... HIDRACAR oleo-pneumatic suspension cylinders are the ideal oleo-pneumatic suspension system for application in truck and tractor towed load trailers, tanker trailers for the transport of liquids and slurries and fumigation tank trailers. ...
... HIDRACAR oleo-pneumatic suspension cylinders are the ideal oleo-pneumatic suspension system for application in truck and tractor towed load trailers, tanker trailers for the transport of liquids and slurries and fumigation tank trailers. ...
Stroke : 5 mm - 80 mm
Bore: 16 mm - 100 mm
... CU series short stroke cylinders. According to project U.N.I.T.O.P. - RUP/7 Bores from 16 to 100mm, with magnetic piston single and double acting with end stroke elastic cushions. ...
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
Bore: 12, 16, 20, 25 mm
... CK Series (Norma ISO 6432) Miniature cylinders single and double acting Available in standard and magnetic versions.Pneumatic end of stroke cushions for the bores 20 and 25. ...
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
Bore: 12, 16, 20, 25 mm
... CKP Series Miniature cylinders double ended piston rod. Available in standard and magnetic versions. Pneumatic end of stroke cushions for the gores 20 and 25. ...
Bonesi Pneumatik s.r.l.
Force: 190 N - 1,200 N
Speed: 15 mm/s - 90 mm/s
Operating Temperature: -10 °C - 60 °C
... Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C Encoder on request Limit switches ...
MECVEL
Force: 1,200 N - 2,500 N
Speed: 0.9 mm/s - 16.5 mm/s
Operating Temperature: -10 °C - 60 °C
... Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C Encoder on request Limit switches ...
MECVEL
Force: 450 N - 2,500 N
Motor power: 90, 60 W
Speed: 5 mm/s - 110 mm/s
... Permanent magnet motor CE Worm gearbox Acme lead screw Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C* Limit switches, ...
MECVEL
Stroke : 25 mm - 500 mm
Bore: 32 mm - 250 mm
Pressure: 0.5 bar - 10 bar
... Materials of Construction: Aluminium, Brass, Steel, Acetal, Polyurethane, Nitrile (Regular), FKM (High temperature) Mountings: Foot Mounting, Front / Rear Flange, Maie Clevis, Female Clevis,Center Trunnion, Front Trunnion, Rear Trunnion Accessories: ...
UFLOW AUTOMATION
Stroke : 25 mm - 500 mm
Bore: 32 mm - 200 mm
Pressure: 0.5 bar - 10 bar
... Mountings: Foot Mounting, Front / Rear Flange, Maie Clevis, Female Clevis,Center Trunnion, Front Trunnion, Rear Trunnion Accessories: Clevis Foot Bracket, Wall Mounting Bracket, Trunnion Bracket, Rod End Fork, Rod End Aligner, Rod End Spherical Eye Features Adjustable ...
UFLOW AUTOMATION
Stroke : 25 mm - 500 mm
Bore: 32 mm - 125 mm
Pressure: 0.5 bar - 10 bar
... Mountings: Foot Mounting, Front / Rear Flange, Maie Clevis, Female Clevis,Center Trunnion, Front Trunnion, Rear Trunnion Accessories: Clevis Foot Bracket, Wall Mounting Bracket, Trunnion Bracket, Rod End Fork, Rod End Aligner, Rod End Spherical Eye Features Adjustable ...
UFLOW AUTOMATION
Stroke : 200 mm
Bore: 25 mm - 80 mm
Pressure: 0 bar - 200 bar
... steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean surfaces, ...
SSH Stainless
Stroke : 200 mm
Bore: 50, 32, 63, 80, 40 mm
Pressure: 0 bar - 200 bar
... steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean surfaces, ...
SSH Stainless
Stroke : 200 mm
Bore: 25 mm - 80 mm
Pressure: 0 bar - 200 bar
... stainless steel hydraulic cylinder.POM bushing, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean ...
SSH Stainless
Stroke : 750, 2,000 mm
Force: 5, 2.5, 10 kN
Motor power: 180 W
... • Compact & Customised Linear Actuator • Dynamic Load Ratings up to 10kN • Linear Speeds up to 5500 mm/min • Machine Screw & Ball Screw • 3-Phase AC, 1-Phase AC & DC Types • Special Custom Designs Available ...
Stroke : 0.22 in
... Clamping Product Series 010 Port Size SAE #2 Product Type Threaded Body Cylinders Threaded Body 1/2-20 DistributorGroup Workholding (Manual, Power and Hydraulic Clamps) Mounting Threaded Body Jam Nut Included PublishedDate 1674229605000 ...
Force: 0 N - 2,200 N
... ERD low-cost electric cylinder series are the perfect alternative to pneumatic cylinders for automating manual processes. The ERD is an economical electric cylinder and is compatible with many NEMA & ...
