Converters

... The EBC 300 eBus Coupler Serial RS232 enables the direct connection to the eBus network of your heating control system via a serial R232 interface. Description EBC 300 eBus Coupler Serial RS232: the data interface to the eBus via the serial RS232 for ...

... meters (109 yards), fiber optics cables are usually used. By using a pair of SPE Converters (Model: BA8NS-CONV), expensive fiber optics cables and fiber media Converters including installation work costs can be eliminated ...

... tried-and-tested quality Level converters are used to supply connected devices with electricity in an M-Bus system. The electricity requirement is counted in “standard loads”. MBS has decoupled the M-Bus/USB level converter ...

... AT Series Converter AT-PM Input type: Potentiometer (Ω) 0~2.0kΩ(3 wire), 2.0kΩ~100.0kΩ (3 wire) Primarily designed for use in the general signal conversion and isolation circuit. This section slim design of the converter, ...

... ensures that the Storm system will provide customers with long years of service. A multi-function universal measuring converter. High accuracy and a broad range of measuring, indication and protective functions, including user-defined ...

... network. Connect a maximum of 31 units of FZ/GZ controllers (32 channels) can be connected to the MODBUS/TCP network. Converter for connecting SRZ series to Ethernet（EtherNet/IP）. Supported models: SRZ (Z-TIO-A / Z-TIO-B, ...

... The MDC 1001G is a compact IP30, industrial-grade Gigabit Media Converter featuring a 10/100/1000TX Ethernet and 100/1000F(x) SFP Fiber interface, supporting Single or Multi-Mode operations. Simple DIP switch settings allow manual speed ...

... The Inter-controller CAN converter (ICCC) is designed to support cooperation between ComAp’s paralleling gen-sets and third-party controllers on one site. Active and reactive power sharing between 32 controllers High flexibility ...

... other machine communication protocols that are supported by the FBR converter. OPC UA is the recommended protocol by the European Industry, in cooperation with FANUC. The FBR converter allows machine tool manufacturers, ...

... Line of LNB meets the needs of recipients (individual and collective) when designing satellite receiving installations. The converters have a protection system that prevents damage to the connectors and the accumulation of water in them. ...

... The function signal converter with 4 I/O ports and a switching output is used for acquisition, conversion and galvanic isolation of 0/4 to 20 mA, 0/2 to 10 V standard signals and binary I/O signals. Port 1,2: - configurable as AI, DI ...

... Converter for LoRaWAN® data to BACnet IP and Modbus TCP/IP. The NBnano contains a LoRaWAN® network/application server and allows conversion to BACnet IP or Modbus TCP/IP for direct connection to a buildling management system. External ...

The MCP3913 device is a 3V six-channel Analog Front End (AFE, containing six simultaneous sampling delta-sigma ADCs, six PGAs, phase delay compensation block, low-drift internal voltage reference, digital offset and gain error calibration registers, and ...

... compact analog to IO-Link device converter that connects to a current (4mA to 20mA) or voltage (0-10VDC) source and outputs the value to IO-Link. The IO-Link Wireless Bridge/Hub connects directly to the Analog Converter, ...

The FC100 is designed for use with the SG000 Strike Guard lightning detector as part of the CS110 and LW110 lightning warning systems. The SG000 outputs its data signal via fiber-optic cable, and the FC100 is installed at the end of the fiber-optic cable ...

Converter with automatic configuration for serial communication USB/RS232 Pc side and RS232/RS485/RS422 instrument side. The 4-layer circuit has galvanic isolation from the power supply at 12...24V AC/DC and between serial inputs and ...

... The MasterCan hot-plug module CAN MK-4I4O is wirelessly connected to the CAN bus with 4 additional inputs/outputs, in order to link with weighing indicators. One analog board (0/10 V or 4/20 mA) can be added to this module. The CAN MK-4I4O hot-plug ...

... PD9 enables the access to devices with RS-485 interfaces for master devices and SCADA applications through the Ethernet network (independently of the communication protocol). Features Simple configuration via webpage or tool software Compact ...

... Together with SATELLINE radio modems, the SATEL I-LINK 100 I/O converter facilitates transparent transfer of contact information or analog signals from one location to another. In the point-to-point operating mode the connection is between ...

Esit Ethernet+ is the device that converts RS 232 serial port of Esit indicators to Modbus/TCP protocol. With this conversion, the data on any Esit indicator can be read from the existing network through the serial port with Modbus protocol and can be ...

... The CAN-LWL converter from Löhnert Elektronik is used to transmit CAN telegrams via fibre optics. This type of transmission achieves very long ranges without influence by electromagnetic interference fields (EMC). One transmission path ...

... device In media converter mode, the device converts up to two BASE-T1 signals to Standard PC Ethernet. In the operating mode Network TAP (Test Access Point), data can be decoupled from both transm 2-in-1 device In media converter ...

... The TBS03 SDI-12 to USB Converter is an Interface for connecting a PC to one or more sensors with an SDI-12 interface. The TBS03 connects to the USB interface and provides SDI-12 compliant supply and data interface. TBS03 is a versatile ...

... These Current Converters accept a 24Vdc power supply (nominal) and a 4-20mA input signal converting it to a 0-200 mA current output. Span and zero is user adjustable. A diagnostic LED indicates operational status, glowing green when the ...

The Wi-CAN device is connected to the CANBus line over the wireless network and is used to access the information of the connected devices, set parameters and update the software. There must be a wireless internet network in the environment where the ...