- Electricity - Electronics >
- Electronic Component >
- Converter
Converters
... HDMI TO VGA ADAPTER WITH AUDIO SUPPORT 3D FEATURES ...
... PCV10 is a multirange converter / isolation amplifier with current, voltage and pulse inputs and current, voltage, pulse or relay outputs. The unit is supplied with 3 current and 3 voltage input connections, which makes it possible to ...
COMADAN
... With this digital to analog converter, you can generate an analog voltage using a digital I2C signal. The I2C address can be changed from 0x60 to 0x61 by changing a solder bridge. The DAC has an integrated EEPROM memory, which makes ...
Joy-It
... Output Signal Type: - PVEH Input Signal Type: - PWM Suitable For: - Danfoss PVG32, ifm CR204x, M12 passive splitter Product Family: - Accessory Module Side Type: - M12 male Module Side Pin #: - 3 Module Side Angle: - 0° Field Side Type: - AMP JPT-4 Field ...
Data Panel GmbH
... DVI TO VGA Converter DVI-D input signal VGA output signal Resolution 1920 x 1080 Aluminium box Power supply included ...
... TBJ156HD-01 LCD Scaler Board | Convert EDP 30-pin to HDMI, VGA, DVI | Support LCD resolution (max.): 1920×1080, typical screen size: 11.6″/ 13.3″/ 15.6″ | Support button operation, multi-function on Screen Display (OSD) operation, and optional remote ...
TAILOR PIXELS TECHNOLOGY CO., LTD.
... The OMX 200 model series are digital DIN rail mounted signal converters housed in an enclosure only 12.5 mm wide. The OMX 211PM type is a simple single-channel isolator with a convenient setting of the input and output ranges either ...
Orbit Merret s.r.o.
... The e-lightxs Industrial Ethernet media converters consists of a short body with a position of 80 x 62 x 25 mm. The horizontal structure of the stainless steel body provides an exceptional high level of adaptability and security for various ...
eks Engel GmbH & Co. KG
... The Modbus protocol converter from GIC has a serial protocol support for Modbus Master/Slave and a network protocol braced for Modbus TCP. The RS232, RS422 and RS485 network that supports the sequential interface. The unit has a serial ...
... configuration and installation of the bridge. Serial RS232/RS485 – Ethernet converter MDB-E is a bidirectional converter between the Ethernet communication channel and RS232 / RS485 serial channels. Therefore, it ...
4neXt
... HM01 USB to RS485 converter USB-RS485 converter HM01 serves as a converter from a USB standard to a half duplex RS485 standard (ANSI TIA / EIA 485-A-1998; Approved: March 3, 1998; Reaffirmed: March ...
HELM d.o.o.
... Wireless M-Bus Converter Products Application Building technology Communication devices Concentrators Local / district heating Products Medium Systems & Software Thermal energy Water Products ...
... LoryNet, a virtual cable platform based on LPWA (Low Power Wide Area) communication technology LoRa, connects sensor nodes, converters, repeaters, and gateways via the Internet to create an environment where communication is as easy as ...
SystemBase Co., Ltd.
... applications Multiple mounting options to accommodate space limitations The FLPS04 is an outdoor rated, line powered up- converter system designed for distributed power communications applications, using ±190Vdc line powering (RFT-V circuit) ...
... or by email [email protected] Aecl AUS-405 RS485/RS232 to LoRa Converter *Support Modbus RTU protocol. *Not Support LoRaWan protocol. AUS-405 RS485/RS232 to LoRa Converter is the media for integrating the ...
Autotronic Enterprise Co., Ltd. (Aecl)
... E-KC-100 Series head type temperature converters are electronic units designed by using microcontroller, inside plastic roller, capable of being installed inside thermocouple or resistance thermometer head. They convert the thermocouple ...
... AES-RTX is a device for converting the digital audio signal in AES-EBU and vice versa. Its use is intended for systems with mixed technology, where in some cases the digital audio processing it is mandatory. The particularity of AES-RTX is also to be ...
... electrostatic protection and 600W/ms lightning protection -40℃~+85℃ working temperature The MWE820B converter is a USB to RS232/485/422 interface converter that can realize bidirectional data conversion between USB ...
Wuhan Maiwe Communication Co., Ltd
... The DM-232TO485 communication line converter is available for 35 mm rail mounting. The converter supports both automated and controlled switching of transfer direction with maximum transmission rate of 115 kBd. The line ...
AMiT, spol. s r.o.
