Aluminum cylinders

Stroke : 25 mm - 1,000 mm
Force: 0 N - 16,000 N
Speed: 0 mm/s - 7.6 mm/s

MA3 electric actuator is the most powerful that affords a maximum 16,000N force (push/pull). It was specifically designed for heavy-duty applications and harsh working environments that require durability. Examples of applications suitable ...

Force: 6,000, 3,000 N
Speed: 0 mm/s - 4.1 mm/s

TiMOTION’s TA5P is designed using a one-piece aluminum outer cover for increased strength and enhanced protection from contaminants. The TA5P utilizes a linear slide to move the load, instead of a standard extension tube. ...

Stroke : 20 mm - 500 mm
Force: 500 N
Speed: 0 mm/s - 8.4 mm/s

... fire. It is also designed to generate a minimum smoke layer in the lower parts of a room. The VN2 is made of high-quality aluminum, suitable for applications like fall-through protection systems and greenhouses. The VN2 ...

Stroke : 10 mm - 1,000 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s

... compliance with ISO 6432 » Stainless steel rod and barrel » Anodized aluminium end-blocks » Cushioning types: mechanical with bumper, pneumatic auto-cushioning, adjustable pneumatic cushioning Series ...

Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s

... the end-blocks tube are designed in an extremely secure way, making use of cylinder tie-rods positioned internally and not visible on the assembled cylinder. This cylinder series ...

Stroke : 10 mm - 2,500 mm
Pressure: 0.1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s

... resin, mud and wood residue Series 61 cylinders comply with the ISO 15552 standards and can be assembled with the entire range of standard accessories. A permanent magnet, mounted on the piston in these cylinders, enables ...

Stroke : 50 mm - 300 mm
Force: 40 N - 500 N
Speed: 150, 300, 600 mm/s

Electric cylinders with absolute encoder for AC and DC power supply EAC series Features: Battery-free absolute sensor No external sensors required Low heat generation EtherCAT, EtherNet/IP, Profinet, Modbus ...

Stroke : 1 mm - 2,800 mm
Force: 483 N - 7,363 N
Pressure: 0.6 bar - 12 bar

ISO profile cylinder to ISO 15552 with a wide range of mounting options. • Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes • Standard ...

Stroke : 10 mm - 200 mm
Force: 30.2 N - 294.5 N
Pressure: 1.5 bar - 10 bar

... before. Ideal for tight spaces. Extremely robust thanks to its durable materials. • Compact variant of standards-based cylinder DSNU • Quick and easy installation, even in tight spaces • Light weight • Self-adjusting ...

Stroke : 2.5 mm - 25 mm
Force: 5.7 N - 4,712 N
Pressure: 2.5 bar - 8 bar

Fast acting cylinder with outstanding tensile force ratio and hole pattern for fastening to VDMA 24562. • Very short overall length • High forces in a compact size • Piston rod with internal or external thread • ...

Stroke : 15 mm - 500 mm
Force: 10 N - 110 N
Pressure: max 10.0 bar

... different end caps style. The piston is aluminium and the sensor bracket, when required is in stainless steel 316 with plastic adaptor or in plastic material. The cylinder can be fixed ...

Stroke : 25 mm - 500 mm
Torque: 1.1, 1.5, 5, 0.8 Nm
Pressure: 0 bar - 10 bar

Derived from 1320 series ISO 6431 the twin rod cylinders are suitable for applicationsthat require the non rotation of the piston rod and resistance of flexion. Thisis done mounting the cylinder with ...

Stroke : 5 mm - 80 mm
Ambient temperature: -30 °C - 120 °C

This series of cylinders is available in two versions with different threaded fixing holes. The first one includes cylinders from Ø 32 to Ø 100 called “ISO” with fixing holes same as cylinders ...

Stroke : 1 mm - 500 mm
Pressure: 10 bar
Bore: 16, 20, 25 mm

Minicylinders manufactured according to the ISO 6432 regulation having high resistance technopolymer heads and anodized aluminium liner.Available in various versions with a wide range of accessories: • with or without ...

Stroke : 1 mm - 500 mm
Torque: 0.2, 0.4, 1 Nm
Pressure: 10 bar

... torques within the specified limits. The piston rod in Two-Flat cylinders has two opposing longitudinal surfaces and is mode entirely of stainless steel. The front head of the cylinder includes a sintered ...

Stroke : 16 mm - 400 mm
Pressure: 1 bar - 10 bar
Rod diameter: 16, 20, 32, 40, 25 mm

... both the upper and lower side. The bushing guides of the piston rods are fitted directly into the anodized aluminium alloy cylinder liner. There are two possible guiding solutions: sintered bronze bushings ...

Stroke : 25 mm
Force: 445 N
Pressure: 2 bar - 10 bar

... in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - G1/8 Cylinder diameter: - 32 mm

Stroke : 4 mm
Force: 55 N
Pressure: 2 bar - 10 bar

... achieved in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 12 mm

Stroke : 800 mm
Pressure: 1 bar - 8 bar
Ambient temperature: -30 °C - 80 °C

Proven and patented sealing system Interchangeability with series M/46000 Medium: - Compressed Air Port size: - G1/2 Cylinder diameter: - 80 mm

This unit comes with cylinder heads, and a high tensile strength aluminum alloy is held in place by a feeding ring wire. The simple design ensures elimination of the excessive cylinder ...

... walled tubes can withstand denting and the cylinder utilizes washout-proof factory-lubricated grease. This cylinder is available with an extruded barrel in bore sizes of 1-1/2", 2", 2-1/2", 3-1/4" and ...

