Other electrical measurement equipment

Automation is not only a matter of efficiency. It also involves the need to increase the security and longevity of the operation. Reducing measurement errors in installations subject to electrical potential differences means protecting employees and equipment ...

The DigiRail-VA is the latest addition to the successful and cost effective DigiRail family. Specifically designed for single phase AC power analysis applications, it is able to measure the most important AC signals and retransmit them in both analog ...

... The HS3 is the ideal solution for rapid setting and calibration of variable-size measuring instruments. Thanks to its exceptional accuracy and robust construction, it is equally at home on the production floor or in the laboratory. Based on the proven ...

Temperature: 10 °C - 40 °C

... Horizontal Calibration Instrument for Laboratory Measuring bench for the checking of fixed and variable dimension measuring means. A top range for daily use in workshop or in laboratory. The Horizon Calibration HC3 and HC4 instruments fulfill today’s ...

This earth fault detection ISOLTEST Medical series was designed for operating theatres for continuous monitoring of insulation resistance to earth, systems connected to monophase and threephase networks up to 500 V with neutral insulated from earth downstream ...

This earth fault detection ISOLTEST Industry series was designed for any industrial application for continuous monitoring of insulation resistance to earth, on systems connected to monophase and threephase mains networks up to 500 V with neutral insulated ...

This earth fault detection ISOLTEST Naval series was designed for any naval use for continuous monitoring of insulation resistance to earth, on systems connected to threephase without neutral mains networks up to 240 V. When the insulation resistance ...

... ALED3 is an additional device ensuring safety to the operator within live powered environments warning him about a risk of danger. Improved safety of the operator: presence of an electric field (1kV to 66 kV) as identified by a sound and visual ...

... Application: For measuring the height of LV and MV network conductors. Outdoor. Features: Material: insulating tube made of epoxy resin, glass fiber reinforced. Composed by 8 parts and locking by push button. Plan terminalk ...

... Application: Bipolar controllers can see potential differences between any two points of a High Voltage installation. Mainly reserved for finding drivers of the same phase (matching), they can also be used for bipolar detection and High Voltage ...

... 3-phase mains detection + change over management module The MNS monitors 3-phase mains voltages and manages the change over of both the generator and the mains contactors. It must be connected to an automatic start module in parallel. ...

... The SCR2.0 is a microprocessor controlled synchroscope with a programmable synch check relay in a DIN96 front panel mounted package. It controls the voltages and frequencies of two independent power sources, as well as the phase angle between them. The ...

... Synchronization and safety column The C2S is a Synchronization and Safety column for controlling the paralleling of two AC sources. This second-generation microprocessor module incorporates all the visualization and control functions for manual ...

... Multifunctional Installation Tester Installation tester for standards-compliant testing in electrical systems and installations in accordance with IEC 60364-6 (DIN VDE 0100-600), DIN EN 50110-1 (DIN VDE 0105-100), IEC 61851-1 (DIN VDE 0122-1) and the ...

... The new installation testers included in the PROFITEST MF series are ideally matched to the electrician’s requirements and are specially designed for the implementation of electrical tests in installations and systems – day in, day out. The MF series ...

Mobile battery tester for voltage measurement; measurement for the electrical internal resistance and the electrochemical impedance of a battery block; capacity test via logging of current values and voltage curves; integrated Bluetooth interface, integrated ...

The Magtrol 7500 Series Power Analyzer is an easy-to-use instrument ideal for numerous power measurement applications. From DC to 80 kHz AC, the 7500 measures volts, amps, watts, volt-amps, frequency, crest factor, Vpeak, Apeak and power factor in one ...

... Shaft copying system – absolute positioning of the elevator car. LEB02 is an extremely robust, compact and contactless measuring system. With a resolution of 1 mm and a travel speed of up to 8 m/s, absolute position values of the elevator car are determined ...

... Capture linear motion rotationally Measuring wheel systems from Kübler are the ideal solution for reliable speed, position and distance measurement in applications with linear movements. These are recorded rotationally via the measuring wheel with attached ...

