Other electrical measurement equipment

RTD Transducers are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels. We are the exclusive North American Representative for this special line of transducers manufactured by RTD in ...

Manual bolt hole probes have coils that are positioned at right angles to the probe’s shaft length. The probes are rotated by hand inside the bolt hole with the fastener removed. Standard (fractional and metric) and custom diameters are ...

Spot probes are used for discovering flaws both on and below surfaces. Available in a broad frequency range, their diameters are usually large for accommodating lower frequencies or scanning large areas. Because spot probes contain large ...

Highlights - Earth measurement by loop methods - Continuity measurement at 0.2A - Insulation testing - RCD testing: current and trip time Description Complete and lightweight, the C.A 6131 multifunction tester can be used to perform ...

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...

Moulded measurement leads: Premium range of Ø 4 mm measurement leads PVC for ruggedness and good resistance to chemical stress, … or SILICONE for greater flexibility and resistance to high temperatures: this range of measurement ...

Pressure: -0.85 bar - 25 bar
Voltage: 24 V

General information The model CPH7000 process calibrator is a precise, portable calibrator for the calibration and checking of analogue pressure measuring instruments, pressure transmitters and process transmitters. The CPH7000 in Ex ...

General information The portable pressure calibrator model CPH7650 is a compact, portable pressure calibrator, which has been designed for mobile use as well as for stationary workshop and laboratory testing. An integrated electrical ...

Temperature: 20 °C - 375 °C
Voltage: 230, 110 V

Versatile in application Nowadays, fast and simple testing of thermometers is a “must” when it comes to the operational safety of machines and plants. The portable calibrators of the CTx9100 family are particularly suited to local calibration ...

Smiths Interconnect offers a wide range of Spring Contact Probes to meet your testing needs and has been recognized as a world leading provider for over 40 years. Smiths Interconnect offers two high current probe designs. The SH Series ...

High Current Spring Probes Smiths Interconnect offers a wide range of Spring Contact Probes to meet your testing needs and has been recognized as a world leading provider for over 40 years. Smiths Interconnect offers two high current ...

High Current Spring Probes Smiths Interconnect offers a wide range of Spring Contact Probes to meet your testing needs and has been recognized as a world leading provider for over 40 years. Smiths Interconnect offers two high current ...

For fast verification of partial discharge activity in MV and HV plants Universal application range, thanks to variety of sensors For a quick assessment of the condition of the switchgear and cables Allows the allocation ...

High resolution of 1 mΩ, ideal for large earth (ground) systems Versatile tests modes High accuracy for earth (ground) electrode grid and soil resistivity tests Rechargeable battery power that can last all day with ...

Non-contact detection of AC voltage Automatic audible warning buzzer Bright red voltage indicator in tip Ultra bright LED torch The Megger VF3 voltage detector is a compact pen-style instrument to identify the presence ...

Temperature: -200 °C - 800 °C
Pressure: max 1000.0 bar
Voltage: max 25.0 V

Crystal HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The Crystal HPC50 pressure calibrator combines professional ...

Temperature: -45 °C - 400 °C
Pressure: 1,034.21 bar
Voltage: 0 V - 30 V

The Crystal HPC40 Series handheld pressure calibrator is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to 50°C. It features an easy-to-use interface, 0.035% of Reading Accuracy, ...

Pressure: 344.74 bar

The Crystal 30 Series pressure calibrator is a wide range digital pressure calibrator that fits into your pocket. It features internal sensors that give you 0.05% of reading accuracy and resist damage from overpressure, can measure vacuum ...

Temperature: 5 °C - 430 °C

- Wide temperature range - Built in program for thermal switch testing - Maximum temperature of 430°C/806°F - Fast heat up and cool down - 10 insert formats available - Independent over-temperature protection - Only 4kg with included ...

Temperature: -20 °C - 140 °C

The Tecal 140F is part of a new range of light-weight and portable field Dri-Block calibrators. This model operates from 45°C below ambient (typically -20°C) up to 140°C. All Tecal 140F models are offered with RS-232 communications ...

Temperature: 5 °C - 425 °C

The Tecal 425F operates from 5°C above ambient to 425°C and reaches maximum temperature in 12 minutes. This lightweight and easily portable unit weighs 6.3kg and has a temperature accuracy of ±0.3°C and a temperature uniformity of ±0.2°C. ...

The 603B handheld battery capacity analyzer tests 6 and 12 volt sealed lead acid batteries with capacities up to 100 ampere hour (Ah). Test results include voltage, state of charge, and internal resistance. This analyzer also features ...

