- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Flow meter accessories
Flow meter accessories
The Clextral Preconditioners Standard Evolum V2 is engineered with dual counter-rotating shafts and multiple water and steam injection points for optimal Processing. This proven design, in use since 2001, ensures efficient preconditioning with top doors ...
... Product Description: Z-FLOWCOMPUTER-B is a flow computer for water, steam, and gas applications. The unit is equipped with 4 PNP/NPN digital inputs, 2 voltage/current analog inputs, 1 universal analog input, 2 relay digital outputs, and 1 analog voltage/current ...
Z-FLOWCOMPUTER, supplied with a 4,3” touchscreen HMI, is a flow computer for water, steam and gas applications. The unit is equipped with nr. 4 PNP/NPN digital inputs, nr. 2 voltage/current analog inputs, nr. 1 universal analog input, nr. 2 relay digital ...
S2000 calculation module is a microprocessor instrument equipped with both digital and analog I/O's and it is able to operate on them many types of calculations. The calculations settings can be entered via PC using a specific software (it can be supplied ...
... FLOAT SWITCHES MAC3 float switches are recommended for installation with clear or slightly soiled wastewaters and can be used for emptying only, since they are designed for operation solely in ON/OFF mode. ...
... FLOAT SWITCHES LEVEL float switches are recommended for installation in large tanks in view of their long strokes, and are suitable for use with soiled liquids. They are multicontact type, and can therefore be connected in "normally closed" or "normally ...
... Product Overview
Online monitoring solution for drinking water quality. This pressurized turbidity sensor uses 90° laser nephelometry (660 nm) to detect scattered light from suspended particles and convert it to turbidity values via calibration. ...
DABECO Co.,Ltd
... Overview This online turbidity analyzer is engineered for continuous drinking-water quality monitoring using 90° laser scattering (660 nm).
Scattered light from suspended particles is measured and converted to turbidity values via calibration. ...
DABECO Co.,Ltd
... Product Overview
Turbidity Sensor is based on the method of combination of infrared absorption scattered light. Infrared light which the photo source sends out is scattered by suspended particles in the sample. And finally converted to electrical ...
DABECO Co.,Ltd
... The Optek-ASD sensors are mounted in a port (12 mm or 25 mm) on the top plate of the vessel. Using the NIR absorption the sensors provide data on the growth of microorganisms and cell cultures Control based on results and real-time analysis The eve® ...
ZDYG-2088-01QX turbidity sensor light scattering method based on combination of infrared absorption, infrared light emitted by the light source after the scattering of turbidity in the sample. Finally, by the photodetector conversion value of electrical ...
Shanghai Boqu Instrument Co.,Ltd.
... Diameter range DN 40–DN 200 Pressure rating PN 10 I PN 16 The adjustable orifice plate is used to adjust flow rates at constant pressure. To change the flow rate, the valve plate can be twisted to expand or narrow the opening. If the opening ...
... The laminar flow hood for cell marking is shielded by 5 mm of lead on 4 sides and equipped with a lead glass working shield that slides laterally. Features Hood equipment: ⦁ A class II Bio Safety Cabinet BSC ⦁ Lighting of the work surface by ...
The ClariVue™20 is an ISO 7027-compliant, submersible, 90-degree, side-scatter turbidity sensor in a rugged titanium housing, making it the ideal choice for highly corrosive environments. The side-scatter turbidity measurement can be used as a surrogate ...
... Detailed information is shown on construction drawings provided by Buyer or prepared by Alf-Sensor. Basic dimensions required according to above mentioned standards are show on the catalog card. Note: bore diameter shall be provided by Buyer, alternatively ...
Alf-Sensor
... Air speed meter in the range 1÷12 m/s with 4÷20mA analogue output. The air velocity sensor MPSN20 is composed by a sensible element wired to an electronic circuit in a plastic housing. The equipment has 3 connections for the supply and the 4÷20mA analogue ...
... FLY-1B Air Capture Hood adopts the pitot principle. It can measure automatically the multi-spots to the wind pressure in many times. Its average amount of wind is correct, fast and simple. It is widely used in mensurating the in-out wind of the air-conditioning ...
Zhejiang FUXIA Medical Technology Co., Ltd.
... To boost and control the powder fall under a silo or hopper The anti-bridging breaks the lumps and helps the material flow. There are two kinds of anti-bridgings: with conical bottom and flat bottom depending on the application. Made from painted ...
... Liquid Level Floater Features Level switches are a control element with a mechanism that provides electrical contact according to the increase and decrease of a certain volume of water level such as a tank or well. They are designed to ensure that ...
... The VisoTurb® is an optical based turbidity or TSS (total suspended solids) sensor for the IQ SensorNet process monitoring and control system. - The VisoTurb sensors are precisely calibrated with a multi-point factory calibration. The calibration is ...
The easy to assemble duct components of Nordfab Quick-Fit ducting, allow fast installation with no special tools, no welding, and no paint. By using a Clip-Together ducting, the installation time and costs are being reduced, making Nordfab the World's ...
... Tiling and installation works Dust-free, dry diamond core drilling in tiles, stoneware, ceramics, marble, granite Dust-free, precise working on tiles before installing, even on large tiles Suitable for all angle grinders and rotary ...
... Float for Safety Waste Caps with mechanical or electronic level control (spare part to reorder / replace). Floater, mechanical / electronic, length 120 mm, PE-EL/PP ...
... The Remote AV Sensor is the ideal solution for unidirectional flow and ventilation monitoring in cleanroom environments and for HVAC applications. The Remote AV Sensor has a highly accurate sensor for measurement of low air velocity and is most suitable ...
... The lube oil conditioner offers a range of capabilities with the following elements: Automatic air eliminator Control panel Differential pressure gauge Heating (optional) Level water gauge Microfilter separator Pumping ...
... Continuous turbidity measurement Application drinkable and waste water plants, well water monitoring, filtration control, flocculants dosage, phase separation, pollution survey ...
Temperature: -20 °C - 60 °C
Pressure: 0 Pa - 2,500 Pa
Flowcal Air Multifunction Calibrator allows to perform all necessary controls to verify the calibration of some parameters, which are normally measured by sampler, like flow rate, pressure and temperature. This characteristic makes Flowcal Air unique ...
... This probe can be inserted into closed pipelines with different diameters through two flanges, ANSI 150 (other on request). Turbidity of the sample is measured according to nephelometric principle, 90°. 701H and 701G probes can withstand high temperatures ...
... MDPE Floater Specifications: 1. HDPE Pipe for sand or sea water dredging 2. O. D. (mm): 140-1150, customized sizes available 3. PN: 4-16(0.4-1.6MPa) 4. Color: White, black, customized 5. High quality and competitive price Features: 1. ...
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group