Insertion length: 120 mm - 420 mm
... Product description
The NIR backscatter sensor EXcell 251 is a high-precision digital NIR
probe for monitoring production processes in the biotech, food and pharmaceutical industries. Its 12 mm stainless-steel rod design and ...
Insertion length: 70 mm - 110 mm
... Product overview
EXcell 261 is a digital NIR backscatter sensor designed for continuous biomass monitoring in biotech, food and pharmaceutical fermentation processes. It mounts to DN25 weld-in sockets via a G1 1/4" thread. Construction ...
Insertion length: 120 mm - 425 mm
... measured-value display.
Installation / Process integration
The
probe installs via a PG13.5 process thread; installation dimensions match a standardized pH
probe allowing use of compatible retractable ...
... high-performance AC/DC current probe belonging to the Micsig CP2100 series AC DC current probe family. This CP2100B current probe features an impressive bandwidth of DC~2.5MHz, making it a powerful 2.5MHz ...
... high-performance high frequency AC DC current probe designed for precise current signal analysis across a wide range of applications. As part of the Micsig precision current probe lineup, this 50MHz current probe ...
... is compatible with other models like DP700 differential probe, DP1500 high-voltage probe, DP3000 differential probe, and DP7000 100MHz probe, each tailored for specific applications. ...
... WEUVCOD SMART PROBE It is a COD intelligent electrode with a built-in cleaning brush, which uses RS485 communication interface. It simultaneously measures the absorbance of the water body at 254nm and 546nm, and can be converted into ...
... WEUVCOD SMART PROBE Spectral method organic matter sensors rely on the absorption effect of organic matter on ultraviolet light, and use the 254nm spectral absorption coefficient SAC254 to reflect the important measurement parameter ...
... TECPEL DP100 Oscilloscope 100MHz differential probe Product ID: DP-100 Differential Probe Model: DP-100 ( 6.5KVp-p / 100MHz ) The DP-100 Differential probe provides a safety means for measuring differential ...
... input signal to a low voltage ground referenced signal for display on any Oscilloscope. The product FET input differential probe provides a safe means of measuring circuits with floating potentials up to 1000 V ( DC+ peak AC ) from ground ...
... These are LF-190E, LF-210E and LF-250 by Tecpel Co is an Oscilloscope probe which is designed for wide range of applications. For LF-190E, it has a 60 MHz rating and comprises of item 10 and item 1. The item 1 has a rating of DC~3MHz(+/-1dB) ...
... plants with a big steam generating system, and many steam traps. Steam traps control was usually done by ear with a contact probe used as a stethoscope. LKS1000-V.3+ is the 1st ultrasonic detector to have a dedicated steam traps ...
... Flexible probe 400 mm to detect compressed air, gas, vacuum leaks. This probe is a really handy tool added to the LEAKSHOOTER to find precisely leaks on a comressed air network. Once detected at a distance, thanks ...
Insertion length: 610 mm
... Three current ranges: 30A, 300A and 3000A. Two output sensitivities (300mV and 1V), versatile for measuring instruments. Input protection up to 600V. Suitable for any electrical system. Wide bandwidth, low phase shift. Low battery indication. ...
... Three current ranges: 60A, 600A and 6000A. Two output sensitivities (600mV and 1V), versatile for measuring instruments. Input protection up to 600V. Suitable for any electrical system. Wide bandwidth, low phase shift. Low battery indication. ...
Instrumentys
Instrumentys
Instrumentys
... standards and benefits FORT's expertise and knowledge. GR guide tube is a leading tool for video probes with a diameter of 22mm. It can be used with all the probes of big lengths and also allows them to get some tools ...
... The GR 22 C guide tube with a camera and 5 LEDs allowing to channel some tools such as grabbers; magnets, hooks or lassos. Different lengths are available and also different stiffners which allow to enter every application. Very powerful LEDs With ...
