Current: 0 A - 150 A
... Product Details
Product: Battery String Simulator (BSS)
Description: Battery simulation system for spacecraft battery charge and discharge emulation
Overview
The Elgar Battery String Simulators (BSS) provide controllable ...
... Engine Testing System This system has an important role to thoroughly check and improve the quality of engines, which can be called "the heart" of automobiles and machines. We provide comprehensive systems which cover all processes including test preparations, ...
... Professional ORP/redox probes Introduction ORP (redox potential, also referred to as redox) is a measure widely used in biochemistry, environmental chemistry and water treatment. SEKO's professional-grade ORP probes are designed to meet the needs ...
... Overview
The ISOSCAN® EDS440 insulation fault locator locates insulation faults in unearthed power supply systems (IT systems) when used with an ISOMETER® iso685-D-P or the locating current injector PGH. The unit evaluates locating-current signals ...
BENDER
... Introduction
The TR5001E SII is an automated in‑circuit and functional tester tailored for PCB production testing. It integrates MDA with selectable ICT and functional test options to reduce operator interventions and support high throughput. ...
... Summary
Portable, battery-powered accelerometer calibrators of Type 8921B are designed to verify and calibrate accelerometer sensitivity in field and laboratory environments. The unit provides an accurate, controlled vibration level with closed-loop ...
Highly flexible with stackable Ø 2 mm MULTILAM plugs on both ends.
Stäubli Electrical Connectors AG
Temperature: 50 °C - 500 °C
Pressure: 70,000 Pa - 120,000 Pa
Voltage: 24 V
... The Beamex CENTRiCAL Workshop Calibration Solution reflects the result of decades of experience providing world-class solutions for the process industries. This standardized yet configurable solution is easy to use, versatile, and ergonomic. Modular ...
Beamex
... Ensures uniform, reproducible process quality. Provides an interface for data exchange with any Oetiker electronically controlled installation tool. AC or DC operation. Convenient carrying case. TECHNICAL DATA OVERVIEW All types of Oetiker Ear ...
Oetiker
Temperature: -196 °C
... Product overview
The KAYE KG-300 is a liquid nitrogen (LN2) comparator designed for semi-automated temperature calibrations at the boiling point of liquid nitrogen (about -196 °C). Used with KAYE Validators, it provides a low‑evaporation, stable ...
Kaye
... The Frequency-Finder is an electronic instrument that precisely measures the frequency used to calculate the static tension in synchronous, v-belts, and v-ribbed belts. It displays the frequency on an LCD screen. Operating Principle The Frequency-Finder ...
... Easy and safe testing For contactlessly verifying safe isolation from supply voltage on centre-earthed monophase traction power lines Cost-effective / space-saving transport ...
DEHN + SÖHNE
... RCM (the Revolution Counter for Motorcycles) is a precision tool designed by TEXA to measure engine speed on large and small motorcycles. Accurate measurement of engine speed is essential to ensure conformity to the latest MCTCNet 2 test methods. RCM ...
Temperature: 5 °C - 40 °C
Pressure: 1.03 bar
Voltage: 100 V - 240 V
... Calibrate your flow instruments, save money and time Quick, easy to use, automatic data capture Portable and battery operated Results directly traceable to NIST Sierra's CalTrak® 500 is an accurate primary standard gas flow calibrator for all inert ...
Sierra Instruments
Temperature: 0 °C - 40 °C
... FPI AQMS-200 multi-gas calibrator utilizes mass flow controller to perform standard zero and span calibration with up to 4 gas sources. Key Features • Stable trace level ozone output down to 0.1ppm; • Optional ozone generator, gas phase titration and ...
Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB ...
Teledyne LeCroy Europe
... Response time: ≤30s Resume automatically GT AC Powered Carbon Monoxide Detector can be used to detect the leakage of carbon monoxide in your houses, apartments, boat and caravan. Features AC or DC powered Valve output and relay output function Sensor ...
Primary current: 10 A
... Product Category: Current Sense Transformer Part Number: 53060C Manufacturer: Murata Manufacturing Co., Ltd. Product Details: - Current sense transformers are used for measuring alternating current (AC) by producing a reduced current accurately proportional ...
Murata Power Solutions
Our highly engineered components and subsystem solutions—combined with deep expertise in advanced photonics—make us the global technology partner of choice for advanced industrial OEMs and system integrators. Our galvanometer series combines expertise ...
Cambridge Technology
... The selection of a suitable torque transducer is a basic requirement for the adjustment, monitoring and inspection of screwdrivers, and also for the testing of screw joints and screw joint analysis. Here are several examples for the use of the most ...
... Ground Fault Detector Detects ground faults by sensing the vector sum of the current flowing through a three-conductor cable. Choice of three reset options (secondary voltage, load current, or time) to meet various application needs. Split-core sensor ...
... Collecting high-accuracy geospatial data on your smartphone or tablet has never been easier. Pair with all existing Leica Zeno handhelds and a wide range of Android, Apple or Windows® smart devices, to bring cutting-edge GNSS technology and industry-leading ...
Leica Geosystems
... Testing of round or rectangular material with through-type coils The standard program comprises sensors for material diameters of 5 mm to 200 mm. The coils' sizes, which increase in small increments, guarantee accurate test results and make it possible ...
Foerster Instruments
... The Uster Tester 6-C800 sets the standard for filament yarn evenness testing and plays a central role for every quality-driven producer. Overview Specialized solution for filament yarns In filament yarns, even the smallest fluctuation in evenness is ...
... In today's fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. That's easier said than done when you are ...
Frequency: 18 GHz - 40 GHz
ETS-Lindgren's Model 3116C-PA is a special version of our popular Model 3116C Double-Ridged Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit. By doing this, any possible mismatches between antenna and pre-amplifier ...
ETS Lindgren
The EFD 500, manufactured by Trench®, is an earth fault protection and detection system with a reliability in detecting immense earthfaults blocks in a networks that is ground resonant. Furthermore, it provides an excellent execution and reliability through ...
Gain: 31 dB
... ANT-C2GA-TW-N Fixed Reference GPS Antenna Our ANT-C2GA-TW-N (formerly ANT-533) is an active fixed reference antenna designed to operate at the GPS L1 and L2 frequencies, 1575.42 and 1227.60 MHz. Its rugged, low profile construction makes it ideal for ...
NovAtel
The Silicon Labs family of CMOS digital isolators gives designers the ability to create lower cost, smaller size, higher performance, lower power, and more reliable isolated circuits than competing optocoupler solutions. With a broad product portfolio, ...
... • Test Range: Ratio 0.9–10000, Current 0–2000 mA, Angle 0–360° • Ratio Accuracy: ±0.1% to ±0.5% • Current Accuracy: ±1% of reading + 0.5 mA • Angle Accuracy: ±0.2° • Output Voltage: 5V or 80V selectable • Resolution: Ratio 0.0001, Current 0.001 mA, Angle ...
Huazheng Electric
... • Multiple output frequencies: 0.1Hz, 0.05Hz, 0.02Hz, 0.01Hz • High load capacity: up to 5.5 µF at 0.01 Hz • Measurement accuracy: ±3% • Positive/negative peak voltage error: ≤3% ± 3kV • Waveform distortion: ≤5% • Wide operating conditions: -10℃ to +40℃, ...
Huazheng Electric
... • Multiple output frequencies: 0.1Hz, 0.05Hz, 0.02Hz, 0.01Hz • High load capacity: up to 5.5 µF at 0.01 Hz • Measurement accuracy: ±3% • Positive/negative peak voltage error: ≤3% ± 3kV • Waveform distortion: ≤5% • Wide operating conditions: -10℃ to +40℃, ...
Huazheng Electric
... The MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments. MEASURING FUNCTIONS • Live Transformer’s Impedance Measurement with Four Wire Test • Hi-precision Short Circuit Current evaluation ...
METREL
... The MI 3215 TeraOhmHP 15 kV is a portable, battery or mains powered test instrument with excellent IP protection (IP65), intended for diagnosing of Insulation Resistance by using high DC test voltages of up to 15 kV. MEASURING FUNCTIONS • Insulation ...
METREL
... The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must. MEASURING FUNCTIONS • Continuity (2-wire & 4-wire), 0.2 A, 4 A, 10 A, 25 A + voltage ...
METREL
... Product
HTE-610W low-voltage detector for AC systems with detection capability through insulating sheath and adjustable sensitivity.
Overview
Compact detector designed for non-contact voltage presence detection on AC conductors ...
Hasegawa Electric Co., Ltd.
... Overview
Low-voltage detector for non-contact voltage detection through cable covering (sheath). New model designed for electrical testing and maintenance within the specified voltage range.
Features
- Voltage detection
Hasegawa Electric Co., Ltd.
... Voltage Detector of Dual Use for AC/DC New model with reduced weight of HS-20N ...
Hasegawa Electric Co., Ltd.
