Other electrical measurement equipment

905 companies | 4,889 products
electromagnetic field probe
electromagnetic field probe
EMS-150

... Low Frequency Electromagnetic Field Analysis System EMS-150 Description The problem of electromagnetic radiation and health has been paid attention to by human beings gradually with the electromagnetic wave used in human daily life more and more widely. ...

See the other products
Coliy Technology GmbH
LAN network tester
LAN network tester
EazyLAN

... The EazyLAN is suitable for fast and easy testing of RJ45 UTP & STP cables. The EazyLAN is equipped with a manual and auto test mode and gives the user a good/fault indication at the end of a test. If the cable has failed the EazyLAN will indicate via ...

See the other products
Mors Smitt BV
power measuring module
power measuring module
VE-ETH-128

... Part of an expanding family of gateway devices, the VE-ETH-128 Series is specifically designed for compatibility with the Voltek cloud-based software platform. This series exemplifies innovation in connectivity and data integration. The VE-ETH-128 Series ...

signal isolator
signal isolator
SISO3

SISO3 is a signal isolator that electrically isolates the intrinsically safe circuit from non-intrinsically safe circuit such as a data acquisition system, e.g. AMSY-5 or AMSY-6. A SISO3 is required if an ISAS3 is installed in an hazardous area according ...

frequency calibrator
frequency calibrator
VC21 (D)

... Vibration Calibrators Application • Rapid and easy calibration of vibration transducers for acceleration, velocity and displacement • Calibration and fault detection of vibration measuring systems • Calibration of low frequency equipment for whole-body ...

See the other products
Metra Mess- und Frequenztechnik in Radebeul e.K.
vibration calibrator
vibration calibrator
MTN/VC20

Portable vibration calibrator allowing the periodic field checking of accelerometer sensitivity.

Hall effect current sensor
Hall effect current sensor
C-DCZCT-20CDHL Series

Primary current: 1 mA - 200 mA

... •Small DC current' s measurements: DC1 mA~200 mA •High accuracy: ±1 %FS±20 mV •Least influence of magnetization: Less than DC1 mA in current level •Convenient Single Supply (+5 V) •Reference voltage (Vref) terminal is equipped. •For the detection of earth ...

power measurement system
power measurement system
Garde series

The Techna-Guard product line is designed to protect and optimize machinery and processes driven by three-phase AC motors. Techna-Guard protects machinery by monitoring power consumption of the motor while providing valuable information on load and performance. ...

sound level calibrator
sound level calibrator
1000 Hz, 94 dB | 521, 511E

... Specifications and Accessories 515 Sound Level Calibrator * 1000 Hz +/- 1% * Distortion Less than 2% THD * 0 dB Reference Point for: A, B, C, D Weighting * 94 dBSPL = 1 Pa * Accuracy - Meets IEC60942:2003 Class 1 * +/-0.3 dB @ ...

magnetic sensor with switching function
magnetic sensor with switching function
HGDE / HGDF series

High precision, compact and low-profile product based on magnetic sensing devices technologies.

See the other products
ALPS Electric
AC voltage measuring instrument
AC voltage measuring instrument
DAV-300

... Direct Ammeter and Voltmeter with 2×3 Digit LED Display Features Ammeter and Voltmeter (2in1) devices are designed to monitor the voltage value of the system while simultaneously monitoring the current value drawn by the load or loads in the system. - ...

high-voltage probe
high-voltage probe
VMP series

... HV Probes for Oscilloscopes, Digital Meters & Recorders The Ross VMP high voltage probe with it's OSHA safety complying HV insulated handle accurately measures high voltage with as low as 0.1% DC and 0.5% AC accuracy, wideband, DC to 1MHz up to as high ...

See the other products
Ross Engineering
power measuring device
power measuring device

... The advantages of our didactic system are: Determination of essential electrical parameters as active, apparent and reactive power (of e.g. light fittings) Measurements of the network load caused by harmonics (3-phase presentation) Measurements of ...

phase detector
phase detector
max. 480 V, 50 - 400 Hz | 208 series

... The Model 208A & 208D Line Voltage & Phase Sequence Detectors allows quick and easy determination of phase sequence (either ABC or CBA). Available in 50/60 Hz and 400 Hz versions, this unit can also show that all phases are present, or if one or more ...