... inside solenoids and general magnetic fields. The length of probe can be customized; the array probe can be customized Can add a temperature sensor inside the probe Combination display ...
... This stainless steel liquid probe features a rigid stem with a flat tip ideal for high accuracy temperature measurement in a wide variety of laboratory applications. Response time is less than 4 seconds. With a measuring range going ...
GESA TERMOMETROS
... This hand held liquid probe features a rigid, stainless steel stem with a flat tip. The probe is suitable for high accuracy temperature measurement in a wide variety of laboratory applications when used with the PRECISION ...
GESA TERMOMETROS
... fast response probes with reduced tip are suitable for semi-solids and liquids incliding soft rubber or plastic. With a measuring range going from -75 to 250ºC and a 1m long straight or coiled cable, these type K thermocouple probes ...
GESA TERMOMETROS
... Description Ultrasonic probe for non destructive test (NDT) on concrete foundation poles. SUF52FRF model is an ultrasonic high efficiency active transducer which can be used both as emitting (TX) and as receiver (RX) probe. ...
M.A.E. S.r.l.
... THERMAL CONDUCTIVITY PROBE ON SAMPLES, LENGHT 45 CM Description CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical and fast ...
M.A.E. S.r.l.
... Description Ultrasonic probe for non destructive test (NDT) on concrete foundation poles. SUF63FRF model is an ultrasnoci high efficiency active transducer which can be used both as emitting (TX) and as receiver (RX) probe. ...
M.A.E. S.r.l.
... measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-618 Current Probe is designed to permit field intensity meters, spectrum analyzers, and ...
A.H. Systems
... measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-619 Current Probe is designed to permit field intensity meters, spectrum analyzers, and ...
A.H. Systems
... current traveling through the probe window area. For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current ...
A.H. Systems
... RF, microwave and pulse probes allowing cost-effective fingertip browsing of broadband signals up to 5 GHz (10 Gb/s). With less than 0.4 pF tip capacitance and ground-referred loading of 220 Ω to 910 Ω, the PicoConnect probes ...
Pico Technology
... Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer probe ...
Probes, coupled with a spectrometer, measure reflection, and fluorescence in solids, liquids, powders.
Ocean Insight
... Radiometric probe for outdoor use for measuring IRRADIANCE in the UVA spectral range (315…400 nm). Supplied with Calibration Report. On request CPM12AA4… cables with 4-pole M12 connector. The LPUVA02 radiometer measures the broadband ...
Delta OHM
... For use with KANE250/425/450/455 Combustion probe with flexible shaft and integral thermocouple ...
... coaxial probes must be selected to complete a set. Technical Specifications • - Coaxial probes are ideal for precision Resistance Measurements in the tightest spaces • - 1.5 mm (0.06″) Diameter Pin • - Cable Length: ...
TEGAM
... Subtitle
High Voltage Ammeter
Probe
Highlights
- Primary distribution probes for CT ratio testing
- Supplies an analog output for waveform analysis
- Fiber Optic Isolation cable
... DIFFERENTIAL PROBE P9000 Easily Connect to Hioki Memory HiCorders and HiLoggers for High Voltage Testing Overview • - Compact probe for CAT III 1000V environments • - Wave mode: Observe instantaneous waveforms • ...
HIOKI EUROPE GmbH
... ATR tunnel cells provide a high degree of analytical accuracy. They are ideal for the chemical analysis of liquids in the IR range. ...
Hellma GmbH & Co. KG
... Type 50GI is a sound intensity probe for direct connection to signal analyzers or data acqusition devices with IEPE inputs. The probe includes a pair of phase-matched prepolarized precision microphones which meet the ...
G.R.A.S. Sound & Vibration
... X1 Oscilloscope Probe Body. Cable type : Coaxial. Color : Black / yellow. Standard length : 120 cm (47 ''). Detail : Attenuation X1. Input impedance 45 pF. Bandwidth 25 MHz. Rise time 14 ns. ...
