Pumps

Flow: 45 l/min - 90 l/min
Pressure: 0.06, 0.3 MPa
Power: 0.75 kW

... The BT90 pump is applicable to gasoline, kerosene, diesel and some compatible fuel. Its inside construction includes Air Separator, Check Valve, By-pass Valve, Float Valve, Overflow Prevention Valve, Inlet and Outlet Filter, etc. Features ...

Flow: 38 l/min
Power: 250 W
Length: 132 mm

... Electric centrifugal pump with high-quality, impact-resistant plastic housing. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), GTL, HVO and R33 Self-priming with integrated siphon protection Foot filter Thermal ...

... centrifugal pump. Submersible Pump-Motor is used drainage, sewage pumping, general industrial pumping and slurry pumping. Submersible Pump-Motor manufactured in India, China, European Origin available. · ...

Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in

... Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in ...

Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually operated ...

Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg

... water resistant. The pump can deliver a pump pressure of 3 bar, which makes it suitable for use with in-line filters, and an underpressure maximum of 1 bar. It is a self-priming pump. Even when the ...

Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm

... Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 ...

Power: 0 kW - 55 kW

... Hydraulic pump motor unit - for applications where the system requires hydraulic flow. The AC Hydraulic motor pumps are made up of an AC Motor driving a Hydraulic gear pump assembly. AC Motors are either ...

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline. ...

... Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ultranonic level ...

Pressure: 700 bar

... • Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • Safe to use ...

... The Bigas Alsina, S.A. blood pumps, are designed to allow the transport of this waste material in an efficient way, avoiding all those problems that ussualy arise inside the pumps, due in most cases because are not prepared ...

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump is the ideal choice ...

Flow: 130 l/min
Pressure: 0.3 bar

... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing rubbers On ...

Pressure: 4 bar - 8 bar

... Piston metering pneumatic pump with 1.2L and 4L transparent oil tank Piston metering pneumatic pump, air pressure 4-8bar, 0-0.04ml/stroke; ...

Flow: 0.01 l/min
Pressure: 20 MPa
Power: 24 W

... cartridges. ● Be careful not to let air enter the pump when replacing the cartridge. ● After greasing or after replacing the cartridge, be sure to open the air vent plug and vent the air inside the pump. ...

... Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small evaporator ...

Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW

... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection purposes only. Operable ...

Flow: 20 m³/h - 40 m³/h
Pressure: 0 MPa
Power: 4,000 W

... ◆ The water powder mixing pump is sufficiently blended with a high-speed rotating impeller to deliver the desired mixture. ◆ Uses: Suitable for milk powder, whey powder, paste powder, etc., etc., and liquids are mixed with liquids. The ...

Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW

... slurry and affects the pumps by increasing wear and tear. Landia has developed special materials to extend the pump's lifespan significantly in comparison with a standard pump. Landia's DG pump ...

Flow: 0.2 l/min
Pressure: 500 bar

... Name：Supercritical Fluid Preparative scale CO2 extraction Equipment No：SE-600-10000C Info： Application Focuses 1. Chemistry labs 2. Research institutes 3. Chemical/ Food factories 4. Sample extraction Features 1. Easy operation 2. Space saving 3. Flexible ...

Flow: 160 l/min

Flow: 1.3 l/min - 450 l/min
Pressure: 35 bar - 120 bar

... Description PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting. PH pump range is very large and allows covering the complete grouting range, from fine ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... petrochemical products. The pumps of our manufacture present an advanced model of the pump NTsI-F-100 (НЦИ-Ф-100) previously produced in the post-Soviet countries. This is a centrifugal semi-submersible pump ...

... V Series High Pressure Pump System - Internationally Applicable 1. Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, to control ...