds
|
|
Applications:
-Medium to heavy-duty cleaning
-Extra wide and deep wash platform for large or bulky items
-Perfect for transmission shops; manufacturers; heavy-duty equipment cleaning, and heavy-duty repairers/rebuilders
-Uses 140° Flash or VOC Exempt Solvents (SCAQMD Certified) with recovery hood |
|
Applications:
-Light to medium-duty cleaning
-Usually 3 or more employees
-Perfect for general auto service and repair, fleet maintenance, industrial maintenance.
-Uses 140° Flash or VOC Exempt Solvents (SCAQMD Certified) with recovery hood
-ETL, CSA and EU certified |
|
Applications:
-Light to medium spot cleaning at remote sites or where parts cannot be transported for cleaning.
-Can be shared by everyone in the shop. Extends the use of your existing parts cleaner.
-Perfect for general auto service and repair, fleet maintenance, industrial maintenance.
-Uses solvents supplied by your main parts washer.
-ETL, CSA and EU certified |
|
| ... products without technical information |
| |
|
|