See the other products
Time Mark
high-current spring contact probe
high-current spring contact probe
BC50-8

Current: 50 A

A Butt Contact is a high-current probe that can energized electronic devices by simply pressing the coil spring to have contact with the inspection module in the manufacturing of battery, automobile parts, power semi-conductor modules and other electronic ...

See the other products
GLOBETECH INC
sound level calibrator
sound level calibrator
CB004

... Portable, user friendly calibrator, ideal for checking sound level meters and dosimeters on the measurement site, or in the laboratory. It is designed especially to check class 2 dosimeters and sound level meters. Represents a cost effective yet accurate ...

magnetometer
magnetometer
THM1176

... Magnetic field meter for fields from 0 Hz (DC) to 1 kHz. Non-directional measurement with isotropic (3 axis) Hall probe Heavy duty (3 Tesla) and highly sensitive (8 mT) field probes Small dimension sensors and USB interface for precision measurements ...

test probe
test probe
Sirius 600

... Our Photonic Test Prober (PTP) supports fast, simultaneous PIC optical and electrical testing. Sirius is made for functional PIC testing. Photo below is a courtesy of PI. Fast optical alignment with fiber arrays Easy to configure test rack to tailor ...

transducer
transducer
PC42 series

... HIFU Transducer for cosmetic procedures and medical use Main features Outer Diameter : Φ22 Frequency : 4 / 7 / 10 MHz Outer Diameter : Φ44 Frequency : 2.0 / 3.0 MHz ...

See the other products
IS TECHNOLOGIES CO., LTD.
electromagnetic field measuring device
electromagnetic field measuring device
MULTIFIELD

... The MultiField electrosmog meter is a device for quick measurements in a same time of 3 frequency meters: - Magnetic field low frequency (50 to 60Hz) with sensor triple axis X,Y,Z, in mGauss or µTesla with a range of 0,2 to 2000mG. - Electric field ...

analog current sensor
analog current sensor
PR55-5A

Primary current: 0 A - 0.02 A

... Highlights • - Industrial Grade 1-Channel 4-20mA Current Receiver • - Input Range 0-20mA with 15-bit Resolution • - Auto ADC Transmission on Analog Voltage Change Detection • - 10% Analog Voltage Change Detection • - 2 Mile Line-of-Sight Range with ...

open-loop current sensor
open-loop current sensor
SC series

... Connect directly to any XR440 or XR5-SE Data Logger. Also connects directly to any recorder or data acquisition system that has a 0-5vdc input. No external power required. Accurate at very low input current levels (below 1% of full scale) Self powered Split ...

See the other products
Pace Scientific
signal isolator
signal isolator
24 VDC, 4 - 20 mA | HIT, HIX

Isolates the analog loop, and lets the HART digital signal pass through unaffected

temperature calibrator
temperature calibrator
TC621

Temperature: -250 °C - 2,310 °C
Voltage: -10 mV - 100 mV

... User friendly and robust the Wahl® TC Series Pocket Calibrators have been designed to simplify temperature transmitters and probes maintenance and commissioning. They measure and simulate thermocouples or RTD's. Features: High accuracy: 0.02% of ...

See the other products
Palmer Wahl Instruments, Inc.
temperature calibrator
temperature calibrator
EJB 9971

Temperature: 0 °C - 50 °C
Voltage: -10 mV - 100 mV

... EJB 9971 MULTIFUNCTIONAL THERMOCOUPLE PROCESS CALIBRATOR The EJB 9971 Thermocouple Calibrator measures or simulate 8 types thermocouples (J,K,T,E,R,S,B,N) or millivolt. High accuracy 0,3°C and 0,025% for mV delivers outstanding performance, durability ...

See the other products
BERCU
exhibit your products

& reach your clients in one place, all year round

Exhibit with us