Hydraulic system for tear adherence tests on high resistance coating materials The Pull-Off is a direct method of proof consists of a semi-destructive extraction, used to estimate the tensile strength of materials. Recovery linked ...
Novatest
The new probe Inclis DH-30, designed and manufactured by Solgeo, allows to realize a 3D inclinometer survey of holes (e.g. perforations) having any direction and inclination in space. The probe contains a magnetometric triad and an ...
Novatest
The U.S.A. universal calibration anvil E74 is an indispensable tool for those who perform hammer test surveys: during the execution of these tests it is necessary to check the calibration of the instrument. The U.S.A. anvil E74 is supplied ...
Novatest
The SpeedMaster™ is manufactured by Go4B, and is a speed switch calibration and testing device with pulse pilot. It is the only device that accurately tests the calibration of a speed switch, and permits testing of the 10% alarm and 20% ...
The ADB Sensor Tester is a hand held unit perfectly suited for field testing of 4B adjustable depth bearing (ADB) temperature sensors, as it is equipped with an integrated heating block, designed for direct insertion of sensors. Once ...
Primary current: 0 A - 10 A
CA AC Current Transducer 0.2 Class ● 1P2W / 3P3W ● TRMS option ● Precision measurement even for distorted waveform ● Self powered or Loop powered models available ● Output signal programmable by dip-switch ● Low output ripple ● ...
ADTEK Electronics Co., Ltd
CPF/CPA Power Factor / Phase Angle Transducer 0.5 Class - Measuring Power Factor or Phase Angle - 1P2W, 3P3W, 3P4W Balanced or Unbalanced systems - Precision measurement even for distorted wave - Output range programmable by dip-switch - ...
ADTEK Electronics Co., Ltd
Primary current: 0 A - 300 A
2A Transducer Current Transducer FEATURES: ● Direct 300A max measured for AC or DC ● 1P2W / 3P3W / 3P4W ● Output signal 4~20mA, 0~10V ● 4~20mA (Loop Powered DC 24V) ● DC Powered (or Loop) ● Small size, easy installation
ADTEK Electronics Co., Ltd
Two new AC measurement cards are available for the OrionMX: • The AC Meter Expansion Card (M1) - Provides a full set of accurate AC measurements from Bus 1. It also provides Phase A, B and C voltages from a second bus for source transfer ...
The PowerPlex II (PPX II) is a new Automation Transducer built in the same package as the original PowerPlex, or with digital I/O added, in the M571 case. It is an Ethernet transducer with fast, 1-cycle updates that can be used in SCADA ...
The Bitronics 70 Series Disturbance Recorders provide a scalable, low-cost distributed disturbance recording solution that meets all three PRC-002 requirements in a single unit that can be installed without an outage. They support IEC ...
Calibration Target Micro V1 Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, ...
The stage micrometer from Opto in the form of a microscope slide is required for the calibration of microscopes. - Glass scale 50 mm in 0.1 mm and 0.01 mm - Calibration of measurement software The stage micrometer is also available ...
Opto's Particle Test Target allows the calibration of measurement functions in microscopes through objects in different forms and sizes or of resolution of an optical system measured in Line Pairs per mm. It is used in the field of Residual ...
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
The 4011 is a sound calibrator conforming to IEC 60942 class 1 and ANSI S1.40 for the calibration and the verification of microphones and sound level meters. It generates a sound pressure level of 114 dB at a frequency of 1000 Hz ...
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
Noise level: 114 dB
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
The 4010 is a sound calibrator conforming to IEC 60942 class 1 and ANSI S1.40 for the calibration and the verification of microphones and sound level meters. The combination of two sound pressure levels and two frequencies allow ...
MV Voltage detector 1 - 69 kV Standards IEC 61243-1 VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C. CE: Compliance with European directives. Use These voltage detectors are designed for “proving dead”, ...
PENTA
Individual voltage alarm with headlamp Standards Complying with EC European Directives EN 61000-6-2 / EN 61000-6-4 Use ALADIN is a personal electric field detector combined with a professional headlamp. It provides the wearer ...
