Width: 390 mm
Height: 480 mm
Depth: 830 mm
... The curing oven for heat shrink tube is widely applied for wire harness industries. 2000 Watts bring big heating effiency to the oven, This oven is ideal for heat shrink tubes with the diameter less than 25mm. • The curing oven for heat shink tube ...
... General Information The VMK high temperature chamber furnace are classified into the three range of 1400°C, 1600°C and 1800°C models Types of Temperature : The three models in each temperature are bench mounted with side ways sliding door. The ...
TEMPSENS
Maximum temperature: 0 °C - 250 °C
The oven is designed to work up to maximum temperature of 250ºC.The main structure is made with high quality mild steel angles and the heating muffle of oven is made of Stainless Steel grade. Outer body shall be made of CRCA sheets with neat powder coat ...
TEMPSENS
Maximum temperature: 1,400, 1,600, 1,800 °C
... The VMK high temperature chamber furnace are classified into the three range of 1400°C, 1600°C and 1800°C models The three models in each temperature are bench mounted with side ways sliding door. The combination of low thermal mass insulation ...
TEMPSENS
Maximum temperature: 5 °C - 300 °C
Capacity: 140 l
Width: 45 cm
... Overview
The LABWIT Back Heating Oven ZXRD-A7140 is a 140 L forced-air drying oven engineered for routine laboratory and industrial thermal processes. It supports glassware drying and sterilisation up to 300°C and controlled heating applications ...
Labwit Scientific
Maximum temperature: 5 °C - 300 °C
Capacity: 230 l
Width: 72 cm
... Product overview
LABWIT forced-air drying oven model ZXRD-A7230, 230 L capacity. Designed for routine glassware drying, sterilisation and controlled heating processes including aging, bonding, curing, annealing, stress relieving, burn-in and ...
Labwit Scientific
Maximum temperature: 5 °C - 200 °C
Capacity: 210 l
Width: 69 cm
... Overview
The LABWIT forced-air drying ovens are designed for routine laboratory tasks from glassware drying and sterilization up to 200°C to controlled heating applications such as aging, bonding, curing, annealing, stress relief and burn-in ...
Labwit Scientific
Maximum temperature: 300 °C - 1,200 °C
Width: 342 mm
Height: 424 mm
AOIP
Maximum temperature: 18 °C - 28 °C
Width: 60 cm
Height: 56 cm
... Overview
The ITL-M-17725 maintenance oven is designed for use with large mercury fixed-point cells. Easy to operate, it provides plateaus of 8 to 12 hours and includes two auxiliary wells for thermometer pre-conditioning. The temperature is ...
AOIP
Maximum temperature: 100 °C - 1,210 °C
Width: 17 cm
Height: 34.5 cm
... OVERVIEW of the high-temperature furnace
The Additel ADT875-1210 and ADT878-1210 calibration furnaces are designed for thermocouple calibration across a working range of 100 °C to 1210 °C. They deliver high stability and uniformity, feature ...
AOIP
... The HS1 drying oven from FARRAÚS is an essential component within plasterboard production lines. It is crucial in environments where climatic conditions or manufacturing rhythms require artificial and controlled drying. Thanks to its continuous hot air ...
Maximum temperature: 1,000 °C
... 3117-200 | 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing Features: 90mm bore diameter, 358mm overall height (furnace only) Three-zone split furnace configuration with durable embedded heating elements 1000 °C (1832 ...
Maximum temperature: 1,200 °C
The Instron 3119-160 is a 3 Zone Split Tube Furnace with a side entry extensometer port. It is manufactured with a wire-wound element for maximum operation up to 1200°C (2200°F). The elements are uniquely formed to provide optimum temperature uniformity, ...
Maximum temperature: 30 °C - 300 °C
Heating ovens are heating devices of varying dimensions depending on the needs of a project. A thermal fluid boiler heats the radiators arranged inside the oven. The thermal insulation system of high density rockwool enables a system efficiency of 100%. ...
