- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Plastic flow meter
Plastic flow meters
Process temperature: -20 °C - 90 °C
Precision: 0.3 %
ULTRASONIC FLOW METER AI.4FPC-SS Processor control unit and flow rate level converter including display Ultrasonic level sensor included Kit to be combined with a parshall model AI.FPC-SS ...
ASIT ITALIA
Volumetric flow rate: 11 m³/h - 1,000 m³/h
... waste water, open channels, rainwater, industrial water Minimum flow rate: 11.0 m3 / h - 3.05 l / sec Maximum flow rate: 1000 m3 / h - 277.77 l / s Materials: Glass fiber reinforced plastic, ...
ASIT ITALIA
Volumetric flow rate: 12.6 m³/h - 1,440 m³/h
... waste water, open channels, rainwater, industrial water Minimum flow rate: 12.6 Vm3 / h - 3.5 l / sec Maximum flow rate: 1440 m3 / h - 400 l / sec Materials: Glass fiber reinforced plastic, ...
ASIT ITALIA
Volumetric flow rate: 1 l/min - 30 l/min
Process temperature: -25 °C - 120 °C
Process pressure: 20 bar
This type of flowmeter is improved to measure and observe low and normal liquid flows and are suitable for measuring sensitively. Magnets mounted on each turbine blade inside produce a "Pulse" pulse each ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Volumetric flow rate: 90 l/h - 350,000 l/h
Process temperature: 0 °C - 50 °C
Process pressure: 16 bar
Plastic Body Turbine flowmeters can calculate the total flow precisely without causing pressure loss. These devices can also send instant flow information thanks to the ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Volumetric flow rate: 3 l/min - 120 l/min
Process temperature: -25 °C - 120 °C
Process pressure: 20 bar
This type of flowmeter is designed to measure and observe low and normal liquid flow and is suitable for measuring sensitively. Magnets mounted on each turbine blade inside produce a "Pulse" pulse each ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %
The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. ...
Holykell
Process temperature: 0 °C - 150 °C
Precision: 0.5, 1 %
Repeatibility: 0.2 %
The portable ultrasonic flow meter is designed based on the flow measurement method of the clamp-on ultrasonic flow meter. The measurement process does ...
Holykell
Volumetric flow rate: 0.1 l/s - 27,777.8 l/s
Process temperature: -20 °C - 80 °C
Precision: 0.25, 0.5 %
... measuring flow through an open channel flow meter is to measure the height or HEAD of the liquid as it passes over an obstruction (a flume or weir) in the channel. Application : ● ...
Holykell
Volumetric flow rate: 0 l/min - 30 l/min
Precision: 1 %
... piston flowmeters with Bios DryCal® technology in the DC-Lite and DC-2 digital flowmeters. They allow calibration of air sampling pumps, rotometers or other flow instruments. Depending on the model, ...
Volumetric flow rate: 0 l/min - 30 l/min
Precision: 1 %
... technology in the DC-Lite and DC-2 digital flow meters is available in the Defender 510The Defender 510, 520 and 530+ calibrators make it easier than ever to calibrate air sampling pumps, rotometers or ...
Precision: 1 %
... verify gas flow rates in the field or laboratory with an accuracy of ± 1% for standard temperature and pressure readings and ± 0.75% in volumetric flow mode. Available with flow rates ...
Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar
... consumption of individual machines and analyze your leakage flows with just one measuring device. Advantages of the VA 525 flow sensor: - Measurement of mass flow rate, output of ...
Process temperature: -20 °C - 80 °C
AFM-3 Flow Meter Specifications Usage:For testing liquid flow rate, Commonly used in smart toilets, drinkingfountains, etc. Parameters - AFM-3 Rated voltage - 5 VDC Rated ...
Volumetric flow rate: 0.2 l/h - 220 l/h
Process temperature: 0 °C - 65 °C
Process pressure: 0 bar - 6 bar
... relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the flow rate on the scaled measurement ...
Volumetric flow rate: 1 l/min - 75 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 0 bar - 6 bar
... relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the flow rate on the scaled measurement ...
Volumetric flow rate: 2 l/min - 40 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 0 Pa - 600,000 Pa
... – Tmax = 65°C Variable area flow meter for the measurement of both liquid and gaseous fluids. The mounting is vertical with flow from bottom to top. • - Unbreakable. • - Body made ...
Volumetric flow rate: 6.5 l/h - 480,000 l/h
Process temperature: -10 °C - 90 °C
Process pressure: 10 bar
... also optionally be used for flow monitoring if equipped with one or more contact switches. Areas of application: Thanks to their plastic measurement cone, Trogflux-series float-type flow ...
MECON
Volumetric flow rate: 0.9 m³/h - 6,627 m³/h
... flumes made of plastic (PP) - Factory calibrated dimensions - Reliable measurement with ultrasonic level transmitter - Level transmitter can be used for all flume types - Displaying of flow ...
Process temperature: -40 °C - 170 °C
Precision: 1, 3 %
Repeatibility: 0.15 %
... course! The FLUXUS G721 CA compressed air flow meter is thus the ideal solution. FLEXIM’s non-invasive clamp-on ultrasonic technology is unique in that it can be applied to measure compressed air ...
