Our highly engineered components and subsystem solutions—combined with deep expertise in advanced photonics—make us the global technology partner of choice for advanced industrial OEMs and system integrators. Our galvanometer series combines expertise ...
Cambridge Technology
... The selection of a suitable torque transducer is a basic requirement for the adjustment, monitoring and inspection of screwdrivers, and also for the testing of screw joints and screw joint analysis. Here are several examples for the use of the most ...
The Powdertester uses the methods developed by Ralph L. Carr (Carr Index) to determine the flowability, dispersability and compressibility of dry powders. The PT-X model is the latest version of Hosokawa Micron's Powdertester. Thanks to its state-of-the-art ...
... Collecting high-accuracy geospatial data on your smartphone or tablet has never been easier. Pair with all existing Leica Zeno handhelds and a wide range of Android, Apple or Windows® smart devices, to bring cutting-edge GNSS technology and industry-leading ...
Leica Geosystems
... The Uster Tester 6-C800 sets the standard for filament yarn evenness testing and plays a central role for every quality-driven producer. Overview Specialized solution for filament yarns In filament yarns, even the smallest fluctuation in evenness is ...
... In today's fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. That's easier said than done when you are ...
Frequency: 18 GHz - 40 GHz
ETS-Lindgren's Model 3116C-PA is a special version of our popular Model 3116C Double-Ridged Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit. By doing this, any possible mismatches between antenna and pre-amplifier ...
ETS Lindgren
Gain: 31 dB
... ANT-C2GA-TW-N Fixed Reference GPS Antenna Our ANT-C2GA-TW-N (formerly ANT-533) is an active fixed reference antenna designed to operate at the GPS L1 and L2 frequencies, 1575.42 and 1227.60 MHz. Its rugged, low profile construction makes it ideal for ...
NovAtel
The Silicon Labs family of CMOS digital isolators gives designers the ability to create lower cost, smaller size, higher performance, lower power, and more reliable isolated circuits than competing optocoupler solutions. With a broad product portfolio, ...
... To test the insulation resistance to DIN VDE 0100 Part 610 and the characteristic curve behaviour of the following surge voltage and lightning current arrestors: V10-C and V20-C: Uc Tolerance range 75 V -> 110 V - 130 V 150 V ...
... • Multiple output frequencies: 0.1Hz, 0.05Hz, 0.02Hz, 0.01Hz • High load capacity: up to 5.5 µF at 0.01 Hz • Measurement accuracy: ±3% • Positive/negative peak voltage error: ≤3% ± 3kV • Waveform distortion: ≤5% • Wide operating conditions: -10℃ to +40℃, ...
Huazheng Electric
... • Test Range: Ratio 0.9–10000, Current 0–2000 mA, Angle 0–360° • Ratio Accuracy: ±0.1% to ±0.5% • Current Accuracy: ±1% of reading + 0.5 mA • Angle Accuracy: ±0.2° • Output Voltage: 5V or 80V selectable • Resolution: Ratio 0.0001, Current 0.001 mA, Angle ...
Huazheng Electric
... • Output Voltage: 0–80 kV (optional) • Voltage Distortion: <3% • Booster Capacity: 1.5 kVA • Measuring Accuracy: ±3% • Power Supply: AC 230V, 50/60 Hz • Power Consumption: 200 W • Operating Temperature: 0–45℃ • Operating Humidity: <75% RH • Dimensions: ...
Huazheng Electric
... The MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments. MEASURING FUNCTIONS • Live Transformer’s Impedance Measurement with Four Wire Test • Hi-precision Short Circuit Current evaluation ...
METREL
... The MI 3215 TeraOhmHP 15 kV is a portable, battery or mains powered test instrument with excellent IP protection (IP65), intended for diagnosing of Insulation Resistance by using high DC test voltages of up to 15 kV. MEASURING FUNCTIONS • Insulation ...
METREL
... The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must. MEASURING FUNCTIONS • Continuity (2-wire & 4-wire), 0.2 A, 4 A, 10 A, 25 A + voltage ...