Both raw oats and oat kernels can be treated using the Schule kiln. Through direct addition of steam between the prebin and the kiln, heat and moisture are introduced into the product before it enters the kiln. As it passes through the kiln, it comes ...
... Indispensable in the production of flakes : The SCHULE moistening and heating screw ideally prepares cereals and legumes for the kiln-drying and flaking process Flaking, Hydrothermal treatment Oats, Rice, Spelt, Buckwheat, Wheat, Rye, Barley, Quinoa, ...
Maximum temperature: 1,000 °C
Width: 40 mm
... This smaller benchtop horizontal tube furnace of non-split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter 50 mm. The tube chamber opening is on ...
Maximum temperature: 1,000 °C
Width: 80 mm
This larger benchtop horizontal tube furnace of split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter 100 mm. The split-type design reduces tube cooling ...
Maximum temperature: 10 °C - 300 °C
... Good Quality LED Digit Display Laboratory Drying Oven For Drying Test Sample Drying oven is used to dry, bake, melt and sterilize test sample, widely used in industrial and mining enterprises, laboratory, research institute, inspection agency, college ...
Maximum temperature: 10 °C - 200 °C
Width: 300 mm
Height: 350 mm
... DHG-9030A drying oven is used for drying, baking, wax melting and sterilization in industrial and mining enterprises, laboratories, scientific research institutions, testing institutions, colleges and universities, etc. The inner wall adopts high-quality ...
Maximum temperature: 600 °C
Capacity: 20 ml - 2,000 ml
Width: 1.5 m - 4.8 m
... High Quality Electric LPG Furnace Tempering Furnace Casting Annealing Furnace for Glass bottles glassware
Annealing Furnace for Glassware
Customizable Solutions for Bottles, Cups & More
Overview
Our ...
Maximum temperature: 0 °C - 300 °C
Width: 85 cm - 155 cm
Height: 52 cm - 120 cm
... Industrial Oven for Silicone Rubber Post-Curing & Drying
Overview
This industrial oven is designed for the precise post-curing, drying, and shape-setting of various silicone rubber products. It ensures consistent, ...
Maximum temperature: 10 °C - 250 °C
Width: 120 cm - 150 cm
Height: 600 cm - 850 cm
... Precision Industrial Drying & Sterilization Oven
Product Overview
This precision industrial oven is engineered for demanding thermal processing applications across multiple high-tech and regulated industries. ...
Maximum temperature: 0 °C - 120 °C
Capacity: 7 l
Width: 620 mm
... Dental articulators or several flasks in a flask press can be polymerised simultanteously. Pressure, time and curing temperature are adjustible. The heating outside the stainless steel tank is free from wear and grants durability, facilitating cleaning ...
Maximum temperature: 0 °C - 1,150 °C
Capacity: 3.2, 5.2, 9.2 l
Width: 165 cm - 450 cm
... The laboratory furnaces of the RETOMAT series are specially designed for the precious metal and model casting technique. The RETOMAT MINI has a chamber size of 3.2 l. With the controller, you make the decision between a COMFORT controller and an EASY ...
Maximum temperature: 1,150 °C
Capacity: 5.2, 9.2, 3.2 l
Width: 165 mm - 450 mm
... Description
The RETOMAT series laboratory furnaces are engineered for precious metal and model casting applications. The RETOMAT MINI is offered with chamber volumes of 3.2 l or 4.5 l. Users can choose between the COMFORT controller for precise ...
Maximum temperature: 500 °C
... Polymerization oven The polymerization ovens are designed for continuous cooking of thermoset rubber or silicone. Characteristics : - built by one meter length elements, the oven can be equipped with an infeed belt conveyor made of stainless ...
Maximum temperature: 300 °C - 1,200 °C
Product OverviewYUNYI YG Series Horizontal Thermocouple Calibration Furnace is a high-precision temperature field device specifically designed for thermocouple calibration. It is primarily used for the verification and calibration of base metal thermocouples ...
Maximum temperature: 10 °C - 300 °C
Width: 45 cm
Height: 50 cm
... Application
This oven is designed to evaluate thermal behaviour and pre/post-heating characteristics of wire and cable insulations and coated rubber specimens. Suitable for testing wire, leather, plastics, rubber, textiles and similar materials. ...
