Flow: 0.2 l/min - 3 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
... The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications thanks to their ...
Anglada Pumps
Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW
... MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘F’ (155ºC), rated IP68. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. ...
Mody Pumps (Europe)
Flow: 0 l/s - 17.5 l/s
Power: 2 kW
... 10, it is hard to find an application that can't be handled by the Inox pumps. All materials in contact with the liquid are made out of AISI 316 stainless steel or better.) Pump type: Electrical submersible Classification: Class ...
Grindex
Flow: 400 m³/h
Pressure: 48 bar
... These pumps can transfer corrosive products, sludge and very viscous fluids. The maximum capacity is 400 cubic meters per hour, and they can handle a maximum pressure of 48 bar. The maximum temperature ...
Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m
... The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small footprint ...
Shijiazhuang Sunbo Pump Co., Ltd
Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump to a control ...
Franklin Electric
... of viscosity High capacity and very compact Handles a variety of corrosive liquids Uses only one mechanical seal Stainless Steel construction for long life Easy assembly/disassembly of pump ...
Flow: 0 l/min - 830 l/min
Pressure: 0 bar - 80 bar
... Three-Screw pump for non lubricating fluids Pumped Liquid Non- or mal-lubricating, slightly abrasive, corrosive Main Fields Of Application Process engineering, power engineering, ...
Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"
... TYPE MC Horizontal single-stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction ...
Flow: 0.5 l/min - 1 l/min
Pressure: 0.5 bar - 1 bar
Head: 2 m
... Printing • Industrial Vacuum and Pressure Generation • Massage Devices • Aeration Systems Miniature diaphragm air pump is driven by a motor driven eccentric wheel to drive the diaphragm inside the pump ...
Shenzhen Boden Technology Development Co., Ltd
Flow: 6.3 m³/h - 460 m³/h
Pressure: 0 Pa - 1,600,000 Pa
Head: 4 m - 132 m
... IH chemical pumps are single stage single suction(axial suction)overhung centrifugal pumps used to deliver corrosive liquid not containing solid particles and similar to water in viscidity.With ...
Flow: 10 l/min - 700 l/min
Pressure: 10 bar - 150 bar
Power: 0.37 kW - 90 kW
... the following features: - Reliability and long life - High performance and efficiency - Low energy consumption Our pumping units are used in various reverse osmosis applications such as: Environmental applications: - Industrial ...
Three Es
Flow: 0 l/min - 250 l/min
Pressure: 2 bar - 5 bar
Power: 3 W - 24 W
... Product Overview
Compact solenoid
pumps are
small electromagnetic
pumps designed for precise, controlled
fluid transfer in space-constrained industrial and OEM applications. ...
... TE25, TE30 models. The unit pump performance representative, for each model, of the relationship between the capacity (l/min) and the pressure exercised by the unit pump (height expressed in metre) - the reference ...
Flow: 200 l/h
Pressure: 15 bar
Power: 0.55 kW
... required. The peristaltic pump which Pers Group recommend is running with an average of 42 rpm @ 50 Hz and pumps 200 L./h. The pump is a 0,55 kW and requires 3 x 400 V AC. The protection class is IP55. ...
Flow: 0 m³/h - 30 m³/h
Pressure: 0 bar - 16 bar
Power: 1.5 kW - 18.5 kW
... Our piston and piston-membrane pumps are designed and sized to ensure efficient and safe operation in small and medium-sized filter presses with recessed plates. Due to their robustness and precise construction, these ...
Flow: 2.5 l/min - 265 l/min
Pressure: 200 bar
Fluid temperature: -30 °C - 200 °C
... Stainless steel reactor discharge pump for chemical polymer production processes – cinox®-V therminox®-V The pump models cinox®-V therminox®-V are discharge pumps. They have been designed for highly ...
Maag Germany GmbH
... Air pressure pump is a new type of transport machinery, is a new type of pump at home. With compressed air as the power source, ail kinds of corrosive liquid, liquid containing particles, ...
the best suppliers