... K2066i Universal Relay Test Set Item No.: 201096 Powerful 6-phase relay test set and commissioning tool, convenient for field test; 6x35A & 7x310V high accuracy analog channels output; 9.7” True color TFT LCD, touch screen and keyboard operating, ...
Kingsine Electric Automation Co., Ltd.
... Skid Resistance and Friction Tester is used for the measurement of surface friction properties. Product Code - Product Description PRS-ASR0930/E - Skid Resistance and Friction Tester (Skid Tester), EN 1097-8 PRS-ASR0930/A - Skid Resistance and ...
Frequency: 865 MHz - 928 MHz
Gain: 9 dB
... Circular Polarization 9dBi RFID Antenna CL7205A Original appearance designed high-end UHF RFID Antenna, high gain but low standing-wave ratio brings best performance. Engineering plastic housing, IP66 rugged. Widely used with our CL7206C/B fixed reader ...
Shenzhen Hopeland Technologies Co.,Ltd
Frequency: 410 MHz - 470 MHz
The Atta antenna operates on the LTE 410MHz and LTE 450MHz bands. Atta is a flexible printed circuit (FPC) antenna with cable that enables direct connection to the host PCB with an I-PEX coax connector. The host PCB ground is not used, therefore the antenna ...
Temperature: 400 °C
... Calibration Equipment of Temperature and Pressure Reasonable structure Stable performance Easy maintenance Energy-efficiency Product details Calibration equipment of temperature and pressure instrument is used to calibrate the temperature and ...
... The Hydraulic Calibration System is specially designed for the calibration of load cells with higher capacity. The Calibration for Load Cell can calibrate the load cell within ±1%. The load frame is with four columns. The columns are fastened by nuts. ...
Jinan Testing Equipment
... The ID921B Hazardous Area Personnel Test Meter is designed for use within Zones 21 and 22 Hazardous areas to screen personnel for the effectiveness of their wrist straps and conductive footwear. The instrument has an Equipment Protection Level of Db ...
... ELECTROSTATIC DETECTOR Handling, portable, digital electrostatic field mater with a rotating chopper Detects and accurately measures electrostatic fields Automatic fields to voltage conversation (V/m - V) according to the selected distance Very stable ...
... 2-wire 4-20 mA isolator 6580 • Very slim, 9.5 mm only • 2-wire output 4..20 mA • Inputs 0..20 mA, 4..20 mA or 0..10 V • Galvanic isolation 1000 V • Power supply 10..34 VDC • Voltage drop in input loop 1V • Output load 700 ohm (with 24 V) • Accuracy ...
... At Ether NDE we can offer two types of Conductivity Probes that fit our SigmaCheck Conductivity Meter. We can now offer our standard Conductivity Probe and our 8mm version. APPLICATION: For use with the SigmaCheck-2 Eddy Current Conductivity Meter, ...
Ether NDE
Pressure: -1 bar - 250 bar
... Modular built, automatic Pressure Calibrator ...MEASURE PRESSURE, VERY SIMPLE... TM40_web - Our modular built Pressure-Calibrator TM40 is unique in its conception. The device is built completely modular. 4 slide-in slots are freely configurable Those ...
Temperature: 0 °C - 50 °C
Pressure: 1.72 bar
... The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic multi-point gas calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span ...
Environics
... The BlackBox G5DFR is a fully featured digital fault recorder embedded with PQZIP technology. The G5DFR is a distributed multi-functional data acquisition device that continuously records all waveform signals at sampling rate of 1,024 samples per cycle. PQZIP ...
In combination with a PC, laptop or tablet PC the digital calibration and measurement unit (DCMU box) is an ideal solution for testing, documenting and calibrating sensors, especially incremental rotary encoders. The DCMU box has a modular structure combining ...
Temperature: 5 °C - 375 °C
Voltage: 220, 110 V
... Temperature Calibrator, Tradinco Traqc-3 FM Are you looking for a precision field dry-block temperature calibrator? The Traqc-3 is extremely suitable for use in field applications. This light weight instrument is easy to use and has a rapid heating- ...
Tradinco
... High-Frequency/High-Current Meter The high-frequency/high-current meter LCA-101 does not use a metal core but a clamp, eliminating the problem of iron loss and saturation distorting linearity affecting results. There are two sensors, clamp and flexible, ...
CEW
... Gassonic 1701 Portable Test and Calibration Unit The Gassonic 1701 is a portable test and calibration unit used to verify the operation and calibrate certain Gassonic ultrasonic gas leak detectors. Although the Gassonic detectors do not require regular ...
... Universal Surface Tester with high local resolution for deformation, damping, topograpy, microfriction and many more Universal Surface Solution within One System UST® is designed to deliver quantitative mechanical characterization within one open ...
Primary current: 100 A - 100,000 A
... Measuring range: - 100 A - 200 kA Current: - AC / DC Sensitivity: - 150 mV / kA at 50 Hz Diameter: 170 mm (6.7") inner & 200 mm (7.9") outer Cable length: - 2 m (78.7") ...
Matuschek Meßtechnik GmbH
... The BREAK-SAFE® is a jumper clamp that functions like a portable switch. It is designed to operate on overhead distribution lines in conjunction with a mechanical jumper. The BREAK-SAFE® has three operating functions: LOAD BREAK LOAD PICKUP CONTINUOUS ...
