Temperature: 33 °C - 300 °C
... The 3000 series thermometer calibrators are small and lightweight heat sources, ideal for checking the accuracy of digital thermometers and temperature probes. The thermometer calibrators have a temperature range of 33 to 300°C with a resolution of 0.1°C. These ...
Designed to slip easily into the bed of a pick-up truck, Seraphin® Slip-On Volumetric Calibration Unit can speed the job of calibrating multiple fuel dispensing units, while at the same time, enhancing safety. The unit consists of three 5 gallon or 20 ...
Seraphin Test Measures
... WHAT DOES IT DO? The UCT (Ultrasonic Concrete Tester) ultrasonic testing equipment is a portable system for non-destructive testing of the quality and characteristics of materials to evaluate their homogeneity, fractures, voids and CLS resistance. STRENGTHS Compact, ...
... Over the last years MMCX has developed as the standard connectivity solution for repeatable measurements with highest signal fidelity. Different models are available up to >1GHz bandwidth and ±42V input voltage making the MMCX probe series the modern ...
PMK
... FUNCTIONS ▪Setting standard sound level at 94 dB and 114 dB. ▪According Standard: ANSI S1.4-1984 and IEC 942 1988 Class 2. ▪½¡¨ microphone adapters provided. ▪Low battery indicator. ...
Tenmars Electronics
Primary current: 0 A - 3,500 A
GF2018 is the newest version of the wireless primary current sensor. Rational design and adopts 433M transmit technology for data transfer. It makes the current data recording more stable and accuracy. The primary current sensor using the PC and ABS material, ...
BEIJING GFUVE ELECTRONICS CO.,LTD.
... Electrical circuit not more than Low voltage 600V, Insulation resistance of Electric installation, voltage measurement(DC/AC auto detect), Resistance measurement, and Continuity check ■Automatically-held readings after measuring MΩ The LED ...
Sanwa Electric Instrument
PROLITE-11 Visual Fault Locator is equipped with a 650-nm high power visible laser diode, can be operated in CW (continuous) or MOD (1 Hz modulation) mode. There are two LED indicators RED and GREEN: The RED one shows the operating mode of the Laser Diode ...
PROMAX ELECTRONICA
... The Multi-CE5 features a microprocessor controlled user interface and a capacitive 7" touch screen unit. For ease of use, the D.U.T output is placed on the front of the generator. In its basic configuration, the Multi-CE5 includes an Electrical Fast ...
Hilo-Test GmbH
The Triplett Plug-Bug™ 2 is an accurate GFCI Receptacle Tester. With its simple just plug into outlet test you can easily identify common wiring faults in outlets. The easy to read lights indicate precise test results to help determine GFCI faults. Designed ...
Triplett
The Compact-506 is a galvanometer-based optical scanning system, intended for applications where small package size, low cost, and light-weight are paramount concerns. Although the Compact-506 is very small, it is built upon our VRAD-506 actuator platform, ...
Pangolin Laser Systems
... ATTO D4 70A RS485 230-240V TRANSDUCER / ENERGY ANALYZER Cod. PFA7431-02 Single - three phase transducer/analyzer. Suitable with external CT 70A cod. PFAE000-00 (1 already supplied and included in the packaging). THD on voltage and current measurements, ...
... G00-B15 Only use the G00-B15 with the EM-SCANPHONE of LUXONDES: https://www.directindustry.com/prod/luxondes/product-222681-2274832.html Near field magnetic sensor (loop) To be used with spectrum analyzer Applications The G00-B15 sensor ...
LUXONDES
... The independently operating Tesla Meter / Gauss Meter Type KOSHAVA analog for connection to a digital multimeter, oscilloscope, data logger or data acquisition card is an inexpensive alternative to the handheld and USB Tesla meter / Gauss meters. The ...
WUNTRONIC GmbH
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) , UL 746A, IEC829, DIN695 and VDE0471. The Glow wire tester ZRS-3H/ZRS-3HS ...
... The new Amik series is a three-phase multifunction digital panel meter product line. It measures important electrical parameters in 3 phase 4 wire and 3 phase 3 wire networks and replaces the multiple analog panel meters. It measures electrical parameters ...
Simpson
... Safely measure secondary ignition with an USB oscilloscope. The voltages on the secondary side of an ignition system are too high to be measured directly. To safely measure these signals, the Ignition Pickup TP-IP250 can be used. The Ignition Pickup ...
TiePie engineering
The 6CP line is a complete test system in a mobile package, simple to set-up and operate, lightweight and ruggedly constructed. The 6CP line consists of a combination control and regulator enclosure and separate high voltage section.
PHENIX TECHNOLOGIES INC
... PSL's Industrial Power Corruptor generates bad quality power, reliably and repeatedly. Use an IPC to test sensitive systems, making sure your design will work when it is installed. These are the best instruments for complying with SEMI F47, SEMI E6, ...
... Suitable for aircraft electrical systems up to 400 Hz Dual voltage range: 12-50V and 51-1000V Overvoltage category CAT.IV 1000V Visual and sound indication Integral torch light Power switch and automatic timed switch-off Battery indicator Ingress ...
MTP Instruments Inc
Primary current: 50 A - 600 A
... Model : CHK_BR5S2 Nominal Current (RMS) :50/100/200/300/400/600A Vout/Iout @Ipn :2.500±2.0V Measuring Range :0～±600A Supply Voltage DC :+5V Accuracy (%) @Ipn +25°C :< ±1.0% Mounting (mm) :10.5*20.5 ...
Cheemi Technology Co., Ltd
... Digital Unipolar Hall IC Features and Benefits △ High sensitivity digital output △ Stable over the entire temperature range △ Wide operating voltage range: 4.5V ~ 24V △ Strong resistance to mechanical stress △ Reverse power supply protection △ ...
Nanjing AH Electronic Science and Technology Co., Ltd.
... The WK 260 MU Teste Device is ideal for the test of cables, harnesses and electric components for Automobiles, computer and electronic devices. It can be operated completely without a computer and thus seamlessly integrated into the production process. With ...
WEETECH GmbH
The PVC-500Portable Vibration Calibrator is an ideal tool for checking accelerometers, velocity transducers, and proximity probes over a wide operating frequency and amplitude range. The unit is a compact, and completely self-contained vibration reference ...
Vibsens
The use of sound calibrators dates back to the days when it was easier to design a stable sound calibrator than a stable Sound Level Meter. Today, sound measuring instruments, in general, are as stable as the sound calibrators. However, measuring microphones ...