Flow: 20 l/min
Pressure: 4 bar
Power: 125 W
... "Diaphragm pumps are membrane-type positive displacement pumps that use a membrane made of rubber or fluororesin. The compact, lightweight design makes them easy to install in other equipment and it ...
Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m
... Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps Displacement ...
FLUIMAC
Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 3.8 l/min
Pressure: 210, 7 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available in different ...
LARIUS SRL
Flow: 3 l/min
Pressure: 6.5, 260 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available in different ...
LARIUS SRL
Flow: 7.5 l/min
Pressure: 7, 210 bar
Weight: 60 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available in different ...
LARIUS SRL
Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C
... Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, ...
DESMI Pumping Technology A/S
Flow: 2,000, 2,400 m³/h
Pressure: 25 bar
Head: 195 m
... Applications Within the marine industry the pumps are suitable as: • Fresh and seawater cooling pumps • Bilge and ballast pumps • Fire-fighting • General service pumps • Transport ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 30 bar
Head: 65 m
... flexibility • Compact design • Installation and serviceability Design Features ESL pumps are single-stage centrifugal pumps equipped with mechanical shaft seal for maximum life and minimum friction ...
DESMI Pumping Technology A/S
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.1 mm
... The PDP 005 volumetric pumps are innovative, compact, versatile and precise 2K fluid dispensing systems. The special screw pump enables controlled dispensing for 2K fluids. The system offers greater efficiency, ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.1 mm
... The PDP 015 volumetric pumps are innovative, compact, versatile and precise 2K fluid dispensing systems. The special screw pump enables controlled dispensing for 2K fluids. The system offers greater efficiency, ...
DAV TECH Srl
Pressure: 0 bar - 6 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.1 mm
... The PDP 050 volumetric pumps are innovative, compact, versatile and precise 2K fluid dispensing systems. The special screw pump enables controlled dispensing for 2K fluids. The system offers greater efficiency, ...
DAV TECH Srl
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
... STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
Flow: 0 m³/h - 110 m³/h
Head: 394, 385 m
Power: 0 kW - 55 kW
... MULTI-STAGE VERTICAL PUMPS Multi-stage vertical electric pumps, non-self priming, compact to minimise footprint, suitable for lifting stations with or without autoclave, irrigation systems, and wherever ...
Flow: 8 m³/h
Head: 73 m
Power: 1.5 kW
... ELECTRIC PUMPS BRIO is an electronic device which replaces the traditional pressure switch-expansion vessel system, providing fluctuation-free output pressure and ensuring the pump is protected against running dry. APPLICATIONS Compact ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C
... ECO. pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO. pump lends itself to many common applications. The stainless steel body and compact design ...
Flow: 0.00015 l/min - 0.006 l/min
Pressure: -0.6 bar - 40 bar
Fluid temperature: -20 °C - 150 °C
... connections, the ECO. pump also offers an optional heating jacket feature. This is especially beneficial for processing media that require a controlled temperature to maintain their properties. In addition to the sanitary connections, ...
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Pressure: 1,600 bar - 4,000 bar
... • Manual pumps for very high pressures, light, compact and easy to carry, made in aluminum • At the maximum pressure, the 1600 bar and 3000 bar hand pumps develop ...
Pressure: 3,000, 1,600, 4,000 bar
Weight: 7.8 kg
... • Manual pumps for very high pressures, light, compact and easy to carry, made in aluminium • At the maximum pressure of 1600 bar – 23000 psi the manual pumps develop ...
Flow: 0.5 l/min - 1 l/min
Pressure: 700, 75 bar
Power: 0.55 kW
... Portable Mini pumps for hydraulic torque wrenches Portable Mini pumps for hydraulic torque wrenches, only 12 kg. Suitable for operating small and medium-sized hydraulic hex wrenches or square drive ...
... The Simaco VP-220 is an ultra- compact vertical peripheral pump for submersible and immersible use, suitable for clear waters, oils and non‑aggressive dilutions without abrasive solids. Available in single-phase and three-phase ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures ...
SIMACO ELETTROMECCANICA
Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m
... VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining the working pressure in open circuit systems. Developed ...
SIMACO ELETTROMECCANICA
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
... Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical seal - - SiC O-rings - - Viton Optional: ...
Brinkmann Pumpen
Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW
... Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline ...
Brinkmann Pumpen
Pressure: 10, 30 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
... ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, ...
Flow: 0 l/min - 3 l/min
Head: 6 m
Fluid temperature: 5 °C - 70 °C
... for either vacuum operation, liquid transfer, or alternating operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliabler, highly efficient. TF ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.65, 11 l/min
Pressure: 100,000, 120,000 Pa
... Dual Head Miniature Diaphragm Pump Features: Compact size Highly airtight Higher flow output Corrosion resistance Dual Head Miniature Diaphragm Pump Applications: ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m
... for either vacuum operation, liquid transfer, or alternating operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliabler, highly efficient. TF ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
... CTI INDUSTRIAL PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material - AISI 316L stainless steel. The ...
