Other electrical measurement equipment

811 companies | 4,105 products
friction testing device
friction testing device
VeslicTest

... This device enables the accelerated ageing of watch components by rubbing of a wet or dry felt. A motorised unit, on which samples are fixed, makes to and fro motions. Tests are realised according to the NFG52301 standard. A tensioner system allows ...

current measuring module
current measuring module
OrionMX

... Two new AC measurement cards are available for the OrionMX: • The AC Meter Expansion Card (M1) - Provides a full set of accurate AC measurements from Bus 1. It also provides Phase A, B and C voltages from a second bus for source transfer and synchrocheck ...

See the other products
NovaTech Automation
temperature calibrator
temperature calibrator

Temperature: -80 °C - 1,700 °C

... A wide range of calibration equipment for highly accurate sensors, with temperature ranges from -80 ° C to 1700 ° C Termya offers the possibility of supplying all products calibrated in external laboratories under international standards ...

temperature calibrator
temperature calibrator
SMicroCal 1

Temperature: -270 °C - 1,768 °C

The MicroCal 1 Plus thermocouple simulator and thermometer helps ensure that the frequent checking of thermometer accuracies is a routine operation. The calibrator is designed to simulate a chosen temperature to test thermocouple type K, J, T, R, N, S ...

See the other products
Labfacility Limited
omnidirectional antenna
omnidirectional antenna
433 MHz Lora

Frequency: 430 Hz - 450 Hz
Gain: 6.5 dB

... Best Solution for Reliable Wireless Communication The 433 MHz UHF/RF/LoRa Omni Directional Gain Antenna is designed to provide superior performance in your wireless communication projects. This antenna operates in the 433 MHz frequency band and supports ...

See the other products
ROLTEK TECHNOLOGY
pressure calibrator
pressure calibrator

The calibrator KAL 84 is used for calibrating pressure sensors. It represents a combination of a pressure generator (hand pump) and a pressure meter with digital display. The instrument provides a simple means for testing and calibrating both pressure ...

neutron detector
neutron detector
R7771

... Intended for neutron counting applications with multiple detectors Dedicated to Nuclear Safeguards and nuclear material process monitoring in its life cycle Timestamp resolution of 10 ns Pulse pair resolution of 10 ns plus pulse width Minimum pulse ...

See the other products
CAEN Spa
portable insulation resistance meter
portable insulation resistance meter
IT 100

... Multifunctional measuring device for numerous applications in electrical installations and the electrical industry Measuring functions low-impedance resistance of protective conductor and equipotential bonding conductor connections (testing current: ...

See the other products
Benning
current test kit
current test kit

... VLF means ‘Very Low Frequency’ is used in AC hipot test for power cables, transformers, switchgear and other electrical apparatus. A VLF hipot is just an AC output tester but with an output frequency of 0.1 Hz or lower rather than 50/60Hz. Although ...

See the other products
Sansion Power Electric
voltage detector
voltage detector

Transient absence per phase and per group; Permanent absence per phase and per group; Reclosing and Shutdown (per phase); Current surge; Neutral overcurrent; Inverted sensor; Flow inversion; Current (RMS per phase); Module and angle phase A, B and C; ...

See the other products
Tecsys do Brasil Industrial Ltda
insulation resistance tester
insulation resistance tester
S600

S600 is a multi-functional tester which combines the functions of fiber tester and copper tester. With 1 machine, the operators can solve all the telecom testings tasks. S600 supports ADSL/VDSL/VDSL2 test( 35b VDSL optional), DMM function, TDR-4KM (8km,16km ...

See the other products
Shandong Senter Electronic Co., Ltd
voltage measuring instrument
voltage measuring instrument
SparkScan series

... The SparkScan series is a measurement system for the visualization of ignition voltages. Three different versions are available: SparkScan1 is suitable for all types of “open” ignition leads. SparkScan2 and 3 were developed particularly for ...

temperature calibrator
temperature calibrator
AHT530 series

Temperature: -20 °C - 55 °C

... AHT530 is a battery-powered, hand-held unit designed to configure, calibrate and troubleshoot to smart transmitter either remotely or nearby. AHT530 allows you to establish communication with a Hart field instrument over the existing 4-20 mA DC lines, ...

temperature calibrator
temperature calibrator
TCA820

Temperature: -200 °C - 1,820 °C
Pressure: 0 psi - 10,000 psi
Voltage: 0 V - 60 V

... •Designed for on-field use, it offers ail advantages of a documenting calibrator. •Measures and generates mV, T/C, Ohms and RTD signais, besides measuring mA. •Output operation simultaneous with mA input. •Internai regulated 24VDC power supply for 2-wire ...

