... The IpoD Coil is a power driving module for injectors using magneto-electric technology. It features different driving modes and its numerous advanced functions mean that it can adapt to most commercially available injectors. The driving modes ...
E.F.S. (Etude Fabrication Service)
... the HART protocol. Converters converts the measured value to a 4-20mA current signal according to the configured scale. Thermocouple and resistance thermometer type temperature sensors can be connected to the input of ...
Elimko Elektronik Imalat ve Kontrol
... The TPIs extra slim series is specially designed for the measurement of industrial signals (process, temperature, resistance, frequency…) which can either operate independently and autonomously or be interconnected in a local network. Easy ...
ARDETEM SFERE
... This device makes an analog signal conversion and it sends the same signal out on the two outputs. It also makes a galvanic isolation between the input, output1, output2 and power supply. The signal ...
Levtech Service Production SRL
The FOI-2971 and FOI-4972 provide complete electrical isolation for 2-wire telephone communications. The FOI-4972 supports standard analog phones, STU-III (secure telephone unit) phones, STE (secure telephone equipment) phones, fax machines, and modems ...
... counter, e.g. 1 pulse/ litre. The converter can also be used as a pulse counter that increases the output signal according to the scaling. The counter is reset via an external contact. The processor-based converter ...
Nokeval
... High Input Resolution A/D 18 Bits Various Communication Protocols (PC Link, MODBUS) Multi Input (T/C, RTD, DCV) Controling and monitoring Controller with PC Powerful Communication and 31 Sets Multi drop Function Free Operation Program ...
... Signal converter TTL and LVDS Small signal converters for TTL and LVDS displays facilitate the retrofitting and repair of older systems where displays and mainboards shall be replaced. # ...
... centralized measurement convert multi