Measurement probes

208 companies | 636 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
current probe
current probe
AmpFlex

... current sensor composed of a flexible Rogowski coil and an electronic module. The sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed ...

See the other products
AEMC Instruments
conductivity probe
conductivity probe
HQD Intellical™ series

The IntelliCAL™ Model of Electrochemical Laboratory Measuring Instrument: pH, Conductivity, ORP, Dissolved Oxygen, manufactured by Hach Lange, features a high quality digital meter that store all relevant characteristic parameters in ...

See the other products
HACH LANGE
dissolved oxygen probe
dissolved oxygen probe
HI76407

... Temperature Sensor The HI76407 is a standard Clark-type polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. The probe is constructed of durable ...

See the other products
Hanna Instruments
conical probe
conical probe
432 series

FTC offers six Perspex and one stainless steel conical probes with angles ranging from 15° to 90°. Cone penetrometry is traditionally used within dairy products to assess hardness and spreadability. It has also found ...

See the other products
Mecmesin
texture analysis probe
texture analysis probe
432 series

Food Technology Corporation’s heavy duty range of probes are made from stainless steel and can be used for higher force or corrosive applications where strength and robustness are critical. Ideal for compression, penetration ...

See the other products
Mecmesin
food texture analysis probe
food texture analysis probe
432-08 series

Available in either 1mm or 2mm diameter, the FTC needle probes are used on fruits, vegetables, confectionery, cosmetics and fats. Values relate to firmness, yield, consistency and even skin or coating characteristics. Solid ...

See the other products
Mecmesin
flue gas probe
flue gas probe
WDG Insitu

... Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer ...

water quality probe
water quality probe
HFS series

... Hydrocarbons submersible probe provides affordable real-time measurements of Oil and PAH in water and is especially suited to monitoring municipal and industrial wastewater, surface water, raw water intake, ...

See the other products
Real Tech Inc.
water quality probe
water quality probe
BZA series

BENZENE PROBE Real Tech’s robust Benzene submersible probe provides affordable real-time measurement of benzene changes in water or wastewater. The probe utilizes patent-pending ...

See the other products
Real Tech Inc.
BOD probe
BOD probe
BA series

BOD/COD PROBE Real Tech’s robust BOD/COD submersible probe provides affordable real-time measurement of organic matter in water or wastewater. The BOD/COD probe utilizes ...

See the other products
Real Tech Inc.
redox probe
redox probe
Swansensor SI

Description Redox (ORP) sensor with platinum tip and free flowing electrolyte

sampling probe
sampling probe
RPB / RPS

... tip and include a manual safety shutter; RPS probes are stainless steel and include an emission indicator. These are non-immersion probes that are ideal for measurement of solids and ...

See the other products
Ocean Insight
sampling probe
sampling probe
DR-Probe

Details The DR-Probe is a 45° diffuse reflectance probe with integrated tungsten halogen light source for simple yet elegant reflectance measurements. By fixing the probe’s ...

See the other products
Ocean Insight
reflection probe
reflection probe

Our premium-grade reflection and backscattering probes are durable, high-quality patch cords that consistently deliver uniform results with minimal signal variance. Available in a variety of fiber core sizes and wavelength ...

See the other products
Ocean Insight
voltage probe
voltage probe
MS-62, MS-63

light probe
light probe
FCR-7UVIR200-2-BX/ME*

... or specular materials, reflection probes are used. The light from a light source is sent through six illumination fibres to the sample and the reflection is measured by a 7th fibre in the centre of the reflection probe ...

See the other products
Avantes
light probe
light probe
FCR-14UVIR200-2-REF-BX/ME*

... of reflection probes with a self-referencing feature. The light coming from the light source is bundled into 12 fibres, which are split into two 6-fibre bundles. One of these bundles is carried to the probe ...

See the other products
Avantes
reflection probe
reflection probe
FCR-19UVIR200-2-BX/ME*

For some measurements, a reflection probe is needed that can be coupled to two spectrometers and a light source. A good example is a reflection measurement in the UV/VIS and NIR range. ...

See the other products
Avantes
carbon dioxide probe
carbon dioxide probe
GMP251

for %-level measurements in life science incubators, cold storage facilities and all demanding applications The Vaisala CARBOCAP® Carbon Dioxide Probe GMP251 is an intelligent, stand-alone, %-level ...

See the other products
VAISALA
radiation probe
radiation probe
FLA series

Probes for optical radiation • Global Radiation probe head • Illuminance measuring head • UVA Radiation probe head • UVB Radiation probe head • ...

pH probe
pH probe
FY96 series

... functions By using reference solutions the calibration of pH and redox probes can be started with the push of a button. As the adjustment is stored in the ALMEMO® connector, the probe can also be used ...

combustion probe
combustion probe
CP35

For use with KANE250/425/450/455 Combustion probe with flexible shaft and integral thermocouple

conductivity probe
conductivity probe

Conductivity Probe, 4 cell, with 4 platinum band contacts, has 12mm dia x 110 mm length, glass body. K=1 cell constant. Glass/epoxy body. 30K ohm thermistor. Includes 3 ft cable with waterproof Switchcraft connector. ...

passive probe
passive probe
910 series

... RF, microwave and pulse probes allowing cost-effective fingertip browsing of broadband signals up to 5 GHz (10 Gb/s). With less than 0.4 pF tip capacitance and ground-referred loading of 220 Ω to 910 Ω, the PicoConnect ...

