Other painting equipment

Pressure: 2 bar - 3 bar

The Surface Treatment Series, manufactured by Prevost®, is a spray gun painting for HVLP and suction, utilized in transfer rate of a material with controlled flow of the paint. In addition, it is designed in an aluminum material, ideal ...

Pressure: 3.5 bar - 5 bar

This 1.6 to 2 mm spray painting gun equipped with suction mechanism is specially designed for painting and automotive applications. It is fabricated from anodized aluminum blue and is available with a wide range of nozzles fabricated ...

Pressure: 22 bar

ASCO Vacuum Insulated CO2 Storage Tanks include a high quality perlite vacuum insulation. These CO2 storage tanks are available as horizontal or vertical storage versions and are constructed in various standard sizes. ASCO CO2 storage ...

Pressure: 22 bar

ASCO supplies different sizes of transportable (demountable) CO2 tanks which can be mounted on any suitable truck or trailer of the rigid flat type. Transportable tanks are a cost saving alternative to conventional road tankers as ...

High-End Bohle Coater The high-end version of the Bohle coater designed specifically for high speed, problem-free coating, providing unparalleled tablet uniformity and efficiences. A high containment execution is also available. ...

Laboratory Coater – BFC 5 The coating of tablets is a combination of spraying, mixing and drying. All three processes must run simultaneously using the correct settings in order to achieve optimal coating uniformity. For years, L.B. ...

Bohle Film Coater BFC TriPan TriPan is a Bohle Film Coater with a suspension supply via a single pump head.TriPan can be operated with three pans for batch sizes of 7 to 75 liters. TriPan can be operated with three pans for batch ...

Push-Pull ventilation system is an outlet and inlet system where the pipes are mounted opposite each other and which is connected to a suction and filter system. The system is suitable for workshops with low to medium levels of smoke ...

The displacement ventilation piping system is connected to a central extraction and filter system. It is suitable for workshops with medium to high levels of smoke and dust where a spot extractor system is not feasible or it is used to ...

SIPL with its long exposure to industry and extrusion coating & laminating expertise can today deliver the most versatile and cost-effective extrusion coating solutions to the most demanding flexible packaging (PP/HDPE woven fabric/bags), ...

The Elcometer Fineness of Grind Gauges are used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products. These two channel gauges, are ...

This single channel precision grind gauge is used to determine particle size and fineness of grind for many materials including paints, pigments, inks, coatings, chocolates and other similar products. Manufactured out of hardened stainless ...

This precision grindometer is used to determine particle size and the fineness of grind of particles in printing inks according the National Printing Inks Research Institute (NPIRI) scale. As ink particles are so fine the two grooves ...

NESTRO fresh air systems are equipped with all necessary air duct units and air outlets over the working areas. Warm water, oil, gas and power supply can be used as heating systems. Infinitely variable control systems allow an economical ...

Capacity: 1,200 m³
Pressure: 0.3 Pa

We have been focused on the research, development and production of extraction tank used in the industrial since 1997. Combined with the characteristics of German E&E extraction tank, we redesigned and developed a new generation of ...

Design philosophy: Equipment performance optimization, good operability, energy saving and environmental protection, overall beautiful. Component: The equipment is made up with tank, defoamer,condenser, cooler, oil-water separator, ...

Capacity: 1,000 m³

Design philosophy: Equipment performance optimization, good operability, energy saving and environmental protection, overall beautiful. Component: The equipment is made up with tank, defoamer,condenser, cooler, oil-water separator, ...

NW are modular windows made of aluminum and polycarbonate. They allow to maintain the correct air exchange in industrial and agro-livestock buildings thanks to the principle of natural ventilation. They are easily adjustable thanks ...

Capacity: 6,000 l

TIANTAI fermentation tanks (fermenters/fermentors) are tanks with a tori spherical top, cylindrical body, and a conical bottom, and are insulated, with cooling jackets over the cylindrical body and the bottom. In most cases, these tanks ...

Capacity: 11,129 l

TIANTAI fermentation tanks (fermenters/fermentors) are tanks with a tori spherical top, cylindrical body, and a conical bottom, and are insulated, with cooling jackets over the cylindrical body and the bottom. In most cases, these tanks ...

Short- distance painting With specific structure of the nozzle tip, PD and PAD are applicable to short-distance painting, which enable high atomization and low spattering performance with a small paint spraying volume and small air consumption, ...

Highly efficient machine for the dip coating of products for the medical and pharmaceutical industries. In the first process phase, the products are dipped into a liquid solution contained inside a tank. The second process phase involves ...

