IMO's remote Input and Output modules, commonly referred to as Remote-I/O, is a selection of serial, CAN and Ethernet 24VDC powered remote modules. Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) ...
IMO Precision Controls Limited
... C Programmable Remote I/O Module Cost-Effective programmable I/O module Support lwIP and BSD socket library and tiny web server Windows configuration utility included 1 x 10/100Mbps Ethernet interface 1 x Isolation RS-485 port, 1 Serial Console ...
The IA-3088 is a Multi way Relay Controller that includes 8 Power Relays with an output rating of 10Amp @ 230VAC, 8 Digital Inputs and a Serial Communication Port. The relays may be operated by the corresponding Digital Inputs, by a predefined internal ...
Intelligent-Appliance
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller can conveniently connect to Ethernet and 485 bus to realize accessing ...
Shanghai ZLAN Information Technology Co.,Ltd
... Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 - ...
... Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point or 30VDC 5A per ...
Beijing Tengcon Technology Co.,Ltd.
... -8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection -8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each -Relays Can be Configured for Level or Pulse Modes -Microcontroller with SRAM and ...
... 8 digital inputs / 8 digital outputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose. As a professional ...
BRAINCHILD ELECTRONIC CO., LTD
... Universal, programmable I/O device server Barionet 1100 is the newest fully programmable I/O device server of Barix, based on Linux/Lede/OpenWRT. The device features a wide range of interfaces such as two USB, WiFi, serial ports, analog and digital I/Os, ...
Barix
... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...
The IOM-CH16 Digital I/O Module can acquire the status of 16-channel digital inputs, or 8-channel digital inputs and 4-channel relay outputs, or 12-channel high-voltage digital inputs, or 8-channel relay outputs. It also supports remote data acquisition ...
... The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto ...
Opto 22
The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with ...
MBS GmbH
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar RS-485 Modbus RTU, ...
ADTEK Electronics Co., Ltd
FD-16M Modbus Modular I / O module has designed from a different perspective to automation systems. The FD-16M hardware modular design allows you to solve both your systems in a cost-effective way and to design them in such a way that there are no spare ...
MCM260Xs are data acquisition modules. The complete series includes six different combinations of free-programmable analog and digital I/Os. Originally conceived as data acquisition/actuation modules for Pixsys PLCs (programmable logic controllers) and ...
Pixsys
... The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...
To expand the I/O capability of certain RTCU products an MODBUS compatible I/O module can be connected to the product and configured using the I/O Expansion configuration functionality available in the RTCU IDE. The I/O Expansion is completely transparent ...
LOGICIO
... Basis-module for several fieldbus systems Connectable to RS232, RS485, Profibus DP via exchangeable plug-in card 8 inputs, 8 outputs Transistor or relay outputs ...
... I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 is an IO analog module ...
4neXt
... • Supports Class A and Class B connections • Supports Built-in Isolator • Ensures a reliable and logic data transmission via Ring and Bus topologies. • Uses RS485 serial communication and data transmission speed is • 230.400bps • Same level of accessibility ...
The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done with a flip of ...
AMiT, spol. s r.o.
... Power Supply - 24 VDC Permissible Range - 20.4 - 27.6 VDC Power Consumption - 3W Dijital Inputs Nominal Input Voltage - 24 VDC Input Voltage - For Logic 0 - For Logic 1 10 VDC Input Current - 6mA max. Input Impedance - 5.9 kohm Response ...
... Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● Support standard ...
Protech Systems
... • supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output relay ...
The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A @ 24 VDC ...
... The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and 4 digital inputs ...
Data-Control PC
The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ethernet and ...
Taiwan Pulse Motion
The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and conveniently available on the front panel. Using the 3-wire connection technology, all sensors can be connected directly ...
Sontheim Industrie Elektronik GmbH
The MxxxT Series Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet ...
King Pigeon Communication Co.,Limited
Our remote I/O expansion units communicate with Modbus TCP/RTU and IEC 61850 GOOSE, allowing to extend and distribute the acquisition and command capabilities of any master device. We offer flexible I/O board configurations to fulfill any application ...
... W-M2B601 | 2-Ch Voltage/Current Input & 4-Ch Digital Output Module 4-Ch Digital Output with High Voltage Range: 3.5~30V 2-Ch Voltage/Current Input with High Voltage Protection High Isolation: 2500V Communication Protocol: Modbus RTU Channel Independent ...
... PAMIO 2ENC4A ■ 4 analog inputs ■ 4 analog outputs ■ 2 RMS inputs ...
Power Automation
... Modbus TCP Ethernet Remote IO Module (2DI+2DO+2AI+RJ45+RS485) The M100T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance ...
King Pigeon Hi-Tech Co., Ltd.
The five communication ports in FBs-PLC can simultaneously connect to various intelligent peripherals with various interfaces such as USB, RS232, RS485, Ethernet, CANopen® and ZigBee™. Apart from the FATEK and Modbus protocol or communication through ...
... The I/O extension module is DIN rail mounted and provides 1 analog input, 1 analog output and 2 digital input/output. Key Features • Easy and tool-free I/O mapping via thumb wheel on the front • Modular design via DIN rail connector (hot-swap capable) • ...
The MR-AO4 module is developed to enhance the functions of connectivity, I/O and analysis of the device to which it’s connected. The MR-AO4 includes 4 opto-isolated multifunction analog outputs and each one can be used for generating voltage or current.
The MR-AO8 module is developed to enhance the functions of connectivity, I/O and analysis of the device to which it’s connected. The MR-AO8 includes 8 opto-isolated multifunction analog outputs and each one can be used for generating voltage or current.
The MR-DI16 module includes 16 isolated digital inputs. This module can also be connected to Contrel elettronica devices equipped with an RS485 communication interface where a greater number of inputs is required. It is possible to configure each input ...
... Automation of measurements using the 8500 Low Thermal Scanner allows a completely automated measurement system to be realised 10 channels referenced to a single output on the rear of the unit 4 terminal Kelvin switching (2 voltage, 2 current terminals) 200V ...
Intrinsically safe I/O module intended to control electrovalves. The electrovalves can be controlled in a twomode or smooth way (i.e. proportional control). I/O ports can be also applied as general-purpose binary interfaces. Communication with the module ...
FAMUR
... Thickness:20mm Description:Distributed I/O optical transmission - master module - Ethernet communication Application:Data transmission Series:88DMM2 Colour:black ...
the best suppliers