Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction ...
Flow: 300 l/h
Pressure: 0.25 bar - 2.5 bar
... PTFE, FKM The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range . The construction and the pump capacity are adapted to the ...
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump ...
Flow: 0 m³/h - 1,800 m³/h
Pressure: 16 bar
Head: 0 m - 160 m
Taking end suction pumps to a new level The Lowara e-NSC end suction pumps combine high efficiency with high flexibility regarding installation, material options and temperature. This make the e-NSC ...
LOWARA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
Flow: 0 l/min - 0.12 l/min
Pressure: 300 mbar - 4,000 mbar
Power: 10 W
... membrane pump,micro water pump,micro liquid pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure. Technical Features: 1.High ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 3, 5 l/min
Pressure: 2.5, 2, 1.5 bar
Head: 30 mm
CMP30W,micro air pumps,vacuum micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Long ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 1 l/min
Pressure: 4 bar
... Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure. Technical Features 1.Uncontaminated flow. 2.Non-metallic ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 40 l/min - 180 l/min
Pressure: 8 bar
Head: 23.3 m - 45.9 m
Two impeller compact centrifugal pump for constructing pressurisation systems for civil and industrial plant: guarantee good ratio between pressure and flow rate.
air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...
Flow: 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... -coupled Self-priming Pumps Spec Type:Other Key Features Features: 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and ...
Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...
Franklin Electric
Crank pump for AdBlue® with PVC hose 3 m and mounting plate Order-number: 11163 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing ...
CEMO
Flow: 30 l/min
Electric pump 12 V, 30 l/min Order-number: 8640 Details Diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due to ...
CEMO
Flow: 35 l/min
Electric pump 230 V, 30 l/min Order-number: 8639 Details NSA diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due ...
CEMO
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 ...
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
VD Type The DELTA VD fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can ...
Flow: 1 m³/h - 66 m³/h
Head: 5.5 m - 68 m
Power: 0.33 kW - 7.5 kW
... multi-stage close coupled pumps in chromenickel stainless steel. Compact and robust construction, without protruding flange and with single-piece lantern bracket and base. Single-piece barrel casing, ...
Calpeda
Flow: 0 us gal/min - 4,000 us gal/min
... a double suction pump that has a vertically split casing perpendicular to the pump shaft. The suction and discharge flanges have been rotated 90 degrees to face up, resulting in an extremely compact, ...
Flow: 0 m³/s - 5 m³/s
Pressure: 0 bar - 16 bar
self-priming pump Type KB-S GG The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within ...
WANGEN Pumpen
Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar
The WANGEN progressing cavity pump type KB-SL Hygienic is a further development of the pump construction series for the food industry. In this area, where there is contact with the product, the stainless ...
WANGEN Pumpen
Flow: 0 m³/h - 150 m³/h
Pressure: 0 bar - 48 bar
... flexibility, low stocking of spare parts, short downtimes for maintenance and repairs compact construction based on modular principle for high flexibility compact design avoids dead space and stagnantion ...
WANGEN Pumpen
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 6 m³/h
Pressure: 10 bar
The Compact pump is based on the “Moineau” progressing cavity pump principle. The Compact cast iron progressing cavity pump is ideal for small ...
PCM
Flow: 3 l/h - 180,000 l/h
Pressure: 0 bar - 16 bar
... Cavity Pump technology with a highly modular, eco-friendly design. The EcoMoineau™ C pump requires less space for installation which reduces costs and facilitates its integration. Eco Design pump 10% ...
PCM
Flow: 8 us gal/h
Head: 43'00"
Length: 3 in
Compact design & higher performing power. High performing Drain safe device Locking power cord Versatile installation options
Sauermann
Flow: 45 l/min
Pressure: 14 bar
Head: 15 m
Compact close-coupled design NEMA 42C face motor, optional power frame available Mechanical seal: 5/8″ Type 21 Fluorocarbon, carbon vs. ceramic standard Type 9 PTFE, Type 21 double seals, silicon carbide faces are among ...
Price Pump
Flow: 0.1 l/min - 16.2 l/min
Pressure: 40 bar - 2,900 bar
... air filter, air pressure regulator, air lubricator, air pressure gauge, air pressure limit valve, pump on/off control, oil pressure gauge. All pumps supplied complete with a full test certificate. ...
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... systems • Temperature-controlled pump heads (-20…+130°C) • Highly flexible due to various control concepts and housing types Specifications Pump type - compact high-pressure dosing ...
Flow: 0 m³/h - 350 m³/h
Head: 1,300 m
Fluid temperature: 120 °C
... ClydeUnion Pumps TWL™ pump is a single wheel steam turbine, two-stage pump, where both the turbine and impellers are mounted on a rigid shaft, supported by a central bearing assembly ...
Flow: 590 m³/h
Fluid temperature: 250 °C
The ClydeUnion Pumps HSP is an advanced pump designed to provide reliability in downhole pumping applications. It features a hydraulic turbine submersible pump, which is particularly ...
Flow: 140 l/min
Head: 14 m
Power: 0.55 kW
... applications) negative pressure tight for vacuum systems no metal parts are in contact with the medium easy to maintain (wear parts can be changed swiftly) universally applicable, quiet and compact The ...
Flow: 280 l/min
Head: 23 m
Power: 0.18 kW - 2.2 kW
In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore ...
Flow: 740 m³/h
Pressure: 0 bar - 16 bar
Head: 90 m
... replacing the motor without disturbing the pump. There is no common shaft for pump and motor, standard motors can be used. The set is a space saving easy to install pump unit. Applications: Volute ...
Flowserve SIHI Pumps
Flow: 140 m³/h
Pressure: 25 bar
Head: 60 m
... motor and pump. The motors used are standard motors. Due to the process design it is possible to withdraw the whole insert unit without detaching the pump casing from the pipe work. Applications: The ...
Flowserve SIHI Pumps
Flow: 35 m³/h
Pressure: 40 bar
Head: 354 m
Pumps of the series AEH according to EN 734 have a segmental type construction with open vane wheel impellers. This pump is available in a normal industrial design with one liquid surrounded slide bearing ...
Flowserve SIHI Pumps
Flow: 0 us gal/min - 2,500 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 380'00"
The e-80 close-coupled, in-line pump is the standard model in Bell & Gossett’s highly efficient Series e-80 product line but this heavy-duty line of pumps is more than a standard line of pumps! ...
Flow: 23 m³/h
Pressure: 2 bar
Head: 20 m
... based on requirement. Features Compact and rigid design Rotary switch for variable speed Compatible to 360 degree installation Application Hot water circulation in domestic and industries Work as heat pump ...
C.R.I. Pumps
Flow: 550 m³/h
Pressure: 550 bar
Head: 95 m
... single stage, end suction centrifugal pumps in which the pump shaft will be directly coupled with standard induction motor by means of stub or split coupling. Close coupled design provides space savings ...
C.R.I. Pumps
Flow: 503 m³/h
Pressure: 10 bar
Head: 96 m
Close coupled, Single stage, top pull out vertical inline pumps are compact and rigid design. Top pull out design facilitates dismantling of motor, motor bracket and impeller without disturbing the casing ...
C.R.I. Pumps
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...
Delimon
Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING TEMPERATURE RANGE ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...
Delimon
Please specify:
Help us improve:
remaining