Axial pumps

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new pump ...

Flow: 0.03 m³/h - 110 m³/h
Pressure: 8, 12 bar
Fluid temperature: 0 °C - 200 °C

... rotary lobe pumps. It sets new standards in pump technology. Initially, the high-tech pump will be available in six sizes with flow rates of up to 110 m³/h. Made for one another: The newly developed ...

Flow: 18 m³/h - 225 m³/h
Pressure: 0 bar - 10 bar
Head: 8.5 m - 305 m

... Vertical Multi Stage Centrifugal Pumps BLTModel:BLTSHIMGE Pump has been committed to technical researches, manufacturing Vertical Multi Stage Centrifugal Pumps, as well as providing first-class Vertical ...

Flow: 0 m³/h - 40,000 m³/h
Head: 0 m - 200 m

... efficiency • Priming problems eliminated. Pump end submerged in liquid • 60 models, with bowls, heads and columns optimised for performance and cost • Wide choice of materials • Diffuser bowls ensure balanced axial ...

Flow: 512, 379, 239 l/min
Pressure: 283, 400, 241, 345 bar
Length: 540, 376 mm

... PVK pump line consists of variable-displacement, open-loop, axial-piston pumps available in two frame sizes and three displacement sizes. Product Details Created with Oilgear’s advanced “hard-on-hard” ...

Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m

... The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...

Flow: 0 m³/h - 114 m³/h
Pressure: 14 bar
Fluid temperature: -51 °C - 230 °C

... The 4124A Series™ internal gear pump is the ideal solution for adhesives, paints & inks, polymers, and more because of the broad range of available designs and other options. Features & Benefits Rugged and reliable, yet economical Widest ...

... The axial flow pump is mainly composed of front and back shell, main body, impeller, guide vane, bearings and motor. The impeller, is installed at the end of the shaft directly, rotates to create pressure. The transformer ...

Flow: 0 m³/h - 540 m³/h
Head: 0 m - 64 m
Power: 1.1 kW - 25.5 kW

... The adjustable axial gap of the MultiStream- pump makes it possible to re-optimize the efficiency in case of abrasion by adjusting only one single screw. This can be done very cost-effective when the maintenance is carried ...

Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW

... efficiency, energy saving, reliable and good suction performance. Guide vane type pump body, compared with pump casing type pump body, the radial force is eliminated to ensure that pump ...

Flow: 0 m³/h - 21 m³/h
Head: 0 m - 370 m
Power: 0.37 kW - 7.5 kW

... 4" submerged sump pump with floating impellers with front shim, suitable for handling water in general and also for horizontal operation. 4" submerged sump pump equipped with a special system of floating impellers ...

Flow: 11 l/min
Pressure: 140 bar
Power: 2.2 kW

... asynchronous (brushless) series MEC continuous service. S1 with thermal protection integrated on the windings. Semi professional axial pump with brass head and three steel pistons ceramic coated. Automatic by-pass valve ...

Flow: 0 l/min - 0.125 l/min
Pressure: 210 bar - 300 bar
Weight: 14.5 kg - 38 kg

... responds quickly to the switching operations between different speeds; there are advanced radial and axial pressure compensation designs inside the pumps, very low pressure loss and pulsation, stable output; high efficiency, ...

Flow: 110 m³/h
Pressure: 12 bar - 20 bar
Fluid temperature: -40 °C - 150 °C

... with low viscosity, so it can be used as a CIP-supply pump.The design ensures full cleanability and drainability. Operation Twin screw pump is a positive displacement pump what means that the pump ...

Flow: 2 m³/h - 800 m³/h
Pressure: 0.6 MPa
Head: 3 m - 50 m

... submersible wastewater pump is a newly developed submersible wastewater pump, which is designed based on the combination of the advanced technology from international submersible wastewater pump performance ...

Flow: 0 us gal/min - 1,180 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 25'00"

... The lightweight S6P is an axial flow pump which has been designed to pump high volumes of water at relatively low heads. The pump has a propeller design which enables ...

Flow: 0 m³/h - 5,000 m³/h
Pressure: 0.2 bar
Power: 1.1 kW - 18.5 kW

... Axial pumps designed to pump large volumes of fluid with low back pressure. The pump is mostly used in wastewater treatment plants for the recirculation of sludge, but may also be used ...

Flow: 0 m³/h - 63 m³/h
Head: 22.5 m
Power: 11, 15 kW

... Vertical semi-submersible electric pump unit, with a single stage centrifugal pump, axial fluid admission and supports out of the pumped fluid. The pump as part of the electrical Pump ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

... The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of its structure allows a long duration ...

Flow: 0.2 m³/h - 30 m³/h
Head: 0 m - 310 m
Power: 0.25 kW - 30 kW

... size. SKC pumps are designed for operation with medium inflow or as a normally sucking pump after prior installation of non-return valve in the suction pipeline and pump and suction system priming (absolutely ...

Flow: 1.2 m³/h - 27 m³/h
Pressure: 8 bar
Head: 10 m - 40 m

... Horizontal End Suction, Stainless Steel Pumps, compact design with closed impellers. Materials : SS304, SS316 Flange : BSP (F) Threaded Applications : Domestic Water Supply ...

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 48, 65 m

... ROUTE centrifugal pumps are made of high-quality thermoplastic polymers. They are available in magnetic and mechanical versions, with the same external dimensions - which is a unique feature offered by ARGAL that eases the pump ...

Flow: 227 m³/h
Pressure: 26 bar
Head: 128 m

... The IPP is a horizontal process pump designed to dimensionally meet the ANSI / ASME B73.1-2001 standard. This versatile pump efficiently handles a wide range of corrosive and non-corrosive liquids varying from water to ...

Flow: 1 m³/h - 2,500 m³/h
Pressure: 0 bar - 40 bar

... contact with each other, but leave a small gap. Impurities in the medium do not cause direct wear (except flushing) on the screw teeth. Except for some small displacement pumps (2w.w4.0 and below). ...

Flow: 0 m³/h - 3,000 m³/h
Pressure: 16, 25 bar
Head: 0 m - 180 m

... maintenance or repair without distorting pump alignment and suction and discharge piping. • Impeller is double suction. • This feature increases pump suction performance in addition it provides the balance of hydraulic ...