Other motors and accessories

Synchron 600 Series, K mount, AC timing motors offer all of the features of our C mount unit but the deeper gearbox allows more room for gearing so that we can achieve those extra slow speeds. The K mount unit can be geared down to a speed of 1 revolution ...

Power: 1.1 kW - 15 kW
Intensity: 2.8 A - 22.7 A
Torque: 6.34 Nm - 72.7 Nm

The AC motors for high pressure pumps are motors with hollow or solid shaft. The range has been developed to be selected in combination with the most popular high pressure pumps brands, worldwide. The motors are in B3 with flange B14 to be directly coupled ...

Power: 4,000 kW - 40,000 kW
Rotational speed: 8,000 rpm

... Jeumont Electric manufactures two-pole motors for use with variable speed drives up to 8,000 rpm and rated power from 4 MW to 40 MW and low-speed motors. Our permanent magnet propulsion motors offer a smaller form factor, enhanced performance, and ...

Power: 1.5 kW - 7.5 kW

WIND TURBINE YAW MOTOR The pitch motor in variable pitch control mechanism, can be adjusted separately for each blade. The inner gear ring gear and the paddle wheel is engaged, directly controls the blade pitch angle. Displacement sensor to collect the ...

... Mechanical ¨ Low adjustable starting torque ¨ Reduced cost of drive components Conveyor belts ¨ Falling over, banging or slipping of products, parcels etc. is eliminated Electrical ¨ Reduced starting current (with SM, SM2X, SM2 only) Applications ¨ Conveyor ...

Merkle-Korff offers our Brushless DC gearmotors with either hall only feedback or a fully integrated control board, internal to the motor. The integral control is a fully digital control with the latest in micro-processor technology on board. The motor ...

Power: 18 kW
Torque: 55 Nm
Operating temperature: -40 °C - 120 °C

The 48 V transmission-integrated eDrive consists of an integrated motor and transmission-attached power electronics. The system is characterized by its very high power density. It enables pure electric launch, advanced boosting and torque assistance in ...

... VRAD Products can Function as Torque Motors ScannerMAX VRAD actuators may perform well in the role of a limited-angle torque motor. Torque motors, (sometimes called torquer motors, or simply torquers) are a special class of motor, that are designed to ...

Power: 0.06 ch - 1 ch
Rotational speed: 770 rpm - 1,380 rpm

The Vostermans Ventilation Mf-Flex is an extremely flexible motorline complete with a wide application field. The unit is available around the world in most of the following technical combinations: 4-poles to 8-poles, 1/16HP to 1HP, 50 Hz to 60 Hz, using ...

Power: 250, 150, 400 W
Intensity: 9, 14, 11 A
Torque: 0.63 Nm - 2 Nm

... KERN MOTORS High precision propulsion We are dealing with electric motors since over 75 years. We have thereby specialised in precision drives. Be it AC or DC servo motors, brush-operated or brushless drives, a Kern motor is always designed to be especially ...

... Add a wireless network to your robot or other training equipment. • Device mobility • Magnetic mounting or permanent installation using provided mounting ears with holes • Expansion for any FANUC robot or APT equipment • Daisy chain ...

Power: 5.5 kW
Intensity: 11.8 A
Rotational speed: 973 rpm

... • According to standards: IEC 60034 • Insulation: Class F with class B temperature rise • Mounting: B3 - Available B5, B14, B34, B35, V1 on request • Fan: Bi-directional fan • Drive Suitability: Suitable for DOL and VFD • Thermistors: PTC included ...

Power: 0.4 kW - 19 kW
Torque: 3 Nm - 293 Nm
Rotational speed: 4,500 rpm - 6,000 rpm

After more than ten years of experience, PMAC motors are now in their third generation; they stand out thanks to their excellent power-weight ratio and their very high levels of efficiency, while maintaining the unwavering flexibility typical of CFR's ...

Rotational speed: 350 rpm
Diameter: 37 mm

... Model: ZYT37W-CS-011 No load speed: 450+/-10%rpm No load current: 0.2A Max Rated torque: 0.4kgf.cm Rated speed: 350+/-10%rpm Rated current: 0.8A Max Gear ratio: 10:1 RoHS compliance Appliation: Hand Free Electronic Paper Towel Dispenser ...

Power: 94.07 W
Intensity: 4.2 A
Torque: 3 Nm

This NEMA motor satisfies any requirement. As a cloosed-loop stepper motor with 2 phases, it turns 1.8° per step and ensures steady movement and an optimum holding torque of 3 Nm. The feedback loop allows the motor driver to recognize and to ensure that ...

Pump starters prolong the life of your pumps and other pump components that otherwise may be prematurely aged or damaged. Pump starters are primarily intended for use in temporary installations for drainage pumps and are capable of starting one pump at ...

... 8 Double Pole or Double EoL Inputs 4 Transistor Outputs Expand your systems potential PCX-RIX8+ allows you to add an additional 8 inputs and 4 outputs to your wired or hybrid system. The polycarbonate case comes with tamper protection. RS485 ...

Power: 45 W - 1,500 W

A range of direct-current motors with power, reliability and durability features. Using only top-quality materials, PENTA is ideal for variable-speed handling applications. Available with a wide range of windings, as well as different mechanical configurations ...

Gear ratio: 4 unit - 4,096 unit
Operating temperature: -10 °C - 60 °C

PGM-12 is a high-quality series of Ø12mm brushed planetary gear motors designed for various applications. This gear motor offers reliable performance and efficient power transmission. Its compact size and lightweight design make it suitable for use in ...

Gear ratio: 3.5 unit - 240 unit
Operating temperature: 0 °C - 100 °C

... The CRM serie geared engine reducers are characterized by the position of both coaxial input and output shafts and are made up of two or three helical gearsets. Their main particularity, is their great compactness and silence when working. The quality ...

... Module of a double stabilized power supply, assigned to supply the bus as well as sensors. bus power supply 5 VDC/1 A sensors excitation 24 VDC/1 A width - 72 mm power supply 100…250 V AC/DC ...

Power: 400 W
Intensity: 2.8 A - 9.8 A
Torque: 1.27 Nm - 3.81 Nm

Electric servomotor/Servo-drive/AC servomotor/Performance servomotor/Cutting machine with servo-motor/Fieldbus servo-drive/Brushless servomotor/AC servo-drive/Compact servomotor

... The foundation of Nippon Pulse Motor, the tin-can rotary stepper motor (PF series) is our most recognizable product. An innovator in the motion control industry, Nippon Pulse has been manufacturing the rotary stepper motor since 1965. Product Features ...

... Central I/O expansion module for the SMXcompact base modules 12 safe digital inputs 10 digital I/Os 2 auxiliary/pulse outputs Safety compact control suitable up to PL e (EN ISO 13849-1) or SIL3 (IEC 61508) ...