METREL
The Apollo 600+ features a built-in camera for visual test records, a USB memory port for data transfer and a comprehensive range of electrical safety tests with user configurable test sequences and checklists for PAT, PPM and PPE. It has storage for ...
Seaward
... More about the PV200 The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems. 999 datasets can be stored on the instrument and once downloaded to the SolarCert ...
Seaward
... The PV:1525 redefines photovoltaic (PV) system testing, combining advanced functionality with a compact, handheld design. Designed specifically for PV installers and O&M engineers, this cutting-edge tester delivers essential safety tests for PV systems ...
Seaward
... Voltage Detector of Dual Use for AC/DC New model with reduced weight of HS-20N ...
Hasegawa Electric Co., Ltd.
... Overview
Detector for medium-voltage and high-voltage lines and equipment. Lightweight design for improved operability. Not suitable for shielded (conductive shield) cables.
Key features
- Insulating stick made of FRP
Hasegawa Electric Co., Ltd.
... Overview
HST-30 is a voltage detector designed for medium-voltage and high-voltage AC systems. It provides on-site voltage presence verification across a wide AC range while remaining lightweight and easy to handle.
Key features
- Insulating
Hasegawa Electric Co., Ltd.
... ACT-1000N is automatic crimp tester with 1000N capacity. It performs crimp test automatically from testing to storing the data by simply pressing start button which enhances the testing efficiency. Feature • - Perfect solution for automatic crimp ...
... Wire crimp tester LH-500N is a lever-operated manual test stand including wire/terminal grips. With a force gauge, it offers a testing system to perform wire crimp test. Features It offers a simple and affordable yet efficient solution for wire ...
Temperature: 0 °C - 50 °C
Pressure: -0.9 bar - 20 bar
Voltage: 15 V
... The PV624 is a portable hybrid pressure controller base station that combines the advantages of manual pressure generation with fully automatic pressure generation and control. Druck’s latest pioneering technology has a built-in controller to automatically ...
Druck
Temperature: -10 °C - 50 °C
Pressure: 350 mbar - 1,000,000 mbar
Voltage: 200 mV - 30,000 mV
When Druck launched the DPI610 series pressure calibrator back in 1997, it was an instant hit. The flagship model of the company’s calibrators included seven commercial versions and four intrinsically safe versions. Today, the DPI610E is the latest evolution ...
Druck
Temperature: -10 °C - 50 °C
Pressure: 25 mbar - 1,000,000 mbar
Voltage: 4 V
Druck’s DPI620G series is advanced, modular multi-function calibrator and optional HART/Foundation Fieldbus communicator with world-class pressure measurement and generation. Building on over half a century of market leading pressure expertise, the DPI620G ...
Druck
... Capable of measuring the earth voltage The 2 mA measurement current can be used to make resistivity tests of the earth to trigger the earth circuit breakers of the circuit being tested Battery operated Self-disconnection. The timer is operated automatically ...
CIRCUTOR
Primary current: 100, 200 A
... The non-intrusive flexible current sensor provides the ability to measure alternating current in any installation with a full rejection of DC component, very low power consumption, no saturation problem, very low temperature dependence, very good linearity. The ...
CIRCUTOR
Open clamps can be used to measure current in points where the power supply can not be interrupted
CIRCUTOR
... Product Overview
- Pressure Cycle Testing up to 6,000 bar. A pressure cycle test simulates the service life of a component using a sine (wave) or trapezoidal (square) waveform.
- Suitable for testing metal and plastic components, including
... Descriptions Calibration Syringe of pulmonary function instrument Gasboard-7050 is mainly used for daily calibration and inspection of pulmonary function instrument or Spirometer. It adopts low traction piston, which is easy to operate, with high precision ...
... The universal relay testing solution ARTES 600 is the compact and universal solution for testing all types of protection relays. Because of the built-in control panel, the light weight and the low noise level, the robust test system can be used on ...
KoCoS Messtechnik AG
... SHERLOG CRX Configurable fault recorder and power quality monitor Thanks to the modular, scalable device concept, SHERLOG CRX can be equipped as needed and easily adapted or expanded to meet new requirements. Despite its compact dimensions, SHERLOG ...
