Power: 63 W - 500 W
Intensity: 5 A - 95 A
Torque: 0.22 Nm - 70 Nm
... High performance gears Many DC geared motors are designed to reduce speed and are not suitable for transmitting high torque. tendo®-PM motors reliably transmit any torque possible based on motor power and gear ratio and run very quietly: ✓ generous ...
Power: 5.5 kW
... Numerous variants available on request Degree of protection: IP54 Benefits These compact, ergonomically designed starters can be wall-mounted or located remotely on a machine. Applications All machines requiring: DOL motor starting or ...
Schneider Electric
Power: 5.5 kW
... Enclosed direct-on-line starters for use on AS-Interface line up to 5,5kW/400V. Degree of protection: IP54 Features Non-reversing or reversing DOL starters up to 5,5kW/400V Numerous variants available on request Degree of protection: ...
Power: 0.2 kW - 12.2 kW
Torque: 85, 107, 150, 240 Nm
Rotational speed: 3,000 rpm - 15,000 rpm
... Modular drives The modular drives offer various axis and spindle power modules, as well as power supply units ranging from 22 kW to 125 kW. The modular drives are suitable for machines with up to 13 axes plus a spindle rated up to 40 kW. Their modular ...
Power: 15, 25 W
Operating temperature: -40 °C - 60 °C
... Embraco Air is a highly efficient electronically commutated fan motor. Compact and fantastically flexible, it has multiple fixation possibilities. Moreover, its shaft power ranges from 15 to 25W and the motor can be used with 6" to 10" blades. With ...
... Overview
INA provides optimized electric drive and control combinations for all series of driven linear units. A range of finely graded servo motors and precision planetary gearboxes is available to meet diverse industrial positioning and handling ...
... Overview
Featuring the patented nextSTEP™ rotor/stator mounted at the bottom of the cell, these forced-air flotation cells deliver a more stable froth surface and deeper froth layer to enhance mineral recovery and separation efficiency. The ...
Power: 0.12 kW - 22 kW
Operating temperature: -30 °C - 40 °C
... Super premium efficiency MG motors that match the pump load MG/ML standard motors sold together with our pumps set the standard for energy efficiency, offering premium efficiency designed to match the pump load. Why you should select a Grundfos pump ...
GRUNDFOS
Power: 0 W
... Description Powerful torque motor with absolute encoder and electric and pneumatic rotary feed-through Field of application For all applications with exceptional requirements in terms of achievable repeatability, rotary speed, acceleration and tool ...
Power: 5.5 kW
With a width of just 30 mm you get a compact, powerful motor starter – with five setting ranges up to 5.5 kW. It is part of the SIMATIC ET 200SP distributed I/O system and is available in both standard and safety versions. When starting single-phase and ...
Power: 0.36 kW - 8.38 kW
Torque: 0.44 Nm - 240 Nm
Rotational speed: 2,000 rpm - 7,800 rpm
... Overview
The explosion-proof dynamic brushless Moog ExD servo motor (Explosion Proof Dynamic Brushless Servo Motor) is an AC synchronous motor specifically designed and certified for use in potentially explosive environments. The ExD series ...
Current: 28 A - 1,000 A
Power: 14 kW - 500 kW
XJ01E series motor soft-starter cabinet,is adopting Thyristor AC voltageregualation technology to realize starting and stoping of AC induction motor.Start and stop means that device output voltage raises from 0 up to fullvoltage,and accordingly rasing ...
PEOPLE ELE. APPLIANCE GROUP CO., LTD.
Power: 2,000 kW - 15,000 kW
Rotational speed: 0 rpm - 2,000 rpm
... Overview
- INDAR PMM (Permanent Magnet Motor) high-speed design
- Rated speed: up to 2,000 rpm
- Power range: 2–15 MW
Applications
- Large industrial drives and power generation
- Variable-speed
Ingeteam GmbH
Power: 1.1 kW
Rotational speed: 3,000 rpm - 12,000 rpm
Diameter: 25 mm - 70 mm
... Overview
The VPA-D is an electric motor designed to drive pendular poker vibrators (TNR-D) on construction sites. Three-phase versions include a clutch; motors are double insulated and available in single- and three-phase configurations.
ANR/TNR ...
ENAR
Torque: 0.6, 2.5 Nm
... The new Camozzi motors Series MTS have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The new Series MTS electrical Stepper ...
CAMOZZI AUTOMATION
... Since 1995, ARO has been successfully involved in the concept, design and manufacture of servomotors for resistance welding applications. The results are conclusive: •For application up to 20kN force •Maintenance intervals of our most recent 8-pole ...