Tolomatic, TOL-O-MATIC
Stroke : 40 mm - 50 mm
Pressure: 700 bar
Force: 10 tf - 147 tf
... The HLS low height cylinder range is the most widely used Hi-Force cylinder design in the world today. All models have spring assisted return pistons and combine low closed height with optimum stroke lengths. Offering ...
Hi-Force Hydraulic Tools
Stroke : 5, 15, 10 mm
Pressure: 2, 7 bar
Rod diameter: 16, 6, 10 mm
... Component Parts and Materials 1 Zinc-plated steel Nut 2 Brass Bush 3 Steel Spring 4 Steel Piston rod AISI 303 5 Polyurethane Rod seal 6 Nickel plated brass Shape body 7 Zinc-plated steel Locking screw Fluids Filtered and lubricated compressed ...
AIGNEP
Stroke : 50 mm - 1,000 mm
Force: 11.58 N - 210.92 N
Speed: 250, 500, 800, 1,000, 300 mm/s
... Double speed slide cylinder on a twice enlarged stroke distance by using chain. Possible to make high speed than usual cylinder speed. In case that comparing with usual rodless cylinder, extra guide ...
JRT
Force: 3,000,000 N
... Construction and interpretation of special hydraulic cylinders for prevailing application. The cylinders fulfil all requirements of control appliaction. ...
Stroke : 75 mm - 350 mm
Force: 60 N
Torque: 60,000 Nm
... A complete range of very high precision brushless electric cylinders 3 sizes available Speed up to 800 mm/s High precision 25 µm Satellite roller screws Integrated brushless motorization Extreme durability ...
Stroke : 100 mm - 800 mm
Force: 1 kN - 13 kN
Speed: 0 m/s - 0.08 m/s
... The electromechanical linear actuator ELA consist of a fully enclosed aluminium housing with worm gear pair and thrust bearing, together with a standard built-in motor as well as a thrust and guide tube construction. They are designed for pressure ...
Pfaff Silberblau
Stroke : 6 mm - 8 mm
Speed: 0.05 m/s - 0.5 m/s
... High precision combination of cylinder and linear rail. Flush fitting sensor groove. Magnetic as standard. ...
Mindman Industrial
Stroke : 0.011 in - 50 in
Bore: 0.31 in - 3 in
Pressure: 250 psi
... Line air cylinder sets the standard for a reliable and low maintenance non-repairable air cylinder. This product has versatile options including three-position air cylinders, MRS air cylinders, ...
Bimba
Stroke : 4 in - 48 in
... hydraulic cylinder contain standard features that provide dependable and reliable operation. Features such as induction hardened, chrome plated rods that are polished for long wear life and help protect from external damage and corrosion. ...
Cross Manufacturing
Stroke : 0.79, 1.16, 1.66, 0.76 in
Force: 0 kN - 1,000 kN
... Top Flange Swing Cylinder These popular and highly adaptable swing style cylinders contain built in features, which allow users to simplify the design process. They are directly interchangeable with competitive products. ...
Jergens, Inc.
Stroke : 40 mm - 20,000 mm
Force: 0.3 kN - 60 kN
Torque: 0.14 Nm - 265.39 Nm
... Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading linear motion.Rolled ball ...
Lim-Tec (Beijing) Transmission Equipment Co., Ltd.
Stroke : 20 mm - 100 mm
Pressure: 500, 350 bar
Force: 17.1 kN - 109.2 kN
... or bronze housing for adjustable magnetic sensors double acting, max. operating pressure 350 bar or 500 bar Hydraulic block cylinders are universally used for all linear movements with high force requirements and ...
Römheld GmbH Friedrichshütte
Stroke : 850 mm
... The pneumatic cylinder with guided piston rod is designed to maintain a controlled rotating motion while on the push-in and push-out phase. This double-operating pneumatic cylinder yields a total operating pressure of ...
BANSBACH easylift
Stroke : 1.6 mm - 101.6 mm
Bore: 0.5 in - 4 in
Pressure: 500, 250 psi
... appearance and longevity have made us the leader in compact air cylinders. Pancake cylinders offer novel features and durable construction to ensure greater reliability. We machine the cylinder body ...
FABCO-AIR
Stroke : 20 mm - 200 mm
Pressure: 700, 500 bar
Force: 63 kN - 1,407 kN
... LUKAS offers you a large number of powerful cylinders made of light metal. This makes them easier to transport, user-friendly and corrosion resistant. Our light metal cylinders are available as single-acting and also ...
LUKAS Hydraulik GmbH
... Linear Actuators without Nut DC motors fitted with a lead-screw to drive all your linear motion needs Technical Description: Motor casing:galvanized steel Magnets:sintered ferrous metal Armature shaft bearings:sintered bronze metal bushes Gearbox ...
Stroke : 0 mm - 4,000 mm
Pressure: 5 bar - 250 bar
Force: 0 kN
... Hydraulik cylinder with simple outline The EHZ is a hydraulic cylinder, which can be operated at an operating pressure of up to 250 bar. The EHZ standard cylinder is characterised by ...
Eckart
the best suppliers