Non-contact position sensors

Measuring range: 20,000 mm

The combined displacement and inclination sensor posiwire® WST21 determines linear positions up to 20.000 mmm and inclination positions up to +/- 180º. - with magnetic ...

Measuring range: 1,000 mm

The new generation of sensors. More robust than ever. The new generation of posiwire® cable extension sensors with magnetic absolute encoders is significantly more robust than conventional cable sensors: ...

Measuring range: 0 mm - 5,750 mm

Contactless. Flexible installation. posichron® sensors offer absolute, contactless, and wear-free measurement of linear positions. The posichron® measurement system is extremely robust ...

Measuring range: 32 mm - 256 mm

... service life thanks to non-contact measurement principle •Advanced diagnostic options thanks to data transmission via IO-Link The intelligent T-slot position sensor MPS-T ...

Measuring range: 25 mm - 200 mm

This cylinder sensor has a detecting range with different lengths available of 32 mm, 64 mm, 96 mm, 128 mm, 160 mm, 192 mm, 224 mm and 256 mm. It has an electrical zero-point and an adjustable final point. Its selectable ...

Measuring range: 107 mm - 1,007 mm

The MPA is a series of analog positioning sensors from Sick that can be installed with adapters on different cylinders due to its versatile housing. It has the ability to measure lengths from 107 mm to 100 mm in 36 mm ...

Measuring range: 0.1 mm - 1 mm

Magnetic sensor MSAC506 Absolute-rotative, SSI interface, resolution max. 16 bits A combination of the MSAC506 magnetic sensor and the MRAC506 magnetic ring forms a system for absolute angle measurement. ...

Measuring range: 0.1 mm - 2 mm
Measuring rate: 3.8 kHz - 1,250 kHz

Magnetic sensor MSC500 Compact sensor, incremental, digital interface, resolution 1 μm The MSC500 magnetic sensor has a large, multi-color status LED that makes commissioning and function ...

Measuring range: 2 mm
Measuring rate: 20 kHz

Magnetic sensor MSK320SKF ATEX version, incremental, digital interface Profile MSK320SKF: High scaling factor ≤64 Pole length 3.2 mm Speed-proportional signal output Reading distance ≤2 mm Works with MB320/1 ...

... alternative measuring systems. With measuring lengths of up to 2 m, the Li sensors outperform magnetostrictive linear position sensors, which, due to their operating ...

Measuring range: 25 mm - 40,000 mm

Path measurement can be solved with various sensors. The inductive linear position sensors operate contactless and wear-free according to a revolutionary measuring principle. ...

- Weather-tight housing for outdoor applications - Various switch variants for virtually all ranges of application (electromechanical, inductive NPN, inductive PNP, inductive NAMUR, magnetic reed) - Intrinsically safe variants for use ...

- Compact plastic housing - Inductive double sensor - PNP, NAMUR, 2-wire DC, AS-Interface switching outputs - Intrinsically safe variants for use in potentially explosive areas - cCSAus Listed, General Purpose - ...

- For mounting on drive shafts of standard actuators in accordance with VDI/VDE 3845, available with two different diameters and different heights (80x30x20; 80x30x30 ; 130x30x20; 130x30x30) - Four fixed actuating lugs at intervals of ...

Measuring rate: 500 Hz

Magnetic sensor for T-slot, series SL, REED N.O., 2 wires, no LED, 0/250 Vac/dc, 1 A, flat PVC cable 2x0.14mm2, 2.5 metres

Measuring rate: 100 kHz

Magnetic sensor for C-slot, 0/10 Vdc analog output, sensitivity 5/35 G, 12/24 Vdc power supply, 0.2 A, flat PVC cable 3x0.14 mm2, length 0.3 metres with M8 connector with lock nut

Measuring rate: 100 kHz

Magnetic sensor for C-slot, series SS, 0/10 Vdc analog output, sensitivity 5/35 G, 12/24 Vdc power supply, 0.2 A, flat PVC cable 3x0.14 mm2, length 2.5 metres

Measuring rate: 200 kHz

... a direction- sensing Hall effect encoder with the powerful integrated index pulse and super accuracy resolution position and speed sensor system, all in to a single chip. The ASIC produces and processes ...

Measuring range: 0 mm - 133 mm

The M-12 design is indicated for valve position monitoring and for end stop checks on cylindrical hydraulics. These mini-sensors are applicable to valves, block cylinders, assemblies, and miniaturized ...

Measuring range: 50 mm - 5,000 mm

Linear position sensors with a profile design are contact-free and absolute measurement systems for the precise detection of one or more positions. They ...

Measuring range: 508 mm - 601 mm
Measuring rate: 500 kHz

... reserve channel if required. The triply redundant position sensor features three measurement sections with a 120º offset from each other which is housed in a single protective tube over which a position ...

Easy fit 'drop from the top' into a slot Versions with connectors or connection cable Moulded cable ensuring very good strain relief High protection rating for the requirements of harsh industrial environments

Exact switch point detection on short-stroke cylinders Precise position detection thanks to short travel distance Reliable detection of weak magnetic fields Easy fit 'drop from the top' into a slot ...

Flush in the T slot, no protruding structures With safecoated connector PTFE protective tube to prevent damage by weld splatter Easy fit 'drop from the top' into a slot Very short length for different cylinder profiles

Measuring range: 25 mm - 6,350 mm

... successor to our current fourth generation. The new sensors have higher resistance to vibration and high temperatures, are ready for Industry 4.0 and fit perfectly into existing applications. The new sensors ...

Measuring range: 50 mm - 3,000 mm

Temposonics® E-Series ET is the ideal solution for usage in hazardous areas and in high temperature applications with a small and compact housing. Global approvals: ATEX / IECEx / CEC / NEC Compact installation dimensions High ...

Measuring range: 25 mm - 7,620 mm

... the first linear position sensors in the industry to meet SIL 2 standards. In addition, they are fully compliant with NEC, CEC, ATEX and IECEx Class I, II, III Division 1, Division 2 ...

... in-cylinder linear transducer. This device is made up with a rugged design and is characterized as a high reliable device. It is equipped with an integrated transducer flange that is used for the conditioning of signals. ...

Measuring range: 25 mm - 100 mm

... product brand) is a Contactless In-Cylinder Linear Transducer that combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement transducer ...

... -state rotary position sensor that provides a dual linear output voltage proportional to absolute shaft rotation in either direction from a reference angle that works on the Hall-effect ...

Measuring range: 50 mm - 1,500 mm

The OMS2 linear sensor series are used in harsh environments who requiring a robust, contactless and flat sensor with a very long lifespan in 50 to 1500 mm. The high performance in terms ...

Measuring range: 50 mm - 4,000 mm

... cursor •Mounting via external flange (metric / inch) •Electromagnetic compliance EMC 2014/30/EU •RoHS 2011/65/EU The linear transducers are designed for an operating pressure of 350 bar with peak values of 500 ...

Measuring range: 30 mm

The Hall-Effect Linear Sensor LHK is optimal for the detection of small, dynamic movements in automatically regulated systems without loss of accuracy due to wear. Compared to other non-contacting ...

Adjustment by radial arm, with integral spring return - with two mounting holes to allow 20° case adjustment - electrical connection via three lateral leads 300 mm long.

... the restricted applications of potentiometric angle sensors. Typical applications: -Position feedback in servo-systems -Zero detectors -Pendulum weighing machines -Cam and butterfly flap positions -Twist ...

Measuring range: 0 mm - 15 mm

... optical light. Afterwards a CMOS linear sensor was added as the light-sensitive element to enable visual perception for workpiece position. These functions enable the K1G to detect small ...

Measuring range: 1,000 mm

Absolute position transducers for high dynamic positioning tasks. Inductive measurement principle, touchless position detection with free position markers; unlimited ...

Non-contacting NOVOHALL Singleturn Rotary Sensor in 36,5 mm all-metal housing. Analog and digital interfaces. Different versions in solid or hollow shafts and heavy-duty.

Non-contacting NOVOHALL Multiturn Rotary Sensor in 36,5 mm all-metal housing. Analog and digital interfaces. Different versions in solid or hollow shafts and heavy-duty.

Magtrol's line of Displacement Transducers offers a mean of contactless measurement of the absolute piston position that is in hydraulic and pneumatic cylinders. It is usable in many applications. Device ...

... is between 30° and 120°. The measuring principle is non-contacting (rotating magnetic field over hall-sensor). The system is short circuit-proof (with unlimited short circuit duration). The angle sensor ...

The angular measuring range is best to measure degree between 30 degree to 120 degree. It is useful and beneficial to use and it has no mechanical stop. It is automatic and comfortable to use. The are many benefits of angular measuring ...

The 424Z Axial Angle Sensor, manufactured by Elobau®, features an angular measuring range from 20° up to 120° through a non-contacting type measurement principle(rotating magnetic field over hall sensor). ...

Measuring range: 45 mm - 60 mm
Measuring rate: 450, 45, 4.5 Hz

... assembled by Solartron Metrology, is a laser triangulation position sensor that features a 15 mm measurement range with 45 mm offset. This device is capable of connecting to other Solartron probes and ...

Measuring range: 2 mm - 200 mm
Measuring rate: 40 kHz

The Orbit® LTH, manufactured by Solatron Metrologym is a laser triangulation unit for an accurate measurement. It consist of 0.02% F.S. reading over 2 or 10 mm measurement ranges. The accuracy can reach up to +/- 0.4 μm with a 2 mm stroke. ...

Measuring range: 5, 1 µm

... flexibility of Solartron Metrology’s Orbit® 3 Digital Measurement System. For applications where a contact gauging sensor is unsuitable, this is a cost efficient non-contact ...

The QUAD series manufactured by Gentec-e company is a position sensing detectors that has a distinct QUADrant technology senses laser beam position with high resolution. It has an absorber ...

The Weld Quality Monitoring Sensor, manufactured by Japan Unix, is an automatic soldering position correction device. This equipment automatically recognize all soldering position and ...

Measuring range: 50 mm - 1,500 mm

... magnetostrictive linear position sensor manufactured by Eltra. It is mainly used for applications with mechanical stresses, shocks or high contamination are ensures by the solid size ...

Measuring range: 50 mm - 1,500 mm

EMSPB absolute linear magnetostrictive transducer with analog interface.Thanks to the absence of electric contact on the enclosure there is no issue of wear and deterioration during working life. Magnetostrictive ...

Measuring range: 50 mm - 1,500 mm

... magnetostrictive linear position sensor developed by Eltra. It features a digital RS422-SSI compliant output. This sensor has no electric contact on ...

... laser sensors by WayCon are useful for touchless position, or presence measuring of objects. These utilize the triangulation method for measuring. The laser beam hits the object as a small spot, and ...

The MAB Series is a magnetostrictive position sensor absolute precision developed by Waycon. It comes with distance and speed measurement. The unit is supplied with 10 m/s maximum displacement speed, ...

See COMMENTS.Digital magnetic tape measurement systems consist of a linear magnetic material and a reading head, which is fed without contact over the magnetic tape. This measuring principle is permanently ...

Measuring range: 50 mm - 4,000 mm

TR Electronic's LA Series of absolute magnetostrictive linear position sensors is generally utilized for mobile hydraulics-related applications, such as hydraulic cylinders and presses. ...

Measuring range: 50 mm - 4,000 mm

Linear absolute position measuring system or the magnetostriction is used for measuring linear movements in aggressive media. The device is housed in a stainless steel and pressure resistant ...

... build a 3D model of the inner surface. The series includes seven lines of models: RF603 - universal sensors with 2 to 1250 mm operating ranges, RF603HS - high speed sensors, RF609 ...

... models: RF603 - universal sensors with 2 to 1250 mm operating ranges, RF603HS - high speed sensors, RF600 - large-base and long range sensors, RF605 - compact sensors, ...