12VDC torque sensors

Torque: 0.1 Nm - 13,000 Nm
Overload limit: 400 %

... cost-effective torque measurement solution with excellent overrange and overload capabilities. Other Features BIT Self-diagnostics – Diagnostic system checks internal systems and operational conditions for faults, and monitors torque, ...

Torque: 0.1 Nm - 13,000 Nm
Precision: 0.05 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.1 Nm - 13,000 Nm
Precision: 0.05 %
Overload limit: 400 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.18 Nm - 265 Nm
Overload limit: 400 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.18 Nm - 265 Nm
Overload limit: 400 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.18 Nm - 265 Nm
Overload limit: 400 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.18 Nm - 265 Nm
Precision: 0.05 %
Overload limit: 0 % - 500 %

... operational conditions for faults, and monitors torque, speed and temperature for overscale conditions. Transducer status LED and simple “ Sensor status” output pin, provides transducer health feedback. Sensors ...

Torque: 0.1 Nm - 100 Nm
Precision: 0.1 %
Overload limit: 400 %

... zero variation in torque signal with rotation

• Model: SGR523 (torque

Torque: 0 Nm - 2,000 Nm
Precision: 0.1 %
Overload limit: 400 %

...

• Model: SGR571
• Maximum

Torque: 0.1 Nm - 13,000 Nm
Overload limit: 400 %

... cost-effective torque measurement solution with excellent overrange and overload capabilities. Other Features BIT Self-diagnostics – Diagnostic system checks internal systems and operational conditions for faults, and monitors torque, ...

Torque: 50 Nm - 400 Nm
Precision: 0.1 %

... Overview
The measurement steering wheel is a torque sensor assembly designed to measure steering torque directly at the vehicle steering wheel. It enables direct measurement of steering torque, ...

Torque: 0 Nm - 5,000 Nm
Precision: 0.1 %
Rotational speed: 0 rpm - 36,000 rpm

... 2-range- torque transducer "DRDL" Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% overload protection 16 ...

Torque: 0 Nm - 1,500 Nm
Precision: 0.1 %
Rotational speed: 0 rpm - 20,000 rpm

... Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection Features: • waterproof (IP67) • contactless • integral torque amplifier • single supply voltage • wide range of application • ...

Torque: 0 Nm - 10,000 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 12,000 rpm

... and to sense loosening torques, etc. lt can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

... Torque sensor "DRFS ¼" hexagonal drive 7 Measurement range from ± 0 - 1 Nm up to ± 0 - 20 Nm optionally with angle measurement Features: • No service needed because of contactless data acquisition • High accuracy ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

... Torque sensor with quick-change chuck "DRFSk" hexagonal drive very short construction 6 torque range from ± 0 - 2 Nm to ± 0 - 20 Nm rotation angle measurement option Features • No service ...

Torque: 0 Nm - 5 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

... Torque transducer with digital output "DRFDN" / "DRFDS" Particularly suitable for small screwing tools 4 torque range from ± 0 - 0,5 Nm to ± 0 - 5 Nm digital output Features Square drive or hexagon ...

Torque: 0 Nm - 6,000 Nm
Precision: 0.1 %
Overload limit: 50 % - 100 %

... Reaction torque transducer "DRT" 16 Measureing range between ± 0 - 2 Nm to± 0 - 6000 Nm • for static use • active and passive execution • optionally with bracket Features • Pulse screwdriver suitable.  ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Overload limit: 500 %

... Torque transducer for static applications "DRB-II" 3 torque ranges from ± 0 - 5 Nm to ± 0 - 20 Nm • Not impacted by axial and radial forces • Extremely rugged construction • Optionally ...

Torque: 0 Nm - 20,000 Nm
Precision: 0.15 %
Overload limit: 50 %

... device chain. This non-rotating torque transducer is suitable for checking different types of screwing tools or for use as a reference transducer in test benches. It is a low-cost alternative to the rotating torque ...