Maximum temperature: 200 °C
Capacity: 90 l
Width: 61 cm
... Features
- Resistance-type silicon-tube pressure sensor; vacuum degree adjustable from 100 Pa to atmospheric pressure.
- Vacuum sensor provides direct vacuum measurement with stable performance.
- Power supply: AC 220V ±10% 50Hz.
Maximum temperature: 100 °C - 1,100 °C
Width: 30 cm
Depth: 45 cm
1.Cylinder structure is adopted for high temperature furnace, heating resistance wire, resistance wire distribution is reasonable, to ensure that the furnace temperature gradient and volatility resistance wire adopts three control mode, respectively Furnace ...
Maximum temperature: 1,400 °C
... It is widely used in research and small-scale production of enterprises and institutions, as well as in ceramics, metallurgy, electronics, glass, chemicals, machinery, refractory materials, new materials development, special materials, building materials. Technology ...
Maximum temperature: 800, 1,000 °C
... Vacuum Annealing Furnace is suitable for heating and annealing soft magnetic materials in high temperature, high vacuum and strong magnetic field environments. The vacuum annealing furnace is a feedback-regulated heating system composed of a high-temperature ...
The Drying oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various materials such as glass, ceramics, plastics, ...
SONACME Technology
The Battery Lab Oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various materials such as glass, ceramics, ...
SONACME Technology
The Drying oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various materials such as glass, ceramics, plastics, ...
SONACME Technology
Maximum temperature: 200 °C
Width: 1,050 mm
Height: 1,400 mm
Precision oven, suitable for baking chemical gases and food processing industry to bake goods, substrate stress removal, ink curing, paint film drying. Widely used in electronics, motors, communications, electroplating, plastics, hardware chemical, food, ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Maximum temperature: 10 °C - 250 °C
Width: 600, 550, 800, 450 mm
Height: 450, 750, 550, 1,000 mm
Precision oven, suitable for baking chemical gases and food processing industry to bake goods, substrate stress removal, ink curing, paint film drying. Widely used in electronics, motors, communications, electroplating, plastics, hardware chemical, food, ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Maximum temperature: 400 °C
Width: 800 mm - 2,500 mm
Height: 800 mm - 3,500 mm
The trolley oven is also called the trolley oven. This equipment is equipped with a platform trolley made of channel steel welding, and the product is directly placed on the plane of the trolley well-shaped frame. There are 2 grooves on the bottom of ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Capacity: 0.9 l
Width: 200 mm
Height: 150 mm
... The FC oven is designed for precise and uniform decarboxylation of cannabis, essential for therapeutic oils and galenic preparations. Ideal for pharmacies and laboratories, it combines compactness, ease of use and optimal performance. Thanks to the ...
Maximum temperature: 200 °C - 900 °C
... High Temperature Furnace for Tensile Test The high temperature test furnace adopts cylinder open structure, which is composed of test furnace, temperature controller. For the temperature controller, it adopts the PID fuzzy control, test temperature ...
Maximum temperature: 220 °C
Width: 2,000 mm
Height: 2,000 mm
Powder coating ovens are convection ovens that allow electrostatic powder coated work pieces to be hardened typically at around 200°C in 10 minutes. The ovens are designed according to the shape, quantity and weight of the product to be dried. Electricity, ...
Maximum temperature: 200 °C
The KK1 crystal oven and TK2 external thermocontroller form an optimal set for precise nonlinear crystal temperature control up to 200°C. This system is designed for a wide range of nonlinear crystals, including KTP, LBO, CLBO, BBO, KDP, DKDP, and LiNbO3, ...
EKSPLA
Maximum temperature: 30 °C - 200 °C
Capacity: 31 l
Width: 630 mm
... The Asynt 31 L Vacuum Oven offers great performance with a compact footprint. Suitable for temperatures up to 200 °C, these vacuum ovens enable heat sensitive materials to be dried at low temperatures or alternatively, enable more stable samples to ...
Asynt