See the other products
Indumart
wireless magnetic sensor
wireless magnetic sensor
Blue PUCK MAG

Equipped with Bluetooth Low Energy technology, the BLUE PUCK MAG sensor is ultra compact. 100% autonomous and robust, this sensor makes it possible to secure the transport of goods by detecting the opening and closing of truck doors and valves. It also ...

galvanic signal isolator
galvanic signal isolator
TSU400 series

The galvanically isolated safety barriers TSU400 are valid alternative to passive barriers because they don’t need a high integrity I.S. ground, being the isolation between the safe area and the hazardous area guaranteed by a transformer. TSU400 series ...

epoxy resin embedded pole
epoxy resin embedded pole
8GDEP.2*2.***.**

Voltage: 12 kV
Current: 1,600, 1,250, 630 A

... Product NO.: 8GDEP.2*2.***.** Rated voltage:12kV Rated current: 630A;1250A ; 1600A Rated short circuit breaking current:25kA ; 31.5kA Including contact arm sleeve:Yes ; No ...

See the other products
Xiamen GOODEP
leak calibrator
leak calibrator
CM20

Pressure: 10 bar
Voltage: 24 V

... The CM20 flow meter allows the monitoring of other flowmeters or leak master. Simply insert the control element between the regulated pressure source and the CM20 flowmeter and adjusted the pressure value to read the actual value of the leak. ...

current probe
current probe
LW6 series

... - AlGaInN-based UV Sensor - Housing Type - Window : Quartz Glass - Case Material : SUS 316-L(1.4404) - Water Resistance : 10 bar - Cable Length : 5 m (Standard) - - Power Supply - DC - Output - DC current : - Operating ...

See the other products
GenUV
loop-powered signal isolator
loop-powered signal isolator
ATIs 1

... The ATIs 1 extra slim 7.2mm Loop Isolator solves common key problems that may occur on the measure loops and reduces the rejection of the disturbances induced on the cables. This equipment is developed to be installed in ATEX/IECEx area 2. TECHNICAL ...

See the other products
ARDETEM SFERE
fiber optic current sensor
fiber optic current sensor
OLP225

Primary current: 5 A - 30,000 A

... The MICATU Medium Voltage & Current Sensor System utilizes a 100% “all-optical” measurement platform for unparalleled accuracy and precision of both voltage and current across multiple voltage classes. Installation time for a typical three-phase system ...

See the other products
MICATU, Inc.
PCB integrated circuit current sensor
PCB integrated circuit current sensor
MLX91207

The MLX91207 is a fully customer programmable monolithic current sensor IC in standard SO-8 package. The Hall sensor provides a high speed analog output signal proportional to the external applied flux density and additional thermometer output. The MLX91207 ...

See the other products
Melexis
Hipot tester
Hipot tester
7631

... Features ■ 8 Channels ■ Hi pot ACW 5KV/30mA ■ Hi pot DCW 6KV/10mA ■ Insulation 1KV/12000MΩ ■ Arcing detection ■ True RMS measurement circuit ■ Measuring Time (0.1 ~ 999s) ■ Adjustable ramp time (0.1 ~ 10s) ■ Safety Switch(INTER LOCK) ...

See the other products
Microtest Corporation
Hall effect integrated circuit current sensor
Hall effect integrated circuit current sensor
ACS712 series

Primary current: 10, 20, 30 A

The Allegro® ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, ...

See the other products
ALLEGRO MICROSYSTEMS
fault location system
fault location system

Do you need to reduce the cost of operating your distribution network? Do you experience a fault in a hard-to-reach area, for instance during a storm? However, the distribution system is in good condition, so installing completely new switching elements ...

See the other products
IVEP, a.s.
exhibit your products

& reach your clients in one place, all year round

Exhibit with us