... Capture linear motion rotationally Measuring wheel systems from Kübler are the ideal solution for reliable speed, position and distance measurement in applications with linear movements. These are recorded rotationally via the measuring wheel with attached ...

... Accucarb ZCC probe with zirconium oxide The ZCC probe is a high-accuracy oxygen probe, with zirconium oxide, designed for the heat treatment industry. Introduced directly into the oven, at the same working temperature, it performs the measurement ...

... The CDF60 calibrator checks the calibration of leak and flow ATEQ instruments as well as any other instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised ...

Temperature: 5 °C - 45 °C

... The CDF7000 allows you to check the calibration of leak and flow measurement instruments, as well as calibrated leaks and jets. This portable, compact and user-friendly instrument lets you adjust very accurately your leak or flow rate with a real time ...

Pressure: 1 bar - 4 bar

... Overview
The CDH6000 is a gas H2N2 (5% hydrogen) supply designed to check the calibration of the H6000 leak detector. It can be used with one or several calibrated leaks.

Features

• Gas supply: H2N2 (5% hydrogen) for calibration

Primary current: 1,000 A

... Measuring range [A] 1000 Error [ 1 Output signal -4 ~ 4 V Supply voltage [V] 15 Opening form Rectangular Case type Split coreMounting Conductor rail mounted Opening diameter [mm] 6.5 mm, ...

Primary current: 300 A

... Measuring range [A] 300 Error [ 1 Output signal -4 ~ 4 V Supply voltage [V] 15 Opening form Rectangular Case type Split core Mounting Conductor rail mounted Opening diameter [mm] 9.5 ...

Primary current: 600 A

... Measuring range [A] 600 Error [ 1 Output signal -4 ~ 4 V Supply voltage [V] 15 Opening form Rectangular Case type Split core Mounting Conductor rail mounted Opening diameter [mm] 9.5 ...

... Functions Combined with Laser interferometer SJ6000, Preicision TurnTable WR50 can measure rotary axis of machine tools. System provides error compensation data for rotary axis after measurement. Parameters 2. Max rotation speed: 10rpm 3. Pitch ...

I.S. SIL2 Bus-Powered Digital Output DriverThe Bus-Powered Digital Output Isolator D5240 is a module suitable for applications requiring SIL 2 level in safety related systems for high risk industries. It can drive solenoid valves, visual or audible alarms ...

SIL2 Vibration Transducer InterfaceThe Vibration Transducer Interface D6062S is a high integrity analog input interface suitable for applications requiring SIL 2 level in safety related systems for high risk industries. It provides a fully floating dc ...

The Vdc/Vac Voltage Detector X1-NIS-RLI-01 module is a unit suitable for applications requiring SIL 3 level in safety related systems for high risk industries. The module is able to reflect the presence of a 24 to 220 Vac/Vdc nominal input signal to the ...

Temperature: 0 °C - 50 °C
Pressure: -0.85 bar - 10 bar
Voltage: 3 V

The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated ...

Temperature: 0 °C - 50 °C
Pressure: -0.85 bar - 25 bar
Voltage: 3 V

The MPX pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 25 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated ...

Temperature: 0 °C - 50 °C
Pressure: 0 bar - 700 bar
Voltage: 3 V

The HPX high-pressure calibrator is a high-precision calibration instrument for pressures between 0 bar and 700 bar. The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal ...

... - API SwivelCheck is light-weight & comes with a convenient carrying case to easily transport & install on a variety of CNC machines. - Swivelcheck is the only tool that can be mounted off rotating axis center to measure swivel axes and trunnions without ...

Each DSCL20 loop powered isolator provides a single channel of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL20 loop powered isolator operates passively, ...

Each DSCL20 loop powered isolator provides a single channel of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL20 operates passively, obtaining its power from ...

Each DSCL21 loop powered isolator provides a single channel of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL21 loop powered isolator operates passively, ...