This easy to repair pneumatic cylinder can be safely operated at an air pressure of up to 200 PSI. The heat-coated aluminum tubing system, as well as the superior wear characteristics make this product ...

Stroke : 0 mm - 500 mm
Force: 138 N - 4,418 N
Speed: 0.01 m/s - 0.77 m/s

... installation there are holes through the cylinder body that can be used with through bolts or female threads on both front and rear plates. A wide range of ISO 15552 cylinder mountings are available for ...

Stroke : 0 µm - 6,000,000 µm
Force: 47 N - 3,010 N
Torque: 0.2 Nm - 360 Nm

... and simple traverse / transfer applications. Product Overview The OSP-P with stainless steel sealing band for ultra-low friction is a completely modular designed rodless cylinder. It offers the most comprehensive ...

Stroke : 1 mm - 165 mm
Force: 80.4 kN

... when either End-Of-Stroke, mid-Stroke or continuous cylinder position indication is required and when operating pressures are up to 140 bar (depending on bore size). Series CHD steel body cylinders ...

Stroke : 100 mm - 1,000 mm
Force: 15,000, 10,000 N
Speed: 0 mm/s - 1,250 mm/s

New electric cylinder for heavy-duty applications RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical heavy-duty cylinder: ...

Stroke : 0 mm - 600 mm
Force: 0 N - 4,000 N
Speed: 0 mm/s - 50 mm/s

... run directly through the cylinder which simplifies start-up and configuration in PLC applications. Furthermore, the connection to the cylinder's fixation is possible with commercial hydraulic cylinders ...

Stroke : 20 mm - 100 mm
Force: 17.1 kN - 109.2 kN
Pressure: 500, 350 bar

B1.554 Block cylinders with aluminium or bronze housing for adjustable magnetic sensors double acting, max. operating pressure 350 bar or 500 bar

Stroke : 25 mm - 150 mm
Force: 125 N - 950 N
Pressure: 3 bar - 8 bar

... the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultra-short guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to: screwed ...

Pressure: 500, 600 bar

... enable cylinder drain. •Flat or tilt (optional) saddle. •Wiper seal to prevent from external pollution •M18x1.5 oil port. Different types of cylinders available : •SLS cylinders ...

Stroke : 40 mm - 20,000 mm
Force: 0.3 kN - 60 kN
Torque: 0.14 Nm - 265.39 Nm

... Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading linear motion.Rolled ...

Stroke : 50 mm - 3,000 mm
Force: 0.3 kN - 1,000 kN
Speed: 10 mm/s - 1,000 mm/s

Servo electric cylinder can replace hydraulic cylinder and pneumatic cylinder completely with the advantages of energy conservation and environmental protection and easily connected to ...

Stroke : 10 mm - 500 mm
Pressure: 1 bar - 10 bar
Rod diameter: 32 mm - 63 mm

... seal 4 Anodised aluminium Front cover 5 Zinc-plated steel Nut 6 Sintered bronze Bearing 7 NBR O-RING Seals 8 Neoprene Bumper 9 Anodised aluminium Piston 10 Polyurethane Piston Seal 11 Bonded ferrite ...

Stroke : 25 mm - 1,000 mm
Pressure: 1 bar - 10 bar
Bore: 160, 320, 200, 250 mm

... Materials 1 Rear head Die-casted Sandblasted aluminium 2 Aluminum back piston 3 O-ring NBR or FKM 4 Magnet Bonded ferrite 5 Piston seal in Polyurethane or FKM 6 Piston in Aluminium 7 ...

Stroke : 25 mm - 1,000 mm
Pressure: 1 bar - 10 bar
Bore: 160, 320, 200, 250 mm

... Materials 1 Rear head Die-casted Sandblasted aluminium 2 Aluminum back piston 3 O-ring NBR or FKM 4 Magnet Bonded ferrite 5 Piston seal in Polyurethane or FKM 6 Piston in Aluminium 7 ...

Stroke : 20 mm - 1,500 mm
Force: 302 daN - 50,240 daN
Pressure: 215 bar

... These cylinders are compatible with ISO VG 46 mineral oils. The V215CR are long strokes hydraulic cylinders and offer strokes up to 1500 mm. The cylinder heads are made of carbon ...

Stroke : 20 mm - 350 mm
Force: 643 daN - 10,048 daN
Torque: 45 Nm - 150 Nm

... a key. These double-acting hydraulic cylinders features the very high resistance and durability of alloy cylinders with the lightness and versatility of aluminum cylinders. ...

Stroke : 80 mm
Force: 393 daN - 6,231 daN
Pressure: 250 bar

... hydraulic cylinder come with a 7075 aluminum alloy body, a chromium-molybdenum steel rod, and 7075 aluminum alloy piston. Heat-insulating flanges are available to separate the cylinder ...

Stroke : 50 mm - 150 mm

... load uniformly over the entire surface. • Custom made hydraulic cylinders with high strength aluminum alloy. Lightweight aluminum hydraulic cylinders Aluminium ...

Stroke : 50, 100 mm
Force: 309.3, 496.2, 1,002 kN

... Steel baseplate to prevent the cylinder from deforming if used on surfaces that are not perfectly flat. FPT - Fluid Power Technology: https://www.fpt-worldwide.com/en/products/lightweight-aluminum-hydraulic-cylinders/

Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN

... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...

Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN

... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...

Stroke : 10 mm - 320 mm
Force: 30 N - 295 N

- Stainless Steel AISI 303 rolled rod to reduce friction as much as possible - Rod and piston seals with the highest efficiency and longest durability - Metal piston to resist to extreme stresses - ...