This kit is ideal for general purpose electronic and electrical trouble shooting or repair. Kit contains flexible pincer and alligator clips for larger components and miniature hook clips for smaller ones. Included Test Lead Accessories: - ...

The Model 570A series of Linear IC Testers from BK PRECISION employs an integrated test library that has all analog IC's like op-amps, comparators, voltage regulators and references, analog switches and multiplexes, opto-isolators,c couplers, ...

R&S®OS is designed as a control and open switch platform that enables easy and quick implementation of control tasks and RF switches. This device is appointed with several modules, which makes it a perfect fit for a wide range of applications- ...

The R&S®CompactTSVP range of products features a chassis equipped with a mechanical frame, digital and analog backplane, mains switching and filtering in addition to the power supply and diagnostic tools. It is intended for a range of ...

Voltage: 4, 400 V

Rohde & Schwarz R&S®FSMR measuring receiver is ideal for measurements in calibrating signal generators as well fixed or variable attenuators. It can handle frequency in the range of 20 Hz to 3/26.5/43/50 GHz. It features a high-precision ...

Measurement of rotary axes with an accuracy up to ±1 arc second Totally wireless operation and modular mounting systems ensure suitability for a wide range of machines. Optional software allows operation 'off-axis', essential for many ...

The GTS gear tooth sensors are a low cost solution for a wide range of speed sensing applications. Commonly called speed sensors or AB sensors these compact devices provide a reliable and accurate position, speed and direction feedback. The ...

The gum content tester helps to prevent induction-system difficulties by measuring the unevaporated residue of fuel that may lead to deposits and sticking intake valves. The multi-function head for simultaneous positioning of all 5 sample ...

Pressure: 0 Pa - 1 Pa

The new Yokogawa CA700 Portable Pressure Calibrator is equipped with a silicon resonant sensor that uses Yokogawa proprietary DPHARP technology. The CA700 can measure pressures with an accuracy that is within ±0.01% of rdg*, making ...

The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, ...

Temperature: -20 °C - 60 °C

The CA150 Handy Calibrator is a comprehensive source and measure instrument for your calibration and equipment checking needs at maintenance sites. The CA150 can simultaneously source and measure voltage, current, resistance, Thermocouple, ...

The EXTT Series Torque Testers provide a rapid and user friendly way to calibrate and setup lower torque handheld precision for the fastening of tools. This includes electric and air screwdrivers, pulse tools, and nut runners. As a ...

Transducers Expert Transducers, available in stationary and rotary styles, are designed for use with the Expert EXTA Torque Analyzer or other analyzers for bidirectional measurement of precisely applied torque and angle on an actual ...

The HBM BN100A bridge calibration unit excels in precision when calibrating measuring chains and equipment. The BN100A bridge calibration unit is added in the measuring system in place of the transducer, or directly connected to the ...

The K3607 calibration unit can be used to calibrate measuring amplifiers or measurement chains without imposing a mechanical quantity on the strain gage transducers belonging to the measurement chain. For this purpose the calibration ...

Calibration is fundamental to correct measurement – therefore, you should place heavy demands on the calibration units of your amplifiers. The PC-controlled K148 calibration unit from HBM provides maximum safety and reliability for your ...

Temperature: -20 °C - 70 °C
Pressure: 0 Pa - 68,947,572.93 Pa
Voltage: 24 V

The Ashcroft® ATE-2 handheld calibrator is an exceptional instrument performing precision measurement of pressure, temperature, current or voltage. The base unit includes application-specific firmware for convenient instrument calibration ...

Temperature: -20 °C - 70 °C
Pressure: 0 Pa - 68,947,572.93 Pa

The Ashcroft PT pressure tester has a zero adjust and memory setup with many engineering units and variable damping feature. The RS232 I/O setup has a backlit display with a rechargeable battery. Designed with a display that can read ...

The compact 39E Frame platform is made of rugged aluminum material. Its 39E-frame is 15 in. high, and handles 6U cards. It offers two-slot tests and a development platform for 3U and 6U VPX. They are supported with a form factor adapter ...

Elma's VPX/64X Hybrid, Type 39E-Frame, Test Platform (Tall) performs in extreme measures due to its versatility when it comes to its 39E-frame that has an overall 12U to hold 6U cards and its rugged aluminum construction. Its full size ...

The Type 39E Frame has a durable aluminum build. The versatile frame adheres to 3U, VPX development. Being a 12U overall, the 39-E Frame can hold 6U cards. It is offered in the compact and complete versions, with 49HP and 84HP respectively, ...