PENTA
Phase tester for LV network Standards 1000V CAT IV - IP65 Use UNITAG is a unipolar detector designed to test the presence of phase on insulated or bare LV conductors. The level of detection is indicated by a LED bargraph and ...
PENTA
C406H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2 and ...
Labthink Instruments Co., Ltd.
C610H Auto Tensile Tester is professionally applicable to measurement of tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force, pulling force and low speed unwrapping force as well as other properties ...
Labthink Instruments Co., Ltd.
C660B Leak and Seal Strength Tester is professionally designed for the leakage tests of packages for food, drugs, medical instruments, household chemical products, cars, electronic components, stationeries and other industrial products. ...
Labthink Instruments Co., Ltd.
The ATS-X is the electronic weld integrity inspection tool for plastic and metalloplastic tubing, and veriies that there is no leakage under the effect of a crushing force applied to the test sample. Like ATS, ATS-X is necessary for ...
Pressure: 0 bar - 6 bar
The calibration test, associated with a tube weld tester, allow to mesure the internal pressure of a tube subjected to the application of a crushing pressure exerted by the compressiometer Why use a calibration kit ? Each tube is ...
Automatic Resistivity Tester for Battery Separator Film Test Automatic Resistivity Tester GB-LST-212 This instrument is designed according to GB/T 1410 "Test Method for Volume Resistivity and Surface Resistivity of Solid Insulating ...
The Raptor system consists of a main ‘master’ unit and a number of optional units that enable the execution of virtually any commissioning or routine testing jobs on the primary equipment of medium and high voltage electricity installations. Massive ...
EUROSMC
The TriRaptor is the only really portable three-phase injector in the market providing stabilized current in the range of 3000 A and beyond. It has been designed with the same ergonomics and performance characteristics found in the popular ...
EUROSMC
The LET-400-RDC is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of ...
EUROSMC
Temperature controlled battery short circuit tester This equipment is designed based on the requirements of various battery short-circuit test standards. According to the standard requirements, the short-circuit device must meet ...
The tester is designed for synchronous balancing of multiple string groups, with how many string groups are connected to work together to improve balancing efficiency, ensure that each string group voltage is consistent, and achieve optimal ...
It is suitable for the stickiness test of various tapes, adhesives, medical tapes, sealing tapes, labels, plasters and other products. Hang the test plate with the sample attached vertically on the test frame, hang the weight of the specified ...
The Test lead for temperature probe of Temperature Technology Ltd is a 1m, 2m, 3m long device which offers various specifications which include a retractable leads which are curly in form and works with probes. It ican be of 3 types ...
A gas preparation device for calibration of a flow ratio mixing system for the purpose of using calibration of an atmospheric sulfur dioxide analyzer, a nitrogen oxide analyzer, and a carbon monoxide analyzer. A zero gas generator is ...
Primary current: 0 A - 32 A
BRCM01C can be seen as either a residual direct current monitoring device (RDC-MD) compliant to IEC 62955 or an AC/DC RCM compliant to IEC 60947-2-(M) and IEC 62955 because the device has separate Pins for solely DC trip output and AC&DC ...
Shanghai Bituo Electric Co., Ltd.
Primary current: 0.01 A
The BRCS01 residual current sensor is a high-sensitivity AC and/or DC residual current sensor (also named a leakage current sensor) with digital output of fault detection and integrated self-testing functions. The sensor can be used ...
Shanghai Bituo Electric Co., Ltd.
Primary current: 0 A - 32 A
The BRCS03 residual current sensor is an AC/DC residual current sensor with two separate fault signal outputs – one Pin for Type A 30 mA & DC 6 mA leakage current detection and the other Pin for solely DC 6 mA leakage current detection. ...
Shanghai Bituo Electric Co., Ltd.
Frequency: 430 Hz - 450 Hz
Gain: 6.5 dB
Best Solution for Reliable Wireless Communication The 433 MHz UHF/RF/LoRa Omni Directional Gain Antenna is designed to provide superior performance in your wireless communication projects. This antenna operates in the 433 MHz frequency ...