Voltage: 0 V - 1,000 V
... Short Description
- DC voltage: 0–1000 V
- AC voltage: 2 mV–1000 V, 10 Hz–1 MHz
- DC current: 0–30 A
- AC current: 20 µA–30 A, 10 Hz–30 kHz
- Variable resistance: 0 Ω–1 GΩ
- Variable capacitance: 300 pF–100
TRANSMILLE
Voltage: 0 V - 1,000 V
... Transmille have applied their expertise in designing bench and transportable calibrators to create a new generation of multifunction calibrators that offer true portability at a price that ensures rapid return on investment. On site calibration is ...
TRANSMILLE
Voltage: 0 V - 1,000 V
... The 3000 series offers the widest workload coverage of any multi-product calibrator, with the ability to calibrate 18 types of instrument. It has the power to drive older analogue instruments alongside the accuracy to calibrate modern digital instruments. COST-EFFECTIVE ...
TRANSMILLE
... Overview
The X48DL3 from the X...DL3 series is a Type A‑F earth leakage relay providing automatic leakage‑current detection and continuous insulation‑status monitoring via a multi‑colour LCD. Designed for front‑panel installation in distribution ...
FRER
... General description
Type A/AC earth leakage relay for 72 x 72 mm panel mounting. Designed to detect AC and pulsating DC residual/earth leakage currents, the X72DSX provides monitoring and protection functions for industrial electrical installations ...
FRER
... Product overview
The X96DSX is a Type A/AC earth leakage relay in a 96 x 96 mm panel-mount format. It detects residual (earth) currents including AC and pulsating DC components and is designed for integration in control panels and switchboards.
Key ...
FRER
Temperature: -10 °C - 50 °C
Pressure: -1 bar - 4,200 bar
Voltage: 0 V - 15 V
AOIP
Temperature: 0 °C - 50 °C
Pressure: -0.95 bar - 100 bar
Humidity range: 0 % - 90 %
... Description
The ADT 761A portable automated pressure calibrators integrate a high-performance internal electric pump and a precision pressure controller to provide a turnkey solution for calibrating gauges, transmitters and pressure switches ...
AOIP
Temperature: -270 °C - 1,768 °C
Voltage: 0 V - 75 V
AOIP
The PCE-ERT 10 is a handy measuring instrument, which allows fast and easy determination of the earth resistance. The earthing device determines the earth resistance with three-wire technology in three measuring ranges up to 2000 Ω. By means of a rotary ...
PCE Deutschland GmbH
PCE Deutschland GmbH
... Drive belt tension gauge for fast and accurate measurement of belt tension Memory for 750 measured values / graphic display / easy operation / multilingual menu / measurement in Hz and N The belt tension gauge is an optical measuring maintenance tool ...
PCE Deutschland GmbH
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
Humidity range: 0 % - 90 %
The CRY3018 Sound Calibrator is designed for the calibration of sound level meters, microphone sensitivity verification, and acoustic measurement system calibration. It complies with the IEC 60942:2017 Class 1 standard. The CRY3018 provides dual-frequency ...
Temperature: 0 °C - 40 °C
Noise level: 94 dB
Voltage: 9 V
CRY5611 Sound level calibrator is suitable for sound pressure calibration of sound level meters and electroacoustic testers. CRY5611 has many advantages, including high stability, small size, light weight, low power and easy to use. With the operating ...
... Descriptions Calibration Syringe of pulmonary function instrument Gasboard-7050 is mainly used for daily calibration and inspection of pulmonary function instrument or Spirometer. It adopts low traction piston, which is easy to operate, with high precision ...
Temperature: 19 °C - 21 °C
... Product overview
TR is a presetting bench designed for workshop and calibration environments. Approximately 80% of units are placed beside work centers and 20% are used as calibration masters. TR simplifies presetting of 2‑point (ID and OD) ...
Temperature: 10 °C - 35 °C
... Product subtitle
T-ALL is a workshop-capable bench for setting, presetting and calibration that integrates a patented measuring function for fast in-line checks.
Product overview
T-ALL upgrades the TR family by adding a preloaded ...
... Overview
T-SHAFT MAN is a manual measuring bench designed for fast, workshop-level inspection of shafts. Diameter (X) and length (Z) axes are positioned and operated by the operator; repeatability is ensured by a dedicated mechanical system. ...
... Calibration Target Micro V1
Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system.
Calibration Target Micro V1 is unique in that it combines very useful resolution data, combined with ...
... The stage micrometer from Opto in the form of a microscope slide is required for the calibration of microscopes.
- Glass scale 50 mm in 0.1 mm and 0.01 mm
- Calibration of measurement software
The Stage Micrometer is also available ...
... Opto's Particle Test Target allows the calibration of measurement functions in microscopes through objects in different forms and sizes or of resolution of an optical system measured in Line Pairs per mm. It is used in the field of Residual Dirt Analysis.
The ...