Temperature: 10 °C - 260 °C

The calibration of this device is done from the ambient temperature range between 10 and 260 degrees Celsius. In addition to this, the design is a rugged, handheld one, making the unit completely portable. This device is also able to ...

Temperature: -18 °C - 149 °C

The BB701-230VAC is a device that has a portable rugged designed that calibrates from -19 to 149°C (0 to 300°F ). It functions as a quick and accurate infrared pyrometer calibrators. It has a built in Digital PID autotune temperature ...

Voltage: 250 V

The Compact Multifunction Calibrator is a state of the art product designed and manufactured by OMEGA. It features an auto step and sweep function along with memory functions. It is designed primarily to provide simultaneous source and ...

Balluff cylinder sensors for C-slots are magnetic cylinder sensors known for its extremely strong hold. The product is ideal for applications with confined spaces. Short designs that are ideal for all types of gripper and short-stroke ...

Our magnetic cylinder sensors for C-slots distinguish themselves with their firm grip. Features: can be mounted flush – suitable for space-critical applications; can be installed from above – also fit where the slot ends are closed; contact-free ...

The Balluff mini-sensors provides a solution for short-stroke cylinders and mini-grippers applications. Although the mini cylinder switches are very compact they have an exact switching point while delivering maximum precision despite ...

Magnetic field sensors are used in particular for contactless detection of the piston position in pneumatic cylinders. Using a patented operating principle, our magnetic field sensors detect permanent magnets of different strength attached ...

Schmersal Ex certified EX-BNS 120 safety sensors are enclosed by thermoplastic material compatible with the demands of food processing industry. These have a particularly large switching distance, and Ø M12. The long life, immunity to ...

EX-BNS 180 series offers safety sensors which are designed to be mechanical rub proof entailing longer life expectancy. These are also built with thermoplastic enclosure and with complete assessment. These materials are unresponsive to ...

The EX-BNS 303 is an ex certified which is made up of a thermoplastic enclosure that can last a lifetime. It doesn't wear mechanically and it's suitable for the food processing industry. This product is insensitive to transverse misalignment ...

The ROHM voltage detector IC series are reset IC with highly accurate detection voltage of ±1% , low current consumption, small thin packages and wide range of detection voltage. They can be used for every kind of application equipped ...

For applications requiring open/close or slide detection (i.e. in mobile phones), ROHM offers magnetic switch Hall ICs and Hall ICs for wheel keys and trackballs.

ROHM's Over Voltage Detector ICs are highly accurate, with ultra-low current consumption feature that uses CMOS process. The lineup includes N-channel open drain output with detection voltage of 3.83 V and hysteresis voltage of 30mV. ...

perfectControl motorised calibrating and adjusting unit represents a simple and easy solution for calibration of torque wrenches. It is designed for fast and simple integration and is equipped with a simple user-friendly control interface ...

EURO voltage tester screwdriver is made according to the new EN standard, and is compliant with the current VDE GS standard. Its housing and handle are made out of plastic, and it can be used with voltages ranging from 125 to 250 V AC. ...

built to conform to the new EN standard, tested to conform to the currently valid VDE GS standard, with plastic handle, AC 125–250 V

This external rotary, non-contact transducer is a suitable system for torque-acquisition and documentation for all assembly requirements and screw-joints when used in connection with a DEPRAG measuring instrument. Screw-joint analysis ...

The MLK..., MEB1,5-R, MLB1,5-R, MS2...-S, MS2...-B Series, manufactured by MULTI CONTACT (MC) are test lead product lines used for medical applications. These devices are made base on the DIN 42802. They are all equipped with insulation ...

This line of highly-flexible connecting leads is fitted with either TPE or silicon insulation that allow the leads to be steam sterilized, and all are in accordance with DIN 42802. One end of the lead is fitted with a universal electrode ...

This product has stackable Ø 2mm safety plugs on both ends that are highly flexible in safety test.

The CSN Series of closed loop current sensors are based on the principles of the Magnetoresistive or Hall effects, and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly ...

The open loop current sensors is capable to provide output voltage proportional to measured current without using any feedback control. The compact size device with low power consumption are suitable for battery powered circuits. the ...

The SS361CT and SS461C High Sensitivity Bipolar Latching, Hall-Effect Digital Sensor ICs are small and versatile, hence they are easily operated from a permanent magnet or an electromagnet. Their design is such that they can respond to ...