Utility Solutions Inc
... Equipment for calibration of MAV testers With the use of the MAV calibration equipment you are able to calibrate and adjust MAV devices on your own. This way, downtimes are reduced and costs minimized long-term wise. For a successful calibration ...
ndb Technologie presents portable AE-150. It locates partial discharge within power transformers while remaining online. In transmission and distribution of electrical power, transformers are mission-critical and high-priced assets. Losing a transformer ...
ndb Technologies
Primary current: 6 A - 50 A
This is a device which controls the powerful flow of current. It uses closed loop fluxgate system.It gives best result at +105℃ and -40℃. Consist of Multi-Busbar,F02 and F03 with source access. It has four main models with primary nominal current range ...
Tamura Corporation
... The Gas Flow Calibrator is a piston-prover-based test stand utilizing sonic nozzles to provide metrology for all gas metering technologies. This system: calibrates flow meters at pressures ranging from atmospheric to 150 psig tests flow meters both at ...
The compact and portable Faultfinder VIP system, combined with a Laptop running TestVue software, provides a way to rapidly identify failures by troubleshooting a PCB or CCA. It uses impedance signatures (also known as VI testing) measured from a known ...
Diagnosys
... The PD monitoring system PD GUARD/UHF is especially developed for continuous partial discharge monitoring of high voltage equipment, like GIS and Cable Systems with UHF Technology. Applications For use on GIS or other UHF applications (e.g. transformers) ...
Doble Lemke
... The CVM is a high-precision 1 channel voltage measurement module and the base module for various expansion boards. Communication and power supply via USB. Furthermore, the PC ground is galvanically isolated from the analog ground. Voltages in the range ...
CGS Computer Gesteuerte Systeme GmbH
... The Model AB calibrator is a Wheatstone bridge and generates a true change of resistance in one arms of the bridge. It simulates the actual behavior of a strain gage in negative strain calibrator based on the Wheatstone bridge principle requires stable ...
Advance Instrument Inc.
SG6 is an intelligent signal calibrator with high-precision measurement calibration and signal generator in one . It can simultaneously output / measure multiple electrical signals, and supports a variety of communication modes, such as RS485 bus, HART, ...
Zoglab Microsystem
Frequency: 2.4 GHz - 5.8 GHz
Gain: 3 dB
... • Up to 90� Flexibility • Rubber Duck Type • Yagi Directional Log Periodic Type • Single-band, Dual-band & Tri-band Frequency • LTE Protocols NAN-E is a NIC Focus Series and most preferred for new designs Application Focus Meters Routers Gateways Cellular ...
NIC Components
... The TIP One is purposely designed for shallow induced polarisation or Resistivity sounding investigations. The TIP One injects a regulated current or regulated voltage into the ground via a simple 12V battery. This transmitter is generally used together ...
Iris Instruments
... Suitable for AC and DC measurements! Compact dimensions, easy to mount Terminals with cage clamp technology True RMS (EM800 series) 48 hours service (EXW) Measuring and auxiliary voltage up to 440V ...
... Delphi's patent-pending Buzz Tool, also known as the Electronic Injector Test Kit, combines multiple tools into one to test the electrical integrity of all-makes solenoid Common Rail injectors. The Delphi Difference - Measures resistance and inductance ...
Primary current: 5,000 A
... Magnelab RCT-1800 Series flexible RopeCT current sensor measures AC current up to 5,000 Amps. The flexible coil opens at the connector junction and can be installed on an existing cable or buss-bar in a matter of seconds. Note: The integrator requires ...
Manutech Europe
Primary current: 500, 1,000, 2,500, 5,000 A
... Top Features of the Magnelab RCT-5A Three Phase Rogowski Coil Set The RCS-5A is an excellent alternative to standard 5A current transformers. The RCS-5A from Magnelab offers the ability to choose from several different amperage input ratings. This ...
MAGNELAB
The AcuRev 2100 Series is the next generation, multi-circuit submeter designed to measure multiple circuits using SnapOn CT technology for quick and easy installations in high-density, multi-point applications. Ideal for multi-tenant billing applications, ...
Accuenergy Canada Inc.
... Laser Powered Probe – RadiSense® 10 E-Field sensor for radiated immunity EMC testing. Due to a new patented technology, dramatically improving the isotropic behaviour, the RadiSense 10 is the most accurate electrical field (E-Field) probe in the world! ...
Raditeq B.V.
In this textile air permeability measurement device of Frazils system, the test specimen is mounted at the sample stand. The pump is so adjusted that the inclined type air pressure gauge may show the pressure of 1.27 cm at the water column by use of the ...
... Digital electronic calibrator for fast and accurate calibration of extensometers. Model CES - Standard Extensometer CalibratorOur model CES digital electronic calibrator is a precise instrument designed for ease of use and rugged, long-lasting durability. ...
Reliant Technology, LLC
... The TDR9000 Circuit Breaker Test System is a state-of-the-art instrument designed to test all types of circuit breakers. It permits testing up to eight breaks per phase, for a total of 24 main contacts simultaneously. The instrument's high-speed data ...
Doble Engineering