... External RS232 to RS485 converter for UPS and STS • For long distance communication • Bi-directional operation • 4 wire RS485 output (Half & full duplex) ...
Tescom
... MultiTC is the standard interface for connecting WYLER inclination sensors (ZEROTRONIC or ZEROMATIC) to a laptop. The MultiTC not only ensures that the correct power is supplied to the sensors (5V to the ZEROTRONIC sensors, respectively 24V to ZEROTMATIC ...
WYLER AG
... TTL and LVTTL to RS232 Interface converter from TTL and LVTTL to RS232 ...
... manufacture of ultrasonic converters. These high standards which we always strive to maintain and evolve are a key part of our success. And our customers benefit from them especially. For example: a special add-on on the converter ...
... The TS8300 is professional digital media converter with multiple inputs and outputs, and it can receive, process and distribute diferente signal sources such as: digital audio and video over IP, ASI or RF; digital data such as: Closed ...
Tecsys do Brasil Industrial Ltda
... on the firmware version, the converter may work as (some examples): * Modbus to IEC 61850 protocol converter * MQTT to IEC 61850 protocol converter * Modbus to DNP3 protocol converter * ...
... RIGID CONVERTER MAKING IT FASTER THANKS TO QUICK CHANGE. Converters offered by SONICTECH Ultrasonics are made of titanium and provide the highest quality of the generated amplitude. For layouts of 35kHz, we offer ...
SONICTECH Ultrasonics
... Moreover, the action of the converter may be reversed at the site. In the reverse acting, the output is the opposite of the direct acting mode; for 4...20 mAinput, the output will be 15...3 psig. Since the Series ITP215 converter ...
... APPLICATION Instrument for conversion of a standard direct current signal into a standard pneumatic signal, for the change-over from electrical controllers to pneumatic control valves, or from electrical measuring System to pneumatic controllers. The ...
Valcom
... The IT-IMC-101B is a fast 10/100Base-TX Industrial Ethernet Media Converter, easy to connect server, repeater, switch, device to device, Can satisfy customers require for long distance, high speed, wide broadcast. Beside this, IMC101B ...
Intellisystem Technologies
... Used for the height control in of Plasma Cutting machines It converts arc voltage to frequency It can be interfaced with the peripheral units of the Z32 CNC with a 5V TTL Line Drive optical transducer It introduces a safety isolation ...
... The A4403 is a buck converter that uses valley current-mode control. This control scheme allows very short switch on-times to be achieved, making it ideal for applications that require high switching frequencies combined with high input ...
ZLSN2000 is the first generation module, but with 30mA low power consumption and ten years application experience, it still has good utility value in industrial fields. The module provides 19 dual pin, plugging in user PCB to use, can connect with RJ45 ...
Shanghai ZLAN Information Technology Co.,Ltd
... The ERIS-100 device is a fibre-optic Ethernet converter with a switch function that enables Ethernet networks to be connected in a point-to-point topology using two devices of the same type or two independent packet networks via an optical ...
BITSTREAM S.A.
... GLSUN OTS3000-OEO Optical Electrical Optical Converter (OEO Converter) enables the optical signal be regenerated and amplified to realize SM and MM interconversion, OEO amplification with the principle of optical-electron-optical ...
... MBS100 provides remote access to products that can communicate with MODBUS RTU over MODBUS TCP or MODBUS TUNNEL protocols. Applications Energy Applications Monitoring Energy Analysers Monitoring Power Protection Relays Compensation ...
Mikrodev
... Not backward compatible with USB1.1 and 2.0 S.I.Tech 2187/2188 USB media converter pair extends the range of USB 3.0 beyond the USB 5 meter limit. The USB media converters are compliant with the USB 3.0 specification ...
S.I. Tech, Inc.
... • Compact HDMI 1.4 to SDI converter • HDMI loop out • HDMI extender input (RJ45) • Passes 4 channels of HDMI audio • Built-in interlacer (1080P to 1080i) • Built-in multi-format test patterns • 2 SDI outputs Unbalanced analog ...
Apantac LLC.
... The IS-DG102-F Series rugged Gigabit Ethernet to fiber Industrial media converters are designed for where critical but space-limited applications. The IS-DG102-F Series can be powered by a wide range of DC inputs by an external DC power ...
ISON Technology Co., Ltd.
... Functions The GCAN-205 converter is a standard Modbus Slave station. It will load the data received on CAN bus into the register (address) and wait for the instructions sent by Modbus Master station to read. When the converter ...
Shenyang Vhandy Technology Co.
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.