Frequency: 698 MHz - 960 MHz
Gain: 3 dB - 14 dB
Best Solution for Reliable Cellular Communication Gain LTE/3G and GSM Antenna is a high performance antenna type that provides strong signal reception and transmission. Designed for various wireless communication devices and systems, ...
Primary current: 100 A
Ø22 mm toroid for earth leakage relay The toroids for the earth leakage relays are used to measure alternating leakage currents (AC, A, F type components). Thanks to its advanced technology and the quality of the components used, ...
ZELEC
Primary current: 125 A
Ø24 mm 32 x 10 mm toroid for earth leakage relay The toroids for the earth leakage relays are used to measure alternating leakage currents (AC, A, F type components). Thanks to its advanced technology and the quality of the components ...
ZELEC
Primary current: 250 A
Ø35 mm toroid for earth leakage relay The toroids for the earth leakage relays are used to measure alternating leakage currents (AC, A, F type components). Thanks to its advanced technology and the quality of the components used, ...
ZELEC
Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. It ...
Temperature: 10 °C - 50 °C
Voltage: 85 V - 264 V
Simple operation and maintenance Excellent chamber stability and uniformity Manual control or optional straightforward automated set point programming Humidity and temperature-controlled chamber Built in precision chilled mirror reference ...
Process Sensing Technologies
Temperature: -100 °C - 20 °C
Voltage: 100 V - 240 V
Complete dew-point calibration solution with optional compressor, dryer, dew-point generator, reference instrument and optional manifold Generated output responds quickly to a change of set point Stable humidity generation Simple operation ...
Process Sensing Technologies
Temperature: -40 °C - 50 °C
Pressure: 4.8, 8 bar
Voltage: 100 V - 240 V
Excellent long-term stability Maintenance free except for a desiccant change once every 5 years Completely self-contained Low power consumption Pressure Swing dryers provide a source of very dry compressed air for use as a zero ...
Process Sensing Technologies
TESTER OF ELECTRONIC ACTUATORS ATP-1000 The ATP-1000 tester is designed to diagnose actuators (electric valves, DC motors) of VNT turbochargers, as well as boost control solenoids, which is used in pneumatic systems. The tester allows ...
TESTER-PROGRAMMER OF ELECTRONIC ACTUATORS ATP-3000 The ATP-3000 tester is designed to diagnose actuators (electric valves, DC motors) of VNT turbochargers, as well as boost control solenoids, which is used in pneumatic systems. The ...
The Beha-Amprobe NCV-1000-EUR VOLTfix Non-Contact Voltage (NCV) tester series provides maximum safety and convenience for detecting AC voltage without interrupting electrical systems. Designed to conveniently fit in your shirt pocket, ...
BEHA AMPROBE
The test units enable versatile deployment options in manual or automated systems for the insulation resistance testing of electrical appliances and insulation materials. The switchable measurement range also enables flexible adjustment ...
ELABO
The digital magnetometers of the DM Series are based on STL’s unrivalled high resolution ADC technology with 32 bit resolution and 26 bit dynamic range. The magnetometers use fluxgates as their magnetic sensitive elements and have integrated ...
Process Calibrator CL-327A general characteristics: 1, The basic accuracy of the output of up to 0.02%, the output is displayed as 6 digit 2, The output functions: DC voltage, DC current, ohms, analog transmitters, thermocouple, ...
Tecpel Co., Ltd.
The Tecpel CL-420 is a process calibrator that is a flexible, high precision, battery operated and extremely durable hand-held process calibrator permits process technicians to reproduce and source variables signals with 0~22mA, 0~28V. ...
Tecpel Co., Ltd.
The CL 325 multi-functional process calibrator from Tecpel is equipped with a beeper warning when output is open (mA) or short (mV,V). It features K, J, E, T Thermocouple in °C and °F, easy key-pad operation, and easy step and auto ramp ...
Tecpel Co., Ltd.
Pressure: 0 psi - 40 psi
Voltage: 120 V
The CleanAir 5 CHANNEL CALIBRATOR is designed to interface EMC analysers with five individual calibration gases. The gases can be controlled manually or remotely to pass through one of the two calibration ports. Designed as a sub-rack ...
Please specify:
Help us improve:
remaining