NPT fittings

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

... order to contain the head of a screw within the overall dimensions of the fitting.There are push-in fittings for metric pipes in the diameter range of 3 to 14, and push-in fittings for ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

Fittings and accessories for inch tubes and provided with UNF / NPT threads The range of Metal Work fittings and accessories gets widened by the introduction of fittings ...

Diameter: 0.15 mm - 10 mm

IntelliSense® Fitting IntelliSense® fittings are the easiest way to attach IntelliSense® sensors to a pneumatic actuator. A standard in-line push to connect or stainless steel female NPT ...

... 1/16, 5/64, 3/32, 1/8, 5/32, .170, 3/16, ¼ and 3/8 Tube Id •Thread size: 10-32(M)/(F), ¼-28(M), 1/16 NPT, 1/8 NPT/NPT(F), ¼ NPT, ¼ NPT(F), 3/8 NPT •Sharp, ...

Diameter: 0.06 in - 0.19 in

The Bulkhead stainless steel fittings by Bimba which are available in 0-32(F) and 1/8NPT(F) threads for fast connection in a pneumatic circuit. It is suitable to be the connector in installing materials ...

Diameter: 2 mm - 16 mm
Operating pressure: -100,000 Pa - 1,000,000 Pa

One Touch Fittings KQ2 - NEW •One-touch fitting, a general purpose PBT material •Applicable tubing from Ø 2 to Ø 16 •Threads, sizes: M, R, Rc, G, NPT, UNF, UNI from M3 to 1/2 •Operating ...

Diameter: 3.2 mm - 16 mm

... % •Compact and Lightweight reduced by 14 % •Applicable tubing from Ø 6 to Ø 1/2 •Thread, sizes: R, Rc, NPT from 1/8 to 1/2 •One-touch fitting type is available as standard •Sleeve lock mechanism is available.

- Thread NPT - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: ...

Operating pressure: -0.95 bar - 16 bar

- Thread NPT - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 ...

Operating pressure: -0.95 bar - 16 bar

- NPT thread, conical - Sealing NBR - Tapered thread - Material brass nickel-plated - Optimum through flow - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Not ...

Flexible Spiral Conduit Fittings NPT Liquid Tight Fixed & Swivel Cap nut:Brass with nickel plated Ring:PA6 Ferrule:Aluminium / brass Gland body:Brass with nickel plated O-ring:NBR Connection ...

Flexible Spiral Conduit Fittings Liquid Tight NPT Female Type Fixed & Swivel Cap nut:Brass with nickel plated Ring:PA6 Ferrule:Aluminium / brass Gland body:Brass with nickel plated O-ring:NBR Connection ...

Liquid Tight Spiral Conduit Fittings NPT With Cable Holder Male/Female Cap nut - : - Brass with nickel plated Clamping insert - : - PA6 Sealing ring - : - TPV Ring - : - Polyethlene Ferrule ...

Diameter: 6 mm - 32 mm
Operating pressure: 10 bar

... enable easy visual identification: light grey for the metric taper thread, anthracite for the whitworth pipe and black for the NPT thread. The SV Connector is built with various thermal properties to suit an array of ...

Diameter: 6 mm - 50 mm
Operating pressure: 150 bar

45° FEMALE / FEMALE ELBOW NPT - STAINLESS STEEL 304L - 316L model 5323

Diameter: 8 mm - 50 mm
Operating pressure: 150 bar

The 5325 product consists of 3000 lbs unions for SAE flanges, with threaded ends and welding ends. The unit provides a nominal diameter range of 8, 10, 15, 20, 25, 32, 40, and 50. Also, it features a weight range of 0.18 kg, 0.33 kg, ...

Diameter: 4 mm - 25 mm
Operating pressure: 400, 630, 100, 315 bar

MALE ELBOW UNION - DIN 2353 - STAINLESS STEEL 316 TI Inox 316 Ti - DIN 2353 EXAMPLE OF ORDER : 454173-46

Diameter: 0.13, 0.17, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi

... 32 UNF threads, 1/8-27 NPT or 1/4-18 NPT. The unique design (Patent #4,946,204) allows the fitting to swivel 360°. The snap type fitting is sealed with a Buna-N O-Ring. ...

Diameter: 0.13, 0.17, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi

... 32 UNF threads, 1/8-27 NPT or 1/4-18 NPT. The unique design (Patent #4,946,204) allows the fitting to swivel 360°. The snap type fitting is sealed with a Buna-N O-Ring. ...

Diameter: 0.09, 0.06, 0.13 in
Operating pressure: 0 psi - 125 psi

... quot;, or 1/8" I.D. flexible tubing. It is a snap-type fitting, which is then sealing using Buna-N, Ethylene Propylene (EPDM), or Viton o'ring. The mounting on the 1/4-18 NPT Swivel Fitting ...

Diameter: 19.6 mm - 23.4 mm
Operating pressure: 0 Pa - 60,000,000 Pa

... unsurpassed reliability. The system can also be connected under pressure up to 30 MPa on the nipple side and is available with G, R, NPT, UNF and metric threads. Couplings and nipples come with standard red dust caps ...

Diameter: 3 mm
Operating pressure: 0 Pa - 30,000,000 Pa

... well as automatic tool changing systems on machine tools. Finally, there are various thread connections available, but the NPT, Rc and G are available as standard, while the special models using other materials are ...

Diameter: 6 mm
Operating pressure: 0 Pa - 30,000,000 Pa

CEJN's Series 925 is constructed for industrial automations where engineering connections can lessen costly down times because of repair-work or mold and equipment alteration. The automated couplings accommodate quick, simultaneous connection ...

Operating pressure: 1,000 psi

The ANVER Fittings are manufactured for vacuum or average pressure line connections. It is compatible to use with ANVER wire through the support vacuum hose and worm gear drive hose clamps. This device operates within ...

Diameter: 4 mm - 100 mm
Operating pressure: -1 bar - 630 bar

... passage diameter kept from the inlet to the outlet of the fitting whatever the orientation. Available in several materials, sizes (standard from 4mm to 100mm passage) and connections: BSP, NPT, Metric,…

Diameter: 0.13, 0.25, 0.38 in

... and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and SAE AS 71051:1999 (NPT)

Diameter: 0.13, 0.25, 0.38, 0.5 in

... and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and SAE AS 71051:1999 (NPT)

Diameter: 0.13, 0.25, 0.38, 0.5 in

... and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and SAE AS 71051:1999 (NPT)

Diameter: 0.25 mm
Operating pressure: 1,160 psi

The push-in fittings of the PM line are manufactured according to the American Standards (inch Tubings and NPT threads). They are conceived to work up to 1,160 psi in central grease applications. The ...

Operating pressure: 1,160 psi

MM is our new line of misting fittings. C.matic are now using all their know-how and experience in high pressure connections for a completely new purpose. To create “Misting”. Water at 70 bar pressure is channelled through ...

Diameter: 4, 6, 8, 10, 12 mm
Operating pressure: 0 bar - 20 bar

... R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5 UNF NPT -- 60° American Standard Taper Pipe Thread 10-32UNF NPT1/8 NPT1/4 NPT3/8 NPT1/2

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 25 bar

Brass Rapid Fittings - RPC Male Straight The PNEUFLEX rapid fittings series are available in different shapes (studs, elbows, T), with threads Gas taper (BSPT) and Gas parallel (BSP). They can withstand ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 Pa - 2,000,000 Pa

... from BSPT and NPT 1/8 to BSPT and NPT 1/2. Nickel plated brass push to connect fittings are recommended for compressed air, pneumatic, instrumentation, circuit, lubricant and cooling ...

Diameter: 0.38 in - 2 in

As a flexible conduit and fittings manufacturer, we are proud to also provide a 90° waterproof plastic connector, made from PVC material and designed with an NPT thread. This tube fitting ...

... elements that screw on and turn independently, thus allowing the connection of rigid parts. Threads: -BSP TAPER BS 21 -NPT (ANSI B1.20.1) Materials: -Mild steel zinc plated -Stainless steel

Diameter: 0.5 in

Stainless Steel hex nipple ½” NPT x ½” NPT for ¼” sheath spring loaded with S.S. spring and “o” ring seal. Also available S.S. 316.

Diameter: 0.5 in

S.S. 304 hex nipple 1/2″ NPT X 1/2″ NPT for 1/4″ sheath. Other sizes available upon request. Also available in Stainless Steel 316.

Heyco-Flex™ Metallic Liquid Tight Conduit Fittings For use with Nonmetallic Heyco-Flex™ I Electrical Conduit Straight-Thru, NPT Hubs FEATURES - Cost effective die-cast zinc construction provides ...

... assembling Quick Twist Fittings into HF1 and HF2 Conduit and Tubing. Snap-in Hubs - Snap-in Fittings are UL recognized for use with Heyco-Flex II Tubing. - Suitable for dry location only. NPT ...

... for assembling Quick Twist Fittings into HF1 and HF2 Conduit and Tubing. Snap-in Hubs - Snap-in Fittings are UL recognized for use with Heyco-Flex II Tubing. - Suitable for dry location only. NPT ...

... Precision Brand® 90 Piece Grease Fitting Asst contains: 30 – 1/8″ NPT – straight; 5 – 1/8″ NPT – 45 degrees; 5 – 1/8″ NPT – 90 degrees; 30 – 1/4″-28 straight; 10 – 1/4″-28 ...

Diameter: 4 mm - 18 mm
Operating pressure: 0 bar - 10 bar

The flexible tube is pushed onto the integrated connecting sleeve of the 1A flexible tube con-nector. By tightening the knurled nut, the clamping ring presses against the flexible tube and fixes it in place. The connecting sleeve for ...

Diameter: 0.25 in
Operating pressure: 50, 110 psi

Approx Assembled Length” 1ft Kit includes: 1pc ea 1/8″ npt 1/4″ npt, 1/16″Nozzle,1/8″Nozzle,1/4″ Nozzle, 2pc 1/4″ Segment 5.5″ each Materials and Properties: Material: Acetal Copolymer Colors: Blue, ...

Diameter: 0.13 in

Description 40656 – 1/8″ NPT Female Pipe Coupling – Pack of 4