Volumetric flow rate: 0.5 l/h - 60 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 0 Pa - 400,000 Pa
Corrosion-resistant materials Easy to install Easy measuring tube replacement Limit switch optional Flow meters perform different tasks in conditioning systems for gas analysis. The typically quite ...
Volumetric flow rate: 0 l/min - 700 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 10 bar
The MIK Model is a plastic electromagnetic flow meter developed by Kobold. It comes with G ½ to G 2 ¾ male connections and an analog output. This unit is built with stainless steel and ...
KOBOLD INSTRUMENTATION
Volumetric flow rate: 0.8 l/min - 2,032.8 l/min
Precision: 2 %
... to unscheduled flow events. One featured product from our flow line, the Ultrasonic Flow Meter Master Valve Assembly (UFMV-A), is the ultimate tool for any retrofit ...
Volumetric flow rate: 1.5 l/h - 1,000 l/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Flowmeter in plastic for liquids and gases wide measuring range materials to suit application optional analog output Operation: The flowmeters type KM-165, KM-185 and KM-200 ...
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar
Flowmeter in plastic for liquids and gases wide measuring range materials to suit applications optional analog output Operation: The flowmeters type KM-335 and KM-350 operate ...
Volumetric flow rate: 1 m³/h - 9,048 m³/h
Process temperature: -40 °C - 85 °C
Precision: 0.5 %
... LEKTRA presents a new type of electromagnetic flowmeter with plastic sensors: RKmag. Because of its particular inner shape the mounting of the unit requires no straight pipe lengths before and after the ...
Volumetric flow rate: 0.1 l/min - 20 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 25, 20 bar
The PVDF Clamp flowmeter is designed to perform an easy and fast exchange of the wetted parts. Key characteristics: Infrared (IR) turbine rotor reflection results in accurate and repeatable flow ...
Equflow BV
Volumetric flow rate: 0.1 l/min - 20 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 25, 20, 10 bar
The PVDF Tubeholder flowmeter is a larger sized, firm and stable model to exchange the wetted parts. Key characteristics: Infrared (IR) turbine rotor reflection results in accurate and repeatable flow ...
Equflow BV
Volumetric flow rate: 0.1 l/min - 2 l/min
Process temperature: -15 °C - 130 °C
Process pressure: 25 bar
... applications. The basic flowmeter consists of two major assemblies: • A sterilizable, interchangeable/disposable rotor assembly including all wetted surfaces. • A permanent, fixed electronics/mounting ...
Equflow BV
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 10 bar
made of Alu/plastic, ca. 20–120 l/min*, 10 bar*, on both sides fem. threads 1″, for viscosities from 30–2000 mPas*, especially suitable for lubricants, heating oil/diesel, anti freezing liquid (undiluted) and vegetable ...
Volumetric flow rate: 0 m³/h - 6 m³/h
Process temperature: -25 °C - 70 °C
GAS SMART METERS SSM-U4 Ultrasonic Smart Gas Meter A Modular design concept combined with the adoption of consolidated open standard protocols have been the key to success of Pietro Fiorentini’s smart ...
Process pressure: 10.3 bar
Agrimag is the Arkon electromagnetic flowmeter for agricultural applications. It is a low-cost plastic electromagnetic flowmeter that is powered by 6 standard AA batteries (battery life ...
AgrimagP is the new plastic flowmeter with power supply and output suitable for multiple applications. It is user friendly, low cost plastic electromagnetic flowmeter. Same as Agrimag, ...
Volumetric flow rate: 6.3 l/min - 30 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 0.2 bar - 10 bar
... air entry causing inaccurate measurements, the flow meter is sited upstream from the solenoid valve. The flow meter's output are pulses, where the frequency or the ...
Volumetric flow rate: 50 us gal/min
Process temperature: 2 °C - 99 °C
Process pressure: 200 psi
... characteristics and/or options: Designed for monitoring water add on concrete trucks Plastic end connections with Brass Insert Batch (total) mode or rate for continuous mix. Solid state relay can ...
Process temperature: -30 °C - 160 °C
Precision: 1 %
... ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance Introduction SUP-2100H ...
Volumetric flow rate: 0.5 l/min - 750 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Body material - Transparent acrylic Connection material - Polypropylene, ABS ( on request ) Float material - Stainless steel Seal material - Silicone, FPM ( on request ) Thread connection - 1/2″ – 3/4″ – 1″ – 1 1/2″ ...
ELETTROTEC s.r.l.
Volumetric flow rate: 0 m³/h - 200,000 m³/h
Process temperature: -20 °C - 50 °C
Process pressure: 2,000 Pa
... measurement probe. Usage The DPT-Flow-Batt is an on-site display designed for air handling units to measure the air flow on centrifugal fans. The DPT-Flow-Batt can also be used in ...
Volumetric flow rate: 0.1 l/min - 15 l/min
Process temperature: -25 °C - 125 °C
Process pressure: 10 bar
... transistor outputs are available on each flow meter. NSF Certified for Use in Food and Beverage Production Turbine Flow Measurement Low cost PVDF or PP body 1- 2% FSD Sapphire ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining