Asynchronous motors

Power: 0.55 kW - 1.11 kW

... high-performance 3-phase asynchronous motors of the HQL - HQLa Sincrovert® series offer the best performance and the latest innovative technology, thanks to many years of experience in the variable speed electric motors ...

Power: 500 kW

... Technical features We supply internally and surface-ventilated low-voltage cage induction machines in standard and special designs. General Data IP23 and IP 55 - Efficiency class IE2 Frame size 63 to 560 Degree of protection from ...

... key technologies of the motor; Unique design, low starting pressure of motor, small pressure impact when switching between high and low speed, and superior performance to similar products of competitors; Optimize ...

Power: 75 ch - 300 ch
Torque: 325.191 ft.lb - 842.296 ft.lb
Rotational speed: 1,200, 1,800 rpm

... Crusher Duty Key Description - Key Description Standard Features - NEMA Premium Efficiency Design "C" - 6 Lead - 460V - Drive-end Roller Bearings - Oversized Bearings on DE & ODE - 1.15 Service Factor - 40°C Ambient Temperature Rating - All Position ...

Power: 0.09 kW - 3 kW

... Permanent Capacitor Motors are dual phase winding asynchronous motors. Compared to motors with starting capacitor of the same frame size, these motors provide a one step ...

Power: 0.09 kW - 2.2 kW
Rotational speed: 920 rpm - 2,850 rpm

... ORANGE1 single phase motors are manufactured upon customer’s request following the standards indicated in the downloadable brochure. The standard configuration (STD) of single phase motors includes a run capacitor permanently ...

Power: 0.18, 0.12, 0.25 kW
Torque: 0.62, 0.8, 0.82, 1.24 Nm
Rotational speed: 1,420 rpm - 3,000 rpm

... 1 phase asynchronous motors with start and run capacitor of Volt Electric are preferred for general electric motors applications especially in the following machines ...

Power: 0.8 kW - 120 kW
Rotational speed: 500 rpm - 5,000 rpm

... plants with a direct current drive - Test rigs with asynchronous motors as drive or load-testing machines - Test rigs with asynchronous generators as load-testing machines ...

Power: 180 W - 3,000 W
Torque: 1.2 Nm - 19.5 Nm
Rotational speed: 1,400 rpm - 1,410 rpm

Squirrel cage rotor - Totally enclosed fan cooled IP55 - Ins.cl.F - 230V 50Hz

Power: 0.12 kW - 315 kW
Rotational speed: 3,000, 750, 1,500, 1,000 rpm

... When used in hazardous areas, motors with properties adapted to the environment are required. We offer both explosion-proof and flameproof motors. ...

Power: 186, 50, 75, 200 W
Torque: 0.121 ft.lb - 0.629 ft.lb
Rotational speed: 1,370 rpm - 3,200 rpm

... TelcoMotion’s Custom AC motor are designed to be your best motor for efficient and low noise applications. Frame size of 3.11”, 3.42”, and, 3.86” are available, and the Max output power can be achieved is 1/4HP. Telco's ...

Power: 21 kW - 420 kW
Intensity: 42 A - 700 A
Torque: 65 Nm - 1,340 Nm

... • IEC axle heights 100-225 • Cooling type IC06 with open circuit circulation • Compact design • Very long service life • Large field weakening range • Low maintenance (brush-free) • High degree of effectiveness Therefore FAURNDAU • Assistance ...

Power: 1.1 kW - 15 kW
Intensity: 2.8 A - 22.7 A
Torque: 6.34 Nm - 72.7 Nm

... The AC motors for high pressure pumps are motors with hollow or solid shaft. The range has been developed to be selected in combination with the most popular high pressure pumps brands, worldwide. The motors ...

Power: 1.5 kW - 7.5 kW

... Displacement sensor to collect the blade pitch angle changes and the formation of PID motor closed-loop negative feedback control. WIND TURBINE YAW MOTOR The pitch motor in variable pitch control mechanism, ...

Power: 60 W - 335,000 W
Rotational speed: 750 rpm - 3,000 rpm

Power: 0.06 ch - 1 ch
Rotational speed: 770 rpm - 1,380 rpm

... between 1,00 and 1,40. The Mf-Flex motor is a TEAO motor (Totally Enclosed Air-Over motor) and has an aluminum extrusion profile. To achieve proper cooling, the motor needs to be mounted ...

Power: 5.5 kW
Intensity: 11.8 A
Rotational speed: 973 rpm

... F with class B temperature rise • Mounting: B3 - Available B5, B14, B34, B35, V1 on request • Fan: Bi-directional fan • Drive Suitability: Suitable for DOL and VFD • Thermistors: PTC included as standard for VFD applications • Paint: ...

Power: 0.1 kW - 30 kW
Torque: 2 Nm - 810 Nm
Rotational speed: 600 rpm - 6,000 rpm

... traction, steering or hydraulic systems and designed for low and high voltage. •AM: three-phase asynchronous motor with iron casing •AME: three-phase asynchronous motor ...

Power: 0.75 kW - 22 kW
Torque: 2.06 Nm - 71.3 Nm
Rotational speed: 2,880 rpm - 3,560 rpm

... temperature: -15°C / +40°C Voltages/Frequency - 208-230λλ/460λ V Motors (2 poles) IEC 80÷160 Rated operation 208-230λλ/460λ V – 60 Hz x Pn 200λλ/400λ V – 50 Hz x Pn - 330∆/575λ V Motors (2 poles) IEC 80÷160 ...

Power: 0.75 kW - 22 kW
Rotational speed: 3,000, 1,500, 1,000 rpm

... YE2 series 3 phase AC asynchronous motors (induction motors) adopts IEC standards, IE2 energy efficiency, ABB Motor square design, cast aluminum housing, detachable mounting feet. Dustproof ...

Power: 15 W - 1,000 W

... frameless fan motors in synchronous or asynchronous design that are as small as feasibly possible and as versatile as the customer requirements allow. At a glance haventic compact Fra me less fan drives with synchronous ...

Power: 0.12 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm

... single-phase motors have lower starting torque and are less efficient compared to three-phase motors. Asynchronous motor single phase, operating on a single-phase power supply, comply ...

Power: 0.02 kW - 18.7 kW

... Asyncronous three phase motors * closed * externally ventilated * cage rotor * protection IP 55 * motor frame size from M50- M160 ...

Power: 0.12 kW - 200 kW

... The Y2 series is a line of induction motors manufactured by Chinabase. It is a type of completely enclosed fan-cooled squirrel-cage AC asynchronous motors electric motor. ...

Power: 40 kW - 80 kW
Torque: 100 Nm - 200 Nm
Rotational speed: 6,000 rpm

... can easily switch between 2 branches and 4 branches, and eliminate circulation current between the internal branches of the motor, which are conducive to product serialization. The operating voltage range is 300-800V, rated torque range ...

Power: 0.75 kW - 45 kW
Intensity: 1.8 A - 94.1 A
Rotational speed: 700 rpm - 2,970 rpm

... YT2 series 3 Phase Asynchronous Motors For Axial Flow Fan The YT2 series three-phase asynchronous motor for axial flow fans is a specialized motor designed for axial ...

Operating temperature: -20 °C - 65 °C

... supply - Internal 2.4GHz RF receiver module - Bore diameter: 25.2mm (standard) / 25.6mm - Backup batteries: 9V DC x 1 (standard) / 9V DC x 2 (RF version) ...

Power: 11.1, 19.4 W
Intensity: 75, 66 mA
Torque: 0.007, 0.004 Nm

... Service life: 20,000 hours, S1 duty Insulation mat. class: B, optional F System of protection: IP 40, optional up to IP 65 Special model: Design for short-time duty with high performance Options: Thermal protection, special shafts, special ...

Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C

... 3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • Identical power supply as with previously used single ...

Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C

... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...

Power: 0.12 kW - 22 kW
Rotational speed: 0 rpm - 1,500 rpm

Power: 0.37 kW - 400 kW
Rotational speed: 1,500, 1,000, 3,000, 750 rpm
Diameter: 14 mm - 100 mm

... pump, propulsion, etc. Fail-safe brake 1.5Cn – 2Cn – 2.5Cn – with manual release system Encoder Protection factor for motor + brake IP 56, 66, 68 Reheating Anti-slip Winding thermal protection sensor Underwater housing ...

Power: 2 kW - 100 kW
Rotational speed: 1,000, 2,000, 1,500 rpm

... leading Italian motor manufacturers, is able to supply CNC complete packages, accessory drives and motors including spindle motors. These are special asynchronous motors ...

... EX3M Three-Phase Asynchronous Motor (IE2) is typically used in hazardous locations as a motor for compressors, fans and pumps. It is made with high strength materials and insulation, which assures its ...

Power: 20 W - 300 W

... • High performance asynchronous motors combinable with stainless steel fans • Power output: 20 – 300 W Applications • Professional kitchen ovens ...

Power: 0.09 kW - 900 kW

... Santerno motors comply with the applicable European High Efficiency standards: High Efficiency IE2 and Premium Efficiency IE3 Maine features – External ventilation – Squirrel-cage rotor – Aluminium and cast iron motors – ...

Power: 120 W - 315,000 W
Intensity: 400 mA - 556,000 mA
Rotational speed: 3,000, 1,500, 1,000 rpm

... The ZB2 series motor is a new basic series motor designed on the basis of the Y2 series motor. It has a beautiful appearance, high efficiency, energy saving, insulation class F, and protection class IP54. This ...

Power: 160 kW - 12,000 kW
Intensity: 15 A - 3,200 A
Torque: 500 Nm - 508,000 Nm

... pumps. YKK 355-1120 motor has a shaft mounted inside fan (if any) using the surrounding air for cooling. The motor is so designed that the ingress of rain, snow and airborne particles into the electrical ...

Power: 0.12 kW - 45 kW
Rotational speed: 3,000, 1,000, 1,500 rpm

Power: 0.75 kW - 30 kW

... YT SERIES SPECIAL MOTOR PUMP FEATURES The family belongs to Taiwan SAN YOU pump motor referred SY motor. SY axis motor hollow shaft motor, also called non-axis motor. ...