... Overview
- Compact servo-driven invert and takeout system for precise parison transfer on blow-moulding machines
- Programmable movement profiles per section and extendable across the whole machine
- Designed for retrofit to
... Overview
- Product: Kitagawa Quinte QTC100 — standard 4th-axis controller for CNC rotary table and axis control
- Single-axis control with high-resolution color display and real-time monitoring
- Interfaces: EtherCAT, external
Power: 0.52 kW - 21.3 kW
Torque: 1.5 Nm - 157 Nm
Rotational speed: 0 rpm - 5,000 rpm
The MPP (MaxPlusPlus) Series is an industry leading high performance servo motor. Utilizing eight-pole segmented lamination technology, along with high grade neodymium magnets, the MPP produces more torque in a shorter package to save space, weight and ...
... Utilising an extensive and proven product range, HepcoMotion provides standard and bespoke system solutions and motion control to suit a wide range of automation requirements. Systems of all shapes and sizes – Utilising HepcoMotion’s extensive product ...
Power: 0.37 W - 2.2 W
Operating temperature: 0 °C - 30 °C
... Canned Motor 4PN(D) Model:4PN(D) The following is about Canned Motor 4PND related 4PND, I hope to help you better understand Canned Motor 4PND. Product Description Canned Motor 4PN(D) Application These motors are appropriate for 4” or larger ...
... 【Main Feature】 FBL80 linear guide, fully sealed structure, body width 80 mm, it is designed for dust proof usage in hard environment, avoid dust or miscellaneous debris fall into body structure to affect working,large stretch,small compression,hard object ...
Power: 200 W - 1,000 W
Rotational speed: 3,000 rpm
... 3000rpm AC Servo Motor with Brake 3000mm Power Lines Optional Encoder Lines 60/80 magnetic braided AC servo motor 17-bit single-turn absolute encoder Air Circuit Breaker It is used to protect the power line and cut off the circuit when an overcurrent ...
... Short description
Bipolar phase-matching controller for 2 - 36 kV.
Application
- Bipolar controllers detect potential differences between any two points in a high-voltage installation.
- Primarily used to locate
Current: 12 A
Power: 3 kW
... • For three-phase induction motors of up to 22 kW / 400 V • Built in heat dissipater and electro-mechanical bypass relay • Substitutes the conventional contactors with a greater operating life. One in direct start-up and three in star-delta start-up. • ...
... KLIXON® SP Refrigeration Package is a compact motor starter and motor protector package. The SP serves as a combination control which: 1. Uses industry leading 4TM motor protector 2. Performs the PTC solid state starter function 3. Replaces ...
Sensata Technologies
Frameless motor part set design from BEI Kimco allows for the motor to be fully integrated within the customer assembly resulting in the highest ratio of torque to volume. In this configuration the motor’s rotor and stator are housed within the customer’s ...
Sensata Technologies
This compact, 1.5” diameter HPHT Brushless DC motor from BEI Kimco is ideal for down-hole applications, such as mud pulser valves. This rugged motor from BEI Kimco has been tested for operation up to 400°F (205°C) and pressures up to 30,000 PSI (2070 ...
Sensata Technologies
Power: 0.15 kW - 4 kW
NEFF’s standard three-phase motors offer a reliable and high-performance drive solution for industrial applications and integration with mechanical motion systems. They enable the efficient operation of machines, systems, and electromechanical positioning ...
Power: 475 W
Intensity: 1.8 A
Torque: 75 Nm
... TORQUE MOTOR iTM 240 -Energy efficient due to low losses✓ -Completely ready for use in a ready-to-install housing✓ -Hollow shafts for feed through✓ FEATURES: -Energy-efficient due to low losses -Completely ready for use in a ready-to-assemble ...
isel Germany
Torque: 0.34 Nm
Rotational speed: 3,000 rpm - 28,000 rpm
... FEATURES • - robust 2-pole AC motor (asynchronous motor) • - square shape • - Protection class IP54, insulation class F • - M23 plug connection • - A side: aluminium extrusion / B side: cast iron end shield • - motor shaft to take ER 16 collets • ...
isel Germany
Power: 900 W
Torque: 0.37 Nm
Rotational speed: 6,000 rpm - 24,000 rpm
... iSA 900W | Spindle motor with automatic tool exchange Features • - robust 2-pole AC motor (asynchronous motor) • - square shape • - protection class IP55, insulation class F • - M23 plug connection • - cast end shield A and B sides • - tool ...
isel Germany
Power: 100 W
Torque: 1.5, 2, 6.2 Nm
Rotational speed: 800, 625, 200 rpm
... Overview
The SM137 is a compact smart motor designed and manufactured by HSD for precision machining and drive integration in industrial applications. The series maintains a constant 40 x 60 mm mechanical envelope while offering multiple output ...
Power: 0.35 kW - 0.45 kW
Torque: 1.11 Nm - 1.43 Nm
Rotational speed: 5,000 rpm
... Overview
HSD-designed SM141 smart motors for industrial machining of metals and other materials. Available in two power variants to suit compact machining equipment where fieldbus integration and optional braking are required.