Tapflo
Flow: 0 m³/h - 27 m³/h
Head: 1 m - 20 m
Power: 0.12 kW - 4 kW
... CTM MAGNETIC DRIVE PUMPS CTM is a compact close coupled pump perfect for service in little spaces like in OEM installations. Tapflo CTM magnetic drive pumps are centrifugal pumps ...
Tapflo
Flow: 0 m³/h - 28.5 m³/h
Head: 1 m - 19 m
Power: 0.75, 1.1, 3, 4 kW
... CTP PLASTIC PUMPS COMPACT AND RELIABLE MECHANICALLY SEALED PUMP The CTP pumps are semi open single stage centrifugal pumps. Since there are no metal parts on the ...
Tapflo
Pressure: 1 bar - 10 bar
... Operating pressures of up to 70 bar (1.015 psi) The compact and robust pumps of the MLGP series are available in a wide range of options to compress a broad spectrum of refrigerants. Material: Pump ...
Maximator GmbH
Pressure: 52 bar
... Operating pressures of up to 52 bar (755 psi) The compact and robust pumps of the SLGP series are available in a wide range of options to compress a broad spectrum of refrigerants. Material: Pump ...
Maximator GmbH
Pressure: 90 bar
... Single and two stage With one air drive piston The compact and robust pumps of the GLGP series are available in a wide range of options to compress a broad spectrum of refrigerants. Material: Pump ...
Maximator GmbH
... Crank pump for AdBlue® with PVC hose 3 m and mounting plate Order-number: 11163 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing in stainless ...
CEMO
Flow: 30 l/min
... Electric pump 12 V, 30 l/min Order-number: 8640 Details Diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due to low weight -2" connector ...
CEMO
Flow: 35 l/min
... Electric pump 230 V, 30 l/min Order-number: 8639 Details NSA diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due to low weight -2" ...
CEMO
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump provides ...
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... significantly reduced pump vibrations and fluid pulsations. With a patented Smooth Start Shifter (3S) actuator and enlarged air passageways, these pumps prevent unexpected stalling and freezing of the Diaphragm Pump. ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... UP10 pump makes the difference through: · HIGHER EFFICIENCY. Maximum fluid flow with reduced air consumption. · INCREASED RELIABILITY. No stall, no icing, reliable start-up and longer air valve and diaphragm lifes. · MAXIMUM VERSATILITY. ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m
... UP10 pump makes the difference through: · HIGHER EFFICIENCY. Maximum fluid flow with reduced air consumption. · INCREASED RELIABILITY. No stall, no icing, reliable start-up and longer air valve and diaphragm lifes. · MAXIMUM VERSATILITY. ...
SAMOA Industrial, S.A.
Flow: 80, 60 l/min
Pressure: 147, 235 mbar
Power: 51 W
... Pressure use Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use Applications • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...
Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W
... The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, it operates ...
Nitto Kohki Europe
Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W
... The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure and 0.1 bar rated ...
Nitto Kohki Europe
Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar
... The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum free air displacement. ...
Nitto Kohki Europe
Flow: 0 l/min - 2,000 l/min
Head: 0 m - 80 m
Power: 0.81 kW - 8.1 kW
... Tsurumi engine pumps feature a heavy-duty, compact and easy-to-use design. Made with excellent materials, these engine pumps can withstand the harsh conditions of construction sites and elsewhere, offering ...
Flow: 0 m³/min - 1.1 m³/min
Head: 0 m - 25 m
Power: 1.5, 3.7, 2.2 kW
... is a 2-pole motor, compact type submersible pump equipped with a vortex impeller for pumping sewage and wastewater. The semi-vortex design provides a solids passage that is 70% or more* of the discharge bore, thus reducing ...
Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C
... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction and the pump ...
Flow: 300 l/h
Pressure: 0.25 bar - 2.5 bar
... PTFE, FKM The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range . The construction and the pump capacity are adapted to the requirements of analytical ...
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
... High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...
Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg
... material hose. Positive features include the low air consumption, the pressure limitation and the compact size, with which you will not feel crowded even on small construction sites. Fields Of Application Cavity filling Masonry ...
Pressure: 120 bar
Weight: 26 kg
... WIWA INJECT 2K 14015 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor so that mixing errors cannot occur due to the positive control. The compact ...
Pressure: 200 bar
Weight: 55 kg
... 14025 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor, so no mixing errors can occur due to the positive control. The unit is equipped with a flushing pump ...
Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar
... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by up to 70% compared ...
Verder Liquids
Flow: 0 l/h - 593 l/h
Pressure: 6, 12 bar
... 15 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by up to 70% compared ...
Verder Liquids
Flow: 2 l/h - 22.5 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, ...
Verder Liquids
the best suppliers