High precision pressure regulator
0 - 8 bar | GS series
METAL WORK
GS is a series of precision regulators, designed for rapid relief of overpressure
and a high flow rate.
They feature identical and opposing regulation valves on the inlet and outlet
sides. This enables the regulator to behave symmetrically - precise regulation
with a high rate of flow both in and out.
The pressure setting is virtually insensitive to changes in the upstream pressure
(see diagram below), whicn guarantees accuracy even when the mains
pressure fluctuates considerably.
A slight escape of air is required for correct operation of the regulator - it
must not be considered a defect.
The regulator can be fixed using the through holes in the body or a bracket
accessory.
The body has a 1/8" pressure gauge fitting.
GS regulators are suitable for applications requiring good accuracy in
maintaining the pressure and a certain sensitivity in relieving pressure peaks,
e.g. to supply low-friction cylinders, reel tensioners ana coil winders.
Two sizes of compressed air fitting are available: 1/8" and 1/4".
Three different setting ranges are available: 0+2 bar, Oh-4 bar and Oh-8 bar.
-
zoom