See the other products
Pico Technology
multi-parameter probe
multi-parameter probe
STACSENSE UV254

Organic mater levels by measuring UV absorption at the wavelength 254 nm Multiparameters : SAC254, BOD, COD, TOC and turbidity Sensor without reagent or consumable 2 optical path available : - 2mm : wastewater - 50 mm : natural waters Very ...

conductivity probe
conductivity probe
TRIPOD

The new digital TRIPOD of AQUALABO (Brand Ponsel) allows to measure until 8 physico-chemical parameters in the same time dedicated to the quality of waters among the following ones: - pH, ORP, Temperature,- DO (by optical way),- Turbidity ...

dissolved oxygen probe
dissolved oxygen probe
OPTOD

The OPTOD (Optical Dissolved Oxygen technology) is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05 and compliant to ISO 17289. Without calibration requirements and thanks ...

current probe
current probe
BCP-610

... current traveling through the probe window area. For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small ...

See the other products
A.H. Systems
current probe
current probe
BCP-611

... -611 monitoring current probe is a great measurement tool for MIL-STD, CISPR and many automotive specifications. The 1V/A flat response of this current probe makes it ideal for a 1:1 ...

See the other products
A.H. Systems
current probe
current probe
BCP-614

... means of clamp-on current probes. The BCP-614 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes ...

See the other products
A.H. Systems
gas probe
gas probe
SPS-NO3

... ) to connect with SEBA data loggers Benefits High accuracy, drift-free: Using a photodiode to take differentiated measurements of the incoming light at wavelengths of 212 nm, 254 nm, and 360 nm, the SPS-NO3 is able ...

water quality probe
water quality probe
MPS-K16/Qualilog16

... use) Individually configurable: Depending on the measurement task at hand, the MPS-K16 can be individually equipped with a maximum of twelve water quality sensors and can detect up to 17 measurement ...

water quality probe
water quality probe
MPS-D8/Qualilog8

... operating software (Windows). This will automatically detect if a probe is spent and must be replaced. Robust: The housing of the MPS-D8 is made of high-quality 1.4439 stainless steel. The probe can ...

water activity probe
water activity probe
HC2-AW - AW

For water activity measurements in bulk materials such as flour, grain, spices, etc. For solid and pasty products such as meat, sausage as well as oils, fats, etc. • Measurement range: 0…1 aw (0…100 ...

water activity probe
water activity probe
HC2-AW-USB

... application, as multiple probes can be attached to a single PC. USB station probes USB probes can be ordered as single probe or as a set including the HW4 software with ...

water activity probe
water activity probe
HC2-AW-USB-SW

... application, as multiple probes can be attached to a single PC. USB station probes USB probes can be ordered as single probe or as a set including the HW4 software with ...

ultrasonic probe
ultrasonic probe
SUF52FRF

... Description Ultrasonic probe for non destructive test (NDT) on concrete foundation poles. SUF52FRF model is an ultrasonic high efficiency active transducer which can be used both as emitting (TX) and as receiver (RX) ...

See the other products
M.A.E. S.r.l.
thermal conductivity probe
thermal conductivity probe
CTS120

THERMAL CONDUCTIVITY PROBE FOR SOIL , LENGHT 120 CM. Description CTS120 is a probe, for measures in the soil (lenght = 120 cm), that offers the possibility to perform a practical and fast measurement ...

See the other products
M.A.E. S.r.l.
thermal conductivity probe
thermal conductivity probe
CTS45

THERMAL CONDUCTIVITY PROBE ON SAMPLES, LENGHT 45 CM Description CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical ...

See the other products
M.A.E. S.r.l.
COD probe
COD probe

... path design, which can automatically compensate the turbidity in real time, eliminate the interference of turbidity to the measurement, and make the sensor more stable and reliable. The instrument does not need reagent, ...

current probe
current probe
I-prober 520

Positional current probe, PCB track Touch & Measure • Current measurement from insulated probing of conductor • Suitable for observation and measurement of current in PCB ...

flue gas probe
flue gas probe
HSP4

Zetron HSP4 Water & Dust Filter High Temperature 400 Degree Probe PTM600-FG flue gas detector can optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas ...

parabolic probe
parabolic probe
SONOSPOT

The Sonospot - Snaphone, manufactured by Sonotech® is a sound detector of emissions in the ultrasonic frequency range caused by compressed-air leakages and electric partial discharges. It allows a reliable and precise detection even ...

See the other products
SONOTEC GmbH
thickness probe
thickness probe
SONOSCAN TS5H

SONOSCAN TS5H Ultrasonic transducer for high temperature Testing Also available as complete set with SONOWALL 70 A-/B-Scan thickness gage, temperature compensation function, armored cable, heavy-duty impact protector, and free SONOGRID ...

See the other products
SONOTEC GmbH
ultrasonic probe
ultrasonic probe

Pipelines, particularly in the petrochemical industry, are often exposed to high pressures, extreme temperatures and aggressive media. In order to avoid accidents, constant quality control is essential. This is done automatically with ...

See the other products
SONOTEC GmbH
test probe
test probe
RAPTOR PT

RAPTOR-PT electrical substation maintenance accessory Raptor Polarity Tester The Raptor Polarity Tester is a simple handheld probe that helps you quickly verify the various connections in a three-phase installation ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us