ELECTRO PJP
... Used to locate buried plastic Water Pipes, Gas Pipes and any other non-magnetic utility, Sondes are self-contained transmitters that are used with our cable and pipe locators. Sondes are typically attached to a Flexrod, pushed along the pipe, and the ...
Radiodetection
... An advanced Langmuir probe for plasma diagnostics Routine monitoring of the I-V plasma characteristic by the Hiden ESPion probe gives direct information relating to plasma stability and reproducibility. Automatic real-time ...
... PC • Dynamic energy discriminator button • Telescopic pole with H*(10) ambient gamma dose equivalent rate measurement probe • Gamma dose rate measurement up to 10 Sv/h (1000 rem/h) • Energy-compensated Geiger Mueller detector • ...
... CarboProbe HT probe can handle temperatures up to 1700°C. All parts exposed to high temperatures are ceramic or platinum. This probe has a robust construction with a 15 mm diameter ceramic tube that protects the internal ...
ECONOX
... optical probes contain a diffusor for scattering incident light. Behind the diffusor is the entrance facet of the optical fiber, with which light is coupled into the spectrometer. Applications For general applications we recommend ...
... Mounted on workpiece surface or machine table, LED lamp illuminates immediately when the cutting edge touches the sensor plate and the position is detected. For conductive materials BASE MASTER For all materials BASE MASTER GOLD BASE MASTER MICRO ...
BIG DAISHOWA
... Real Tech’s Ammonium Probe provides rapid real-time in-situ measurement of ammonium in water or wastewater. The sensor uses ion selective electrode (ISE) measurement technology to monitor ammonium continuously. The integrated automatic ...
Real Tech Inc.
... NEW! Second generation Hach LDO sensor technology. Since 2002, Hach has established itself as the premier provider of luminescent dissolved oxygen (LDO) technology, and only Hydrolab Series 5 sondes feature Hach LDO technology – designed, manufactured, ...
... hard surfaces). Each probe is fully manufactured in-house according to highest possible standards, carefully calibrated in factory (at several reference points) in order to provide maximum trueness. Additionally, all eddy current probes ...
... MFI magnetic field indicator – SAMFI Octagonal probe for checking the orientation of magnetic fields, quality of dry and wet magnetic powders and magnetization. Complying with standard ASME-ASTM-MIL-AMS. ...
... of a flexible Rogowski coil and an electronic module. The sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or ...
AEMC Instruments
... This compact, portable device allows highly accurate testing of multiple parameters in one sample and is suitable for a wide range of applications: Long-life sensor – replaceable sensor with gel-based electrolyte to minimise maintenance Wide dynamic ...
... non-contact sampling options are available for the PhAT probe head to enhance sampling flexibility. For on-line applications where cleanability between batches is paramount, an optional stainless-steel bodied probe is ...
Kaiser Optical Systems SARL
... Cail & Fletcher Hydrotrac probe is a microwave probe which provides a direct reading of both Brix and temperature. It brings a range of functionalities more extensive than the Cail & Fletcher Monotrac probe. Ultimate ...
Fives Sugar | Bioenergy
Insertion length: 300 mm - 1,800 mm
... information
ZIROX flue gas
probes SS31/SS31H are robust oxygen sensors for lambda determination in large-scale combustion plants and for measuring the oxygen partial pressure in furnace atmospheres. The
probes ...
ZIROX Sensoren & Elektronik
... 10 is a magnetic settlement probe designed to accurately detect the position of magnetic rings along the settlement column. Equipped with a portable battery-powered control unit, it is ideal for field use. The probe ...
Tecnopenta SRL
... SZ-2059-01 Drinking Water Chlorine Sensor 1,Product inspection Open the package carefully and check whether the instrument is damaged or the accessories are complete. If any abnormality is found, please contact the dealer or our company immediately.Under ...
the best suppliers