DN: 0.5, 0.25 in
Pressure: 6,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for ...
DN: 32 mm - 1,000 mm
Pressure: 20 bar
Temperature: -35 °C - 110 °C
... The VTB200 series Butterfly valve is different because of its price and quality. The Butterfly valves can be used for many different applications and media. The body is made from cast iron with an epoxy coating, the ...
Vapo Techniek B.V.
DN: 15 mm - 50 mm
... Model No.: CS100-Socket, CS200-Thread, CS300-Flanged Body Material:UPVC,PP Seat:PTFE O-Ring:EPDM,VITON Size: DN15(1/2")~DN50(2") Standard: JIS,ANSI,DIN ...
Shie Yu Machine Parts Industrial Co., Ltd.
... Electrical Post-Mix Taps with Flow Control to maintain the fluid flow constant depsite any pressure variations. Ideal for water, soda, soft drinks, fruit juice and wine. Operates with coils of 24V / 50Hz 5W. SK approved. Electric Pre-Mix ...
... is included in the valve. The hydraulic actuator is controled by an hydraulic power unit and an electrical panel. Accesories: Welded constrution to change from square to round section. USE Installation in water dams to control ...
Pressure: 210, 315 bar
Flow rate: 57, 85 l/min
... cylinder applications where directional valves (specifically proportional valves) are sensitive to flow intensification of powering the rod side. The DCB10-MC diverts flow directly to tank and bypasses the directional ...
Comatrol
DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -15 °C - 90 °C
... T-handle, gear handle RALLENTY. Available colours: black, red. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control. ...
EFFEBI
DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F
... Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve stems are stainless steel and valve ...
Clark
DN: 0.5 in - 12 in
Pressure: 110 psi
Temperature: 200 °F
... sanitary high performance 316 butterfly valve series stand above others in the sanitary and fine chemical fields. The valves incorporated an advanced design with characteristics unseen in other valves. ...
Valtorc
... P2/J2 series adopt unbalanced trim design, top guiding, and simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 series are also ...
Wuxi Smart Auto-control Engineering Co., Ltd.
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy cleaning of the ...
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection valves ...
... The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap style (round ...
... The material regulator valve (MVR) is an air operated valve that slides. The MVR Valve has a tapered needle and specially designed fluid ports to permit precise regulation and rapid ...
DN: 20 mm - 200 mm
Pressure: 20, 50 bar
Temperature: -50 °C - 427 °C
... & Low Flow Trim Tight Shutoff Environmental Packing Advanced Digital Positioning & Control Reliable Rugged top-guiding of the plug promotes maximum valve stability under adverse ...
Pressure: 700 psi
... reliability, and unparalleled valve life. Features Precision superheat control optimized for R-410A systems and newly created A2L refrigerants, including R-454B. Enhanced power element design offers extended valve ...
... integrated quick-release
valve to enable rapid actuation or bail-off of train brakes.
Key features
- Pneumatic control valve designed for locomotive braking systems
- Integrated
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made of stainless steel, ...
DN: 0.125 in - 1 in
Pressure: 12,500 psi - 15,000 psi
... Parker's MAB Series MPI Ball Valves provide reliable shut-off or switching functions in a heavy duty, bar stock design. The proven trunnion style ball design and spring loaded seats make the MAB series ideal for severe service applications. ...
Watts Fluid Air
Pressure: 600 psi
... the battery back-up for when there is a power failure. Features Double O-ring seal on valve shaft Manual test button Corrosion resistant valve coating Reliable long-life Visual operation indicators Benefits ...
... seals. The result – a quality EGR valve, highly resistant to extreme heat, contamination, corrosion and wear. Precision engineered Even the smallest of differences in the shape of the valve head can affect both ...
DN: 15 mm - 400 mm
... Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control ...
ASCON TECNOLOGIC
DN: 15 mm - 400 mm
Pressure: 0.8 bar - 2.8 bar
... Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling ...
ASCON TECNOLOGIC
DN: 15 mm - 20 mm
... Threaded valves with 500 N actuator -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model ...
ASCON TECNOLOGIC
DN: 11 mm
Pressure: 0 bar - 4 bar
Temperature: 20 °C
... Ball valve PP fits all containers with G 3/4" connection thread. It can be attached to nearly all containers with thread adapters. Robust industrial quality, large flow. - Suitable for crystallising media - With connecting cap nut, guaranteed ...
... hand-operated control valves provide a simple and cost-effective alternative to our proportional HCV and RCV control valves. The lever allows direct switching between ...
DN: 6.35 mm
Pressure: 10 bar
... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, 1/4", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/4" (F). 24 V DC. Normally open type N.O. 10 bar. ...
Pressure: 100, 500, 1,000 bar
... purpose, Poppe + Potthoff Maschinenbau GmbH develops and manufactures high-pressure valves for the control and regulation of volume flows in hydraulic applications. The valves are pneumatically or electrically ...
Flow rate: 5 l/min - 2,400 l/min
... require specific control characteristics. For applications such as Damper testing where both high velocities and low speed precision control are necessary, it’s possible to install both 3 stage and 2 stage valves ...
DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C
... purposes. Description BRC/BDV Series Diaphragm Valve BRC and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves ...
DN: 5 mm - 40 mm
Temperature: -40 °C - 125 °C
... Nylon screw plugs Materials: UL approved Nylon PA66(Flammability UL94V-2) IP rating: IP68 Operating temperature: -40℃ to +100 ℃ Color: Black RAL9005 Thread Product code thread outer diameter(mm) thread length(mm) PG7 PG7-PL 12.5 9.5 PG9 ...
DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C
... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm valve ...
Pressure: 3.5 bar
... Product Details
With the SAMflow, sampling of powder and granules from pneumatic conveying lines is effortlessly possible. This device uses the conveying pressure of the process almost automatically for sample extraction. It uses the existing ...
Pressure: 0 bar - 15 bar
... Required to control vacuum for Hei-VAP Control models with valve-controlled vacuum pumps. Can be positioned for easy access and cleaning. Not required for manual vacuum control ...
DN: 2 in - 12 in
Pressure: 200 psi
... • Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be operated by the ...
... Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. They are a crucial ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
... Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available cross-section can be increased or decreased, ...
Temperature: 60, 100 °C
Flow rate: 4 l/min - 15 l/min
... range of flow control valves offers excellent, economical, independent flow control, which can be used in any application where a needle flow control valve is required. ...
MPB INDUSTRIES
DN: 0.375 in
Pressure: 700 bar
... ⅜" - 18 NPT connections Ensures system safety and control ...
Pressure: 124, 34, 103, 138 bar
Temperature: -30 °F - 250 °F
... 4.83 bar] Control Pressure Compatible With FW Murphy Level Controls Soft Seat Valve Manual Valve Operator The DVU Series are pneumatically controlled dump valves. ...
DN: 50 mm - 60 mm
... Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return valve • ...
... be paid to the use of electric ball valves and butterfly valves in the following environments. Function classification 1. Bypass valve: The ball valve is generally opened by static ...
Pressure: 350 bar
... C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal diameter: ND 4 .. 12 ports: G1/8 .. G1/2 ...
the best suppliers