- Detection - Measurement >
- Electrical Measurements >
- Other electrical measurement equipment
Other electrical measurement equipment
Measuring transducers MT 4xx are intended for measuring and monitoring single phase or three-phase electrical power network. It has power accuracy class 0,5, according to the standard EN 60 688 and is intended for electricity distribution ...
Iskra d.d.
Separate digital tester readout for use with LT flow meters & LTR flow meters with built-in load valve. Display flow, pressure, temperature, speed. Flows up to 1500 lpm (400 US gpm) Pressure up to 480 bar (7000 psi) Temperature up ...
This is a handy type calibrator that is highly portable. Leak standard can be generated simply by adjusting the dial. By changing the laminar. · Adjustable inlet pressure · This calibrator is compatible with a maximum of 3 flow-rate ...
Gain: 0 dB - 5.5 dB
MG3850A has the characteristics of high gain, low profile, high sensitivity, multi-system compatibility and high reliability, which can effectively meet the needs of users. MG3850A is a built-in surveying antenna that is widely used ...
Guangdong MIDE Communication Technology CO.,LTD.
Colour determination and trash. This device determines the colour of the fibre material as well as the trash content. Additionally, the colour level, the level of seed particles and the Cie lab colour data are tested. Autolab OT is ...
Professional ORP/redox probes Introduction ORP (redox potential, also referred to as redox) is a measure widely used in biochemistry, environmental chemistry and water treatment. SEKO's professional-grade ORP probes are designed ...
Ensures uniform, reproducible process quality. Provides an interface for data exchange with any Oetiker electronically controlled installation tool. AC or DC operation. Convenient carrying case. TECHNICAL DATA OVERVIEW All types ...
Oetiker
Meet the next generation Hipot Tester. The new Hypot® Series raises the bar for safety and efficiency in production line Hipot Testers. Whether your application requires AC Withstand tests, DC Withstand tests, or Insulation Resistance ...
Associated Research
CANcheck allows users to analyze CAN networks during commissioning, maintenance and helps searching faults. This battery-operated, hand-held device connects to the CAN network to be tested and operates using a clearly-structured menu. Features ...
Primary current: 0 A - 1,000 A
Hall effect transducers ø 35mm To measure unidirectional direct or pulsating current (average value) Input up to 400A d.c. Standard signal output 0...20mA and 4...20mA or 0...10V Field-selectable output 0...20mA and 4...20mA 4kV ...
IME Spa
With the magnetic polarity tester - also called magnetic pole indicator or polarity checker - you can determine the orientation of a magnetic field by measuring whether a magnetic pole is a magnetic North (N) or South (S) pole. Suitable ...
Noise level: 94 dB
The SC-2120A is a simplified sound calibrator for use in operational checking of acoustic measurement systems. * Accomodates 1/2 inch microphones. * Long battery life (up to 20 hours of continuous operation). Applicable ...
Onosokki
The D200HD is a two-channel, picometer scale, capacitance based, displacement measurement instrument for conductive targets. Features Resolution ≤ 0.0000001 √(Hz) FSR Temp Amplifier useable from 0-40°C, Preamp up to 50°C, Probes ...
Fault Annunciator with 8 Windows Power Supply : 90 to 270 VAC Indivdual windows can be programmed for 6 different colors. Fault detection selectable for NO/NC sensing and through MODBUS RS485 serial communication ...
The Uster Tester 6-C800 sets the standard for filament yarn evenness testing and plays a central role for every quality-driven producer. Overview Specialized solution for filament yarns In filament yarns, even the smallest fluctuation ...
Temperature: -20 °C - 60 °C
Pressure: 1,000 bar
Voltage: 0 V - 10 V
Accurate, high resolution, compact, rigid Pressure ranges from 0...250 mbar to 0...6000 bar, as well as vacuum, compound and absolute ranges Changeable reference pressure sensors LR-Cal LPC-S All standard pressure units (plus one self-definable) Conversion ...
DRUCK & TEMPERATUR Leitenberger GmbH
Engine Testing System This system has an important role to thoroughly check and improve the quality of engines, which can be called "the heart" of automobiles and machines. We provide comprehensive systems which cover all processes ...
Handling Tools S&C Handling Tools provide convenient, easy operation of S&C fuses, cutouts, and disconnects, as well as those of other manufacture. Each tool consists of a detachable fitting specifically designed for a particular handling ...
S&C Electric Company
Sonel MPI-540-PV is an extremely universal meter, designed in particular for testing photovoltaic installations. The device allows a complete set of tests on the DC and AC side – in accordance with the guidelines of EN 62446 standard. ...
Sonel SA
Spectral range - 200 – 1100 nm Highest sensitivity wavelength 960 nm Active area - 7 x 7 mm Spectral sensitivity 9.5 х 105 V/W Output shift voltage - 50 mV Max. output voltage - +5 V Bandwidth ...
Ostec
Frequency: 50 Hz - 60 Hz
AMH-500 Hysteresisgraph is a DC automatic measuring system for characterization of hard magnetic materials. AMH-500 meets the International Standard IEC 60404-5 and ASTM A977. Measurements are performed either at room temperature or ...
Laboratorio Elettrofisico
Zero-Gauss Chamber For repeatable measurements of residual magnetism at ferromagnetic parts in combination with Gaussmeters.
The Torque Calibration Tool helps our customers easily measure the application torque of their screw-on capping heads and the removal torque of applied closures. • Designed for plastic screw-on caps • Handheld tool, pre-set for all ...
Zalkin
SDX/SHJ Dynamometer and echometer calibration equipment Application Area SDX/SHJ Dynamometer and echometer calibration equipment is mainly used for the calibration of various dynamometers used in oilfield. It can meet the calibration ...
Hubei Jianghan Petroleum Instrument & Meter Co., Ltd.
High-Current Test Probe up to 400 A for use in extreme production environments; compact design; Test of high currents possible; compensation for axial deviations and compensation of contact surfaces unevenness
PTR HARTMANN GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining