Plastic dampers

Load capacity: 0.1 N - 0.4 N

... damping direction of the smallest ACE FRT-E2 rotary dampers with plastic body is rotating on both sides. They can brake directly in the pivot point or linear through a gear and gear rack. ACE rotary dampers ...

Load capacity: 0.2 N - 1 N

... direction of the ACE FRT-G2 product family with plastic body is rotating on both sides. The small rotary dampers can brake directly in the pivot point or linear through a gear and gear rack. ACE rotary ...

Load capacity: 2 N - 3 N

... is either right, left or two-sided rotation. These ACE rotary dampers with plastic body can decelerate directly in the pivot point or linear through a gear and gear rack. ACE rotary dampers ...

Stroke: 1 mm - 51 mm

Industrial Buffer for Large Applications The Jarret Industrial Buffer utilizes the unique compression and shear characteristics of specially formulated silicone elastomers. These characteristics allow ...

... integrating the hinge, actuation and damping all in one high strength molded plastic device, Enidine Hinge Rotary Dampers bring many benefits to bin designs. Enidine Hinge Rotary Dampers ...

Elastomer buffers Shore 70A Material: Polyurethane. Version: Soft Shore hardness 70A ±5. Colour black. Note: Elastomer buffers are characterised by high load capacity, long service life and ...

Load capacity: 11 N
Stroke: 50 mm

... dampers for drawer damping turn heads thanks to the multitude of options for integration into customers' systems. Due to the high adaptability of our design, Zimmer is offering a wide range of dampers ...

Stroke: 50 mm

... vertically without special previous knowledge. Damper, furniture, hinge, drawers, sliding doors, flaps, soft close, push-to-open, opening comfort, movement systems, self-closing unit, fitting, retrofit damper, ...

Load capacity: 10 kN - 850 kN
Stroke: 10 mm - 3,000 mm
Diameter: 25 mm - 110 mm

... COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic ...

Load capacity: 10 kN - 2,000 kN
Stroke: 10 mm - 3,000 mm
Diameter: 55 mm - 200 mm

... shock absorbers, buffer, gas-pressure shock absorber: The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry sector. ...

Load capacity: 10 kN - 160 kN
Stroke: 10 mm - 2,000 mm
Diameter: 32 mm - 110 mm

Description of buffer spring, hydraulic shock absorbers, gas-pressure shock absorber: The COMPENSER® of the DC-series is an ideal hydraulic shock reducing element especially for the application field of storage technology ...

Bansbach’s Standard MC Damper device only contains oil elements. This apparatus features a design that allows a small slip whenever the piston rod is pulled out. It also showcases a push-in, push-out speed function. The ...

Thread length: 7 mm - 60 mm
Diameter: 5 mm - 47 mm
Height: 6 mm - 100 mm

VIBRATION DAMPERS The good quality of ELITESGOMMA’s shock absorbers derives from many years of experience and continuous improvements. No any shock absorbers derives from a easten production ...

Stroke: 20 mm - 30 mm
Thread length: 14 mm - 18 mm
Diameter: 25 mm - 40 mm

WAISTED VIBRATION DAMPERS ELITEGOMMA's excellent vibration damping quality comes from many years of experience and continuous improvements, no any vibration dampers comes from Eastern productions or ...

Thread length: 16 mm - 70 mm
Diameter: 20 mm - 110 mm
Thread diameter: 6 mm - 14 mm

CYLINDRICAL SHOCK ABSORBERS FEET The cylindrical shock absorbers feet are applied in every sector that needs a support base and has to find an alignment with the land; these are generally used as ...

Viscoelastic shock absorbers for energy dissipation in large scale telescopic covers working in horizontal and frontal positions. Made of polymer of a special P.E.I. formulation, it is manufactured ...

... smallest ACE FRT-E2 rotary dampers with plastic body is rotating on both sides. They can brake directly in the pivot point or linear through a gear and gear rack. ACE rotary dampers are ...

Load capacity: 1.6 daN - 16 daN

Shock and vibration mount in damped silicone for tension and compression use. ► VHDS elastomer able to carry loads under compression and traction. ► Pedestal, washer and shaft in 18/8 stainless steel.

Load capacity: 3.6 N - 9.8 N
Stroke: 10 mm
Thread length: 63 mm

IAAS has a dial that can set 12 steps of shock speed ranges and it improved by wider damping ranges. Improved energy capacity over 200% and effective weight range become wider than before. FEATURES All threaded body outside helps ...

Great improvement of durability SRX ie the product with a special blending method of various rubbers. It is resistant to large deflection (35%) and high load. Permanent set is limited. It is very cost effectwe compared to coil springs ...

Load capacity: 5.5 N
Stroke: 7 mm
Thread diameter: 10 mm

• KMA model is adjustable type so you could control the damping force according to impact velocity. KMA model has the 12 step range to rotate the dial 0” to 300” so it is possible to get the fine tuning. • The new KMA model has larger ...

... Product type: Cellular plastic buffer / Impact buffer Product description Impact buffers. End-stop solution. Version with central mounting Version with base plate (made of ...

Stroke: 1 nm - 4 nm
Diameter: 20 mm
Height: 45 mm

... of the silicone oil inside the damper varies according to the temperature. When the temperature returns to normal, the torque will return to normal as well. 5.The max rotation angle of the vane damper ...

BUFFER WITH PIN D = to attach the buffer it is necessary to carry out the borehole 0,1 - 0,2mm larger. Chamfer the hole General measuring tolerances (DIN ISO 3302, section 2 ...

Diameter: 12 mm

Stacking Chair Buffers from Sinclair & Rush. Our Stacking Chair Buffers simply push into the pre-drilled opening on the back of standard conference/academy chair legs to prevent damage to the coated ...

The Megamat line 500 is made of panels manufactured with fibers and granules of SBR and EPDM rubber. The thicknesses available are 10, 20, 30, 40 and 50 mm; the panels can be overlapped, combining thicknesses up to 100 mm height in order ...

Stroke: 15 mm

... self-extending air-cushioned sound-absorbing for 10 mm drill hole Model WAS-Z 0950 without own reset air-cushioned Material: plastic RoHS - compliant: Directive 2002/95/EC

... andelectromagnetic emission absorption by Joule effect. Several materials are available: wide range absorption foam, absorber orelastomer base absorbers with low thickness and frequency tuned. Our ...

... suitable for your application. And we can customize the damping torque and behavior depending on every applications. TOK dampers are all customizable.

CONICAL BUFFERS Tailor made application with machine finishing. BUFFER For aluminium processing field. BUFFER Made with polyurethane bonded to a metal plate.

Material: ABS / POM Colour: black Avaiable others gear wheel combinations. All dimensions are in mm.

Load capacity: 60 N - 120 N

RD 18 - the proven damper Used millions of times The design with the exterior plastic housing ensures a very favorable price-performance ratio. Our proven standard damper has been ...