... Individual voltage alarm with headlamp Standards Complying with EC European Directives EN 61000-6-2 / EN 61000-6-4 Use ALADIN is a personal electric field detector combined with a professional headlamp. It provides the wearer with an audible ...

... / Standards • IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C • CE compliante / Use These voltage detectors are designed for "proving dead". making sure that nominal voltage is actually absent on a circuit ...

... / Standards • CEI 60855-1 • ASTM F7I1 • CEI 62193 • ASTM F1826 Use Telescopic poles from 3 to 9 elements. adaptable to all application configurations. Thanks to their outstanding mechanical properties, these poles can be used for a wide range ...

... Easy location of ferromagnetic objects The FerroTec FT 10 helps you safely and reliably locate concealed shaft covers, sliding rods and caps, as well as pavement markers and other objects. The only requirement is that they are made of iron, cast iron ...

RC150 is a flexible current transducer based on Rogowski principle, particularly suitable for measurement in combination with portable devices. RC150 coils are available in different sizes and can be supplied according to customer’s design, therefore ...

RC190 is a flexible current transducer based on Rogowski principle, particularly suitable for measurement in combination with portable devices. MFC190 coils are available in different sizes and can be supplied according to customer’s design, therefore ...

... RC-V250-100 shielded coil have been designed for accurate non-intrusive measurement of AC, pulsed DC or complex waveforms This type of transducer may be used to measure all AC current from low frequencies to 5 kHz. Cable lenght - 2 m Coil lenght ...

Temperature: 0 °C - 45 °C

... The Flow Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator which removes the need to ...

Temperature: 0 °C - 45 °C

... The Flow Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator which removes the need to ...

Noise level: 94 dB - 114 dB

The field calibration of Sound Level Meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that instruments are providing consistently accurate readings necessary for ...

... The Schütz Messtechnik borehole probe with sight glass dust and water filter is designed specifically for gas concentration measurement below the ground surface. This gas measurement probe has a very robust construction that has proven itself over many ...

The bell probe has an integrated dust and water filter. This gas measurement probe is for gas detection and gas measurement on unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground gas main inspection or ...

The accessibility of gaslines for gas leak detection or gas measurement tests in industrial companies is often a major problem, but no longer with this probe! The extendible probe is designed to reach gas pipelines that run along the ceiling of industrial ...

... PRIMARY CALIBRATOR 4046 SKU: 4046 The Primary Calibrator 4046 has a range of 2.5 to 300 liters per minute (L/min).PRODUCT DETAILS This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously ...

... PRODUCT DETAILS The Primary Calibrator 4146 has a range of 0.01 to 20 liters per minute (lpm). This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be ...

... Universal primary injection test set for substation assets The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, and cuts down testing time. Therefore, the ...

... High-precision capacitance and dissipation/power factor measurements Precise testing on various electrical assets The portable TANDO 700 system offers high-precision measurement of dissipation/power factor (Tan Delta) and capacitance for high-voltage ...

... Radio Influence Voltage (RIV) measurement calibrator Reliable partial discharge testing on transformers Our RIV1 calibrator is used for the calibration of high-voltage partial discharge (PD) test set-ups on power, current and voltage transformers. ...

Multifunction meter for installation flush mount 72x72 mm

... The EMM-D... digital multimeters are made in DIN modular housing, 3 and 6 module. The TRMS measurements allow correct operation even in critical conditions. The main measurement parameters are: • Voltage (line and total) • Current (phase and total) • ...

... The EMM-... VA digital multimeters are made in a modular 6-module housing. The measu- rements made in TRMS (True Root Mean Square / true effective value) allow correct operation even in critical conditions. The main measurement parameters are: • Voltage ...

Temperature: -20 °C - 50 °C
Pressure: -14.5 psi - 10,000 psi
Voltage: 0 V - 28 V

Building on the success of its predecessor, the HPC40, the HPC50 series introduces several key improvements, including enhanced battery life, a more advanced display, an extra external module connection, and intrinsic safety features. This dual pressure ...