Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation o No pump ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
... IE3 electric pump VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial ...
Flow: 0.5 l/s - 12.5 l/s
Pressure: 0 bar
Head: 0.99 m - 18 m
Electromechanical assembly in B10 bronze, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals with oil lubrication. Oil bath motor.
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
... KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two gear shafts in the ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, especially at high ...
KRACHT GmbH
Flow: 486 l/min - 2,568 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -20 °C - 200 °C
... Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also permit subsequent ...
KRACHT GmbH
Flow: 19 l/min - 660 l/min
Pressure: 7 bar
Head: 9.5, 9 m
... and severe process conditions, such as the manufacturing of photovoltaic solar panels, power stations, acids, solvents and petrochemical facilities. The Pure range is machined from a single block of virgin grade PE or ...
Verder Liquids
Flow: 0 l/min - 19 l/min
Pressure: 0 bar - 7 bar
Head: 1 m - 9 m
... is a compact, high efficient air operated double diaphragm (AODD) pump, produced from one-piece solid pure PE or PTFE. Suitable for small transfer/drum emptying or as a basic dosing pump. ...
Verder Liquids
Flow: 0 l/min - 28 l/min
Pressure: 0 bar - 7 bar
Head: 2 m - 9 m
... is a compact, high efficient air operated double diaphragm (AODD) pump, produced from one-piece solid pure PE or PTFE. Suitable for small transfer/drum emptying or as a basic dosing pump. ...
Verder Liquids
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated for filling off high ...
Bürkle
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction that is capable ...
Bürkle
Flow: 14 l/min
... br>With commercially available reusable pumps, there is a risk that the liquid to be filled will be contaminated by the pump - especially if the pump is used for different media or containers and no professional ...
Bürkle
Flow: 0.3 m³/h - 90 m³/h
Power: 0.55 kW - 37 kW
... Confectionery
industry, baking
industry,
chemical
industry, etc.
Advantages and features
1.HIGH VISCOSITY MATERIAL FEEDING
PUMP
...
Flow: 3 m³/h - 90 m³/h
Pressure: 0.85 bar
Head: 10 m - 80 m
... The sine
pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...
Flow: 5 m³/h - 30 m³/h
Head: 10, 15, 18, 20 m
Power: 1.5, 4, 5.5, 7.5 kW
... CIP self-priming
pump adopts acid-resisting stainless steel (AISI 316) in valve body,
which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement
pump, ...
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 187 cm
... -pressure pump should be repaired every six months to prevent working with illness. During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... integral pump head, has optimized the pressure chamber structure. The pump type can meet the working pressure of 14-80 MPa and the flow rate of 93-254 L/min. Can be used for large diameter pipeline cleaning, powder metallurgy, ...
Tinajin Harvest
Flow: 246 l/min - 510 l/min
Pressure: 40 bar - 240 bar
Power: 30 kW - 110 kW
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 0.00001 l/min - 0.01 l/min
Pressure: 60 MPa
Width: 280 mm
... must be ordered together with the pump. With a flow rate of 0.001-10.00 ml/min and a pressure limit and 60 MPa is this pump suited for analytical applications in liquid chromatography. The pump is designed ...
Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m
... VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining the working pressure in open circuit systems. Developed ...
Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and keeps long life. 3. Compact & robust structure for saving space and for easy installation. ...
Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m
... Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps Displacement ...
FLUIMAC
Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 10 m³/h
Pressure: 4 bar
... following industries: paint, dairy and beverage, meat and fish processing, pharmaceutical and cosmetics, waste water and water treatment, chemical and petrochemical industries, ...
Flow: 60, 125, 330, 570 m³/h
Pressure: 8 bar
Head: 0 m - 80 m
... required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were turned down to much lower air pressure in an attempt to save energy, the ...
Flow: 135, 120 l/min
Head: 8, 7 m
Power: 700, 600 W
... Pump marking: ATEX 94/9/CE ATEX II 2G IIB T3. Technical data Pump compliant with ATEX standard 94/9/EC ATEX II 2G IIB T3 Max. viscosity: ...
Pompes Japy
Flow: 3 m³/h
Head: 0 m - 6 m
Power: 0.25 kW
... Electric vane pumps Descriptive Atex Pump marking: II 2G Ex d IIC T4. Technical data: Transfer units for potentially explosive liquids: petrol, kerosene and diesel Bare DC pump ...
Pompes Japy
Flow: 3 m³/h
Head: 0 m - 6 m
Power: 0.25 kW
... Specifications and advantages: Electric vane pump Characteristics Fluid - Petrol, Diesel Technology - DC, Vane ATEX - Yes Pump marking - II 2G Ex d IIC T4 Pump ...
Pompes Japy
Pressure: 78 bar - 468 bar
... other application systems or ring lines Automotive industry Machine and vehicle construction Railcar construction Aircraft industry Marine and offshore industry Wind energy Wood ...
Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W
... Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and we will be glad ...
Flow: 40, 43 l/min
... safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards. Technical Specifications • - Cast iron pump body finished ...
Flow: 0 m³/h - 1,400 m³/h
Pressure: 25 bar
Head: 0 m - 250 m
... Product description
The NMB / Type NMR family comprises sealless
chemical
pumps built to ISO 2858 casing dimensions and equipped with a magnetic coupling. The split containment shell hermetically isolates the ...
Dickow Pumpen GmbH & Co. KG
Flow: 216 m³/h - 936 m³/h
Head: 8 m - 52 m
Power: 0 kW - 560 kW
... The ES Series ES lineup of sand gravel pumps boast a horizontal design and are single housing centrifugal pumps. Adding to this, the ES (G) range gravel and sand pumps are of superior tip ones, and are ...
Excellence Pump Industry Co.,Ltd.
Flow: 16.7 l/min
Pressure: 1,000 bar
Power: 31 kW
... to many different cleaning tasks, e.g. in the chemical industry, oil and gas industries, as well as for marine applications. Depending on the media being used, the standard carbide plunger in the 70Y ...
... A compact and self-draining diaphragm pump available in FDA approved 316L stainless steel, aluminium, Duplex 22, and Hastelloy®; used in an array of industries. - Compact hygienic design ...
Unibloc Hygienic Technologies
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
... The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical into a wide ...
Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar
... Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation ...
WANGEN PUMPS
Flow: 0.5 l/min
Pressure: 80,000 Pa - 120,000 Pa
Length: 410 mm
... The AGH1000B sampling pump is a hand-held gas sampling pump that is mainly used to assist the gas collection of portable gas detectors. With the intrinsically safe design, it can be used in explosive ...
Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW
... Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products such oil, glycol and water. ...
MOUVEX
Flow: 170 l/min
Pressure: 8 bar
Weight: 12 kg
... Diaphragm pump in aluminum with cataphoresis treatment series AAB-1 with membranes in EPDM, balls and seats in acetal ...
RAASM SpA
the best suppliers