Ophthalmic lenses cleaning and dip coating machine. The machine is composed of a TERMOVIDE cleaning section and a dip coating section followed by a pre-curing oven APPLICATION SECTORS optics (lenses, sun lenses etc.) The coating ...

Machine for cleaning, dip coating and curing of sun lenses, stock ophthalmic lenses and visors. The machine is composed of a PLURITANK ultrasonic cleaning section and a dip coating section followed by a feed-through curing oven. APPLICATION ...

• The XENA-IV BTC is a fully integrated, recipe-driven R&D scale tablet coating system with exchangeable drums. • More than just a film coater. It is a practical and highly functional coating platform for many processes, including ...

Product Introduction 1. The glue pressing head is a floating soft connection, vertical movement, automatic guidance, and glue cylinder The force around the piston is uniform, which overcomes the defect of easy wear at the bottom of ...

Capacity: 1, 3, 5, 10 gal

Valco Melton’s Adhesive Supply Pressure Tanks regulate fluid pressure for exact application. System pressure is easily modified to fulfill an extensive range of gluing applications. Stainless steel pressurized tanks are available in 1, ...

Pressure: 0 bar - 6 bar

Valco Melton's new MITO applicators are engineered to allow simultaneous application of different adhesive patterns on the same substrate with only one applicator head. MITO applicators are available in metering and pressure-fed configurations ...

FLEXSPRAY„� ADHESIVE GUNS Spray Dispensing Applicator with Integrated Air Heater The Valco Melton FlexSpray Gun Series is a cost-effective solution that provides highly accurate adhesive application and reduces initial investment ...

Aluminium Anodizing Monti Engineering produces aluminum anodizing plants. Through a close interface with its customers, it designs and supplies customized solutions, automatic systems of the latest generation, simple to handle and designed ...

Monti Engineering produces aluminum anodizing plants. Through a close interface with its customers, it designs and supplies customized solutions, automatic systems of the latest generation, simple to handle and designed to meet the most ...

The AP 6.1 is the perfect solution to prepare your vehicles before entering the paint booth. It is fit for small body workshops offering up to 30.000 m3/h of airflow. The preparation area is a key element of the Lagos Quick Repair Concept ...

Dip Pre-Treatment Lines Dip pre-treatment systems are mostly preferred for manual and semi-automatic system use, where work piece quantities are low and not standard geometries. At the same time, this method provides an advantage for ...

Coater System The coaters series type LC were specifically developed for coating tablets. With our coater range, Loedige is one off the technological market leader. The maximised tablet bed surface in the Lödige coater and the ...

Coater-System (Lab machine) The Lödige laboratory tablet coater has a modular design, so that integration of any components is customised according to the customer’s specific requirements. A dividable drum and a dividable nozzle ...

Knife disinfection tank with electrical resistance, with and without overflow. Features: Capacity for 12 knives. Disinfection system by heating the water up to 82°C. DT30 and DT30R To be fitted to HW11 washbasins. DT31 and DT31R ...

Knife disinfection tank with electrical resistance. Features: 2000 W electric heater with thermostat. Constant level, insulation and disinfection of handles included. Capacity for 70 knives, 2 axes.

Capacity: 800, 500 l

Cutter tank for 500 and 800L capacity elevator. Made of stainless-steel AISI-304. With 4 legs. With hook for forklift.

Pressure: -1 bar - 0.5 bar
Flow: 0 l/min - 20 l/min
Orifice diameter: 1.2 mm

Closed loop vacuum or pressure regulator with flow indication and programmable PID parameters. I to P converter. Ideal for low precision regulation such as control of piston, membrane, positionning.

Capacity: 100 l
Pressure: 2.5 bar

FLOW-PILOT 100 regulator (medium-sized and large volumes) The FLOW-PILOT 100 regulator is the solution for optimizing level management under nitrogen pressure during filling operations. Installed between your filtration pallet (or ...

Pressure: 8 bar - 250 bar

Easy adjustment of the material discharge Fatigue-free use due to optimal working ergonomics Uncomplicated conversion from manual to automatic gun by means of adapter The perfect match for the optimal processing of PUR ...

The advantages of such lines are having a small footprint, full penetration of the material with the chemical and low investment costs. These are applications for coating the material to be painted by dipping it into a container or tank ...

Paint Preparation Room Pump, dosage and color block groups feeding the spray guns in liquid paint facilities should be located in separate rooms. This room is also protected against environmental pollution and fire hazards. Due to ...

Dipping-type coating methods are provided by OKM-D series. Especially for intricate surface parts with the help of this process whole surface are able to coat. OKM-D series is designed for fast and compact applications to apply chemosil ...