Compatible ...
... Materials : steel, stainless steel, S45C Surfacing material : wide range [Please contact us for details] Diameter : 2－63 [mm] Length : 5－500 [mm] ...
... Materials : steel, stainless steel Surfacing material : wide range [Please contact us for details] Diameter : 4－14 [mm] Length : 8－80 [mm] ...
... Materials : steel, stainless steel, SUS630 Surfacing material : wide range [Please contact us for details] Diameter : 3－14 [mm] Length : 8－80 [mm] ...
Starting from the MD-CX magnetic drive range Simaco has decided to introduce alongside the asynchronous motors with a very competitive alternative for performance, energy saving, interconnection, dimensions: the Permanent Magnet Synchronous Motors (PMSM). ...
Power: 19 W
Torque: 0.057 Nm
Rotational speed: 3,100 rpm
... Rated Torque 5.7 Ncm No load speed 3800 rpm Weight 490 g Motor Length 80 mm ...
Power: 62 W
Torque: 50 Nm
Rotational speed: 4,000 rpm
Rated Speed 4000 rpm Rated Torque 15 Ncm No load speed 5200 rpm Weight 700 g Motor Length 85 mm Output Power 62 W
Power: 19 W
Torque: 80 Nm
Rotational speed: 3,800 rpm
Rated Speed 3100 rpm Rated Torque 5.7 Ncm No load speed 3800 rpm Weight 490 g Motor Length 80 mm Output Power 19 W
Rotational speed: 125 rpm
... The ViscoPro-Cm is a brushless servo motor for the drive of the ViscoTec dispenser 3RD4-EC, including a high intelligent drive concept. In combination with the 3RD4-EC dispenser a perfect alternative to valves. Your advantages: - weight with ViscoTec ...
Rotational speed: 125 rpm
... The ViscoPro-Cg is a brushless servo motor for the drive of the ViscoTec dispenser series RD-EC: 3VMP15, 3VMP18 and 3VMP22, including a high intelligent drive concept. In combination with one of those dispensers a perfect alternative to valves. Your ...
Torque: 0.2 Nm - 45 Nm
... Category: AUTOMATIC ASSEMBLY MACHINE / Screw Driving motors Product: NX DRIVER (SD600T series) Catchphrase: AC Servo Screw Driving motor with Torque Sensor Description: SD600T series AC Servo Screw Driving motor with Torque Sensor NX Driver. New High ...
Diameter: 100 mm - 400 mm
... "TR" polyurethane wheels, cast iron centre Wheel description "TR" polyurethane wheels, cast iron centre. These wheels can also be used as drive wheels: the wheel hub is manufactured so that it can be easily reworked to achieve a splin or a key housing. ...
Diameter: 230 mm - 250 mm
... TR-PowerHigh polyurethane wheels high thickness, aluminium centre, swivel top plate bracket PT with brake Wheel description TR-PowerHigh polyurethane tread, high thickness; hardness 92+/-3 Shore A. Aluminium centre. The housing is obtained by moulding ...
... Carbon brushes and brush holders are one of the fundamental parts in the operation of electric motors and electromagnetic clutches. They can be defined as the element that acts as an electrical connection between the fixed and the rotating part. Brush ...
Power: 1.5 kW - 50 kW
Rotational speed: 1,500 rpm
... Bellmarine is a Dutch brand and leader for many years in electric marine propulsion, and more besides. It is consolidated on the European market with over 4000 systems installed in various types of applications. The new company, Transfluid North Europe ...
Power: 4 kW - 200 kW
Rotational speed: 0 rpm - 3,000 rpm
Diameter: 278, 360, 240 mm
TRANSFLUID manufactures three-phase, permanent magnet, synchronous electric machines (PMSM Permanent Magnet Synchronous Machine) with natural convection air cooling for its hybrid modules. This solution ensures high efficiency and simplicity with limited ...
Power: 500 W - 30,000 W
Intensity: 500 A
Torque: 37 Nm
... Robust DC motor for direct power supply from a battery Secondary, series and compound winding versions Direct switching on at the battery possible without inverter Individual / special designs and adjustments possible Options: Attachment of additional ...
... Short Description
Carbon brush blocks and matched brush holder components designed for hydrogen-cooled turbine generators. Engineered for direct replacement in large generators, they provide stable excitation current transmission and reduced ...
... Short Description
This heavy-duty DC motor brush holder provides stable electrical contact and extended service life as a replacement component for industrial DC motors. The double-hole mounting and copper brush box ensure consistent conductivity, ...
Current: 8.5 A
Power: 3.5 kW
The FEAS-softstarter is an electronic starter for AC-motors of the squirrel cage winding with slip-ring rotor constructional type. The function of a soft starter is to allow AC-motors to accelerate smoothly up to nominal speed, whereby the ohmic resistance ...