KoCoS Messtechnik AG
... The robust multi-functional relay test system
ARTES RC4 is the robust and universal solution for testing protection relays. Packed in a handy, extremely robust and resistant hard shell case, the versatile test system is also ideally suited for ...
KoCoS Messtechnik AG
Voltage: 0 V - 1,000 V
... Short Description
- DC voltage: 0–1000 V
- AC voltage: 2 mV–1000 V, 10 Hz–1 MHz
- DC current: 0–30 A
- AC current: 20 µA–30 A, 10 Hz–30 kHz
- Variable resistance: 0 Ω–1 GΩ
- Variable capacitance: 300 pF–100
TRANSMILLE
Voltage: 0 V - 1,000 V
... Transmille have applied their expertise in designing bench and transportable calibrators to create a new generation of multifunction calibrators that offer true portability at a price that ensures rapid return on investment. On site calibration is ...
TRANSMILLE
Voltage: 0 V - 1,000 V
... The 3000 series offers the widest workload coverage of any multi-product calibrator, with the ability to calibrate 18 types of instrument. It has the power to drive older analogue instruments alongside the accuracy to calibrate modern digital instruments. COST-EFFECTIVE ...
TRANSMILLE
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
Humidity range: 0 % - 90 %
The CRY3018 Sound Calibrator is designed for the calibration of sound level meters, microphone sensitivity verification, and acoustic measurement system calibration. It complies with the IEC 60942:2017 Class 1 standard. The CRY3018 provides dual-frequency ...
Temperature: 0 °C - 40 °C
Noise level: 94 dB
Voltage: 9 V
CRY5611 Sound level calibrator is suitable for sound pressure calibration of sound level meters and electroacoustic testers. CRY5611 has many advantages, including high stability, small size, light weight, low power and easy to use. With the operating ...
The PCE-ERT 10 is a handy measuring instrument, which allows fast and easy determination of the earth resistance. The earthing device determines the earth resistance with three-wire technology in three measuring ranges up to 2000 Ω. By means of a rotary ...
PCE Deutschland GmbH
The electrical tester PCE-CBA 10 is a car battery tester and allows fast and easy testing of 12V voltage starting batteries. The electrical tester has various test modes to determine the condition of the car battery. The LC display of the electrical tester ...
PCE Deutschland GmbH
The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60V and a DC current range of 0… 12 A, it covers a large number of solar modules. The determined characteristic curves are saved directly ...
PCE Deutschland GmbH
... The data logger ALMEMO® 104 provides numerous outstanding functions for special applications using all ALMEMO® sensors (analog, DIGI, ALMEMO® D6) and the latest ALMEMO® D7 sensors. Using the ALMEMO® D7 input plugs the existing sensor technology can ...
Ahlborn Mess- und Regelungstechnik GmbH
... Data logger of the latest V7 generation The professional measuring instrument ALMEMO® 202-S and ALMEMO® 204 provides numerous outstanding functions for special applications using digital ALMEMO® D6 sensors and the latest ALMEMO® D7 sensors. Two or ...
Ahlborn Mess- und Regelungstechnik GmbH
Primary current: 0.5 A - 600 A
... Split-Core Type Transformer for DC Current Chauvin Arnoux type PAC16
- Current clamp for DC current
- Push button for zero setting
- Switch for sensitivity adjustment (10 mV/A or 1 mV/A)
- With polarity indicator for power
Ahlborn Mess- und Regelungstechnik GmbH
... Product overview
The 5033-HD Flushability Tester is designed to evaluate the dispersibility and degradation behavior of disposable sanitary non-woven materials in a toilet-like environment, including wet toilet paper, toilet wipes (dry/wet), ...
HAIDA EQUIPMENT CO., LTD
... Product Description
The pulp water retention value tester is designed to determine the water retention value (WRV) of various pulp samples by controlled dewatering and centrifugation according to relevant standards.
Operation Principle
A ...
HAIDA EQUIPMENT CO., LTD
... Product description
The 8018-HD BMS testing system is designed for parameter calibration, verification and production testing of battery management systems for electric vehicles and energy storage. It supports simulated battery outputs, high-precision ...
HAIDA EQUIPMENT CO., LTD