Other electrical measurement equipment

The Earth Magnetometer Model EM2 measures small variations from location to location in the Earth magnetic field associated with buried magnetic masses. Unlike metal detectors, a magnetometer signal is not attenuated by rock, dirt, mud or water, so targets ...

... TG1 is a capacitance and dissipation factor measuring bridge, featuring manual balancing using analogue zero indicator or fully automatic balancing - for high voltage insulation diagnostics, allows precise measurement of capacitance and dissipation ...

... The TechCheck Model 830 is very easy to utilize and it has multi function calibrator. The TechChek 830 sources and reads like a milliamp or voltage calibrator, as well as simulates and measures T/Cs & RTDs like a temperature calibrator. It also generates ...

The F6150e is a power system simulator that is available in various models based on the specific needs of the user. It is a solution to assess the protection system for analog testing of 1A and 5A protection units; assessment is possible for testing an ...

The PDA-IV is a portable instrument specifically designed to monitor PD in hydro-generators equipped with PDA Couplers. The PDA-IV instrument determines the magnitudes, rates and polarities of voltage pulses created by partial discharges. Additional parameters ...

Primary current: 25 A

... Hall Effect Current Sensor, Closed Loop These products are used in measurement of Alternating and Direct Current in electrical and electronic equipments such as SMPS, UPS, industrial drives AC drives & DC drives, Control in process application like light ...

... 1. It can be used for the formation, capacity division and detection of power batteries and power batteries. 2. Modular design, each module is an independent 1-8 channels. 3. Each channel can be set in constant current charging and discharging, ...

... Isolation amplifier with current or voltage input 4 selectable input ranges and 4 selectable output ranges 12-30 V supply, isolated from internal electronics Built-in supply for external transmitter Galvanically isolation between input and output Made ...

... The 122-15 Compression Tester is a servo-hydraulic solution for testing the compressive strength of larger pallets, units & loads. The Model 122-15 is a servo-hydraulic compression tester designed to evaluate the compressive strength of individual ...

... The Raptor system consists of a main ‘master’ unit and a number of optional units that enable the execution of virtually any commissioning or routine testing jobs on the primary equipment of medium and high voltage electricity installations. Massive ...

The screw connection of the ELH is made of PVC, the probe body of the ELH is made of the materials PE, PPH, PVC or PVDF, depending on the requirements. The electrode tips are made of stainless steel 1.4571, Hastelloy B, Hastelloy C, titanium, tantalum ...

... Dimensions (WxHxD) 96 x 48 x 89 mm Display range 0 - 99999 Support points for linearizing the measurement input 30 MIN / MAX value query that can be switched off Operating lock via 4-digit code Membrane keyboard ...

... External flammability tester The battery External flammability tester is also called external fire exposure test machine,it is applicable to the standard ECE R100 and UL 2580. Standard test requirements 1. Test Object: Battery pack and system. 2. ...

Primary current: 30 A - 50 A

... Dimensions in mm: - 70 x 50 x 34 mm Analogue output: - 0-20 mA or 0-10V without auxiliary supply Primary bar: - 20 x 10 mm Round conductor: - ⌀ 16 mm Current Transformer and transducer in one housing • Standard analogue output 0 - 20 mA / 0 - 10 ...

The Transducer, manufactured by ENTES, generally functions by converting electrical signals on their input into analog signals. In addition, this type of transducer is typically applied in control as well as in automation devices.

... The OM 352 series are simple 3 ½ digit panel programmable instruments designed for maximum usefulness and user comfort while maintaining their fair price. Type OM 352UNI is a multifunction instrument with the possibility of configuration for 8 different ...

... Effective and easy measurement The probe consists of a stainless-steel head with PVC sheath, a body with integrated electronics and a durable cable. The XB1-S probe measures the current between electrodes and converts it to specific electric conductivity ...

We need a proper grounding to benefit our daily activities and facilities. It helps us not to hurt due to faulty equipment or home appliance installation. Damage from lightning strikes and induced voltages also hazarded to us. Over time, ground systems ...

The PQI-DE is a voltage and power quality measurement device, fault recorder and residual current measurement device all in one. The device combines numerous functions. It can be used as a power quality interface to fulfil network quality standards or ...

Primary current: 200, 600, 2,000 A

... All ZES ZIMMER power meters of the LMG series, the current sensors of PCT series and the voltage sensors of the HST series are carefully tested, adjusted and calibrated prior to shipment and are subject to strict quality controls. ZES ZIMMER guarantees ...

... Electrical rotating machines must fulfill ever-increasing requirements of electrical power systems and at the same time optimize electrical energy production. Any malfunctions or unnecessary and unplanned outages can cause extensive material damage. ...

Voltage: 1,000, 200 V
Current: 1, 3, 1.5, 10 A
Power: 20 W

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, ...

The PRIMES PowerMeasuringModule (PMM) is a robust laser power measurement system that determines optical power directly in the production zone. Thanks to the fieldbus interface, the PMM can be easily integrated into equipment controllers – various systems ...

... Single cell voltage measurement system LENA-PRO 3/64 A device for monitoring single cell voltages of a fuel cell. Product advantages • basic device with 32 analog channels upgradeable up to 128 • intelligent signal processing by microprocessor technology • ...

... Current and voltage measuring device with CANopen interface • Current transformer coil inputs (primary 35A to max. 1A secondary) • Voltage measurement on each phase up to 400 VAC • Phase sequence detection for rotation direction detection • Detection ...

PTM600-S can simultaneously detect toxic and combustible gases, suitable for the dangerous or hazardous space, such as tunnels, culverts, storage rooms and other restricted spaces where the air can not be circulated. The system could be easily transport ...

Primary current: 0 A - 32 A

... BRCM01C can be seen as either a residual direct current monitoring device (RDC-MD) compliant to IEC 62955 or an AC/DC RCM compliant to IEC 60947-2-(M) and IEC 62955 because the device has separate Pins for solely DC trip output and AC&DC trip output. With ...

... Controlmatik probe M 1122 is designed for continuous measurement of pH in swimming-pools, potable, waste and industrial waters. With special versions of measuring electrodes, it can also be used for measurement of other media. KEY FEATURES on-line ...

... The 740 Surface Resistance Checker is a pocket-sized instrument providing fast and repeatable measurements of conductive, static dissipative and insulative surfaces. The 740 measures both surface resistivity and resistance to ground. It uses the ASTM ...

Primary current: 0 A - 200 A

... UL2808 XH-SCT-0750 Split Core Current Transformer CTs Specifications:  1.Rated  current:0-200A 2.Rated output:mA or mV(0.333V) 3.Rated Voltage：0.66KV 4.Insulation Voltage：5400V CATIII 600V or CATIV 250V 5.Rated Frequency：50HZ/60HZ 6.Operating ...

TESLA 4000 is an easy-to-use and cost effective, state-of-the-art, multi-time frame (simultaneous) digital fault recorder. Its integrated Phasor Measurement Unit (PMU) functionality streams synchrophasor data for wide area monitoring. Enabled with IEC ...

Temperature: 23 °C
Noise level: 94 dB

... • 94dB Sound Calibrator At 125Hz And 250Hz • Accurate And Simple To Use • Fits 1inch And 1/2inch Microphones • Low Battery Indicator • IEC 60942(2003) Class 2, Ans1.40-1984 Total Harmonic Distortion: < 4% Reference Condition: Temperature 23℃(73℉) Static ...

... Products Introduction: This product is mainly suitable for the shell protection level test (IP protection level test) of various parts of vehicles, outdoor lighting, outdoor lamps, household appliances, communication products, signal devices and other ...

... PLEASE ASK US FOR ANY SPECIFIC REQUIREMENTS. • Sonic pulse velocity system • Ultra sonic pile testing system • Concrete reinforcement detector • Vibration reinforcement detector • Dilatometer • Crackmeter • Retractometer • Pile integrity tester • ...

Current: 2 A

... Family - F040 Pitch (mm/mil) - 1,00 / 40 Temperature - -45°C...+100°C Dimensions - Total length (mm) - 35.9 Projection height (mm) - 7 Tip style diameter (mm) - 0.6 Barrel diameter (mm) - 0.62 Materials & surfaces - Tip style - 15 Tip ...

Standard probes (GKS) without collars have proven themselves time and again to be ideally suited for ICT and FCT. Depending on the working stroke of the test fixture or the components and test points to be contacted, different installation heights are ...

The Octiv VI probe system is an in-line RF voltage, current and phase angle measurement system. It can measure a single fundamental frequencies and its harmonics at 1% accuracy and 1μs time resolution. Each system has a drop down menu with a choice of ...

Temperature: 200 °C - 1,100 °C

... The PTB 1100 is a very high temperature calibration furnace capable of generating temperatures in a range from 200 and 1100 ºC. It is ideal for calibrating long and large diameter high temperature thermocouples. Benefits: - Temperature Range: 200 ...

... Powador-go Current sensor for direct and alternating current. The Powador-go enables the user to measure direct and alternating currents with ease. As an accessory for the large Powador-proLOG data logger, the current sensor has two additional options: ...

Temperature: -10 °C - 60 °C
Pressure: -0.85 bar - 700 bar

... KELLER pressure calibrators are highly accurate calibration instruments which are available for the following pressure ranges: -0,85…10 bar (LPX), -0,85…25 bar (MPX) or 0…700 bar (HPX) (special measurement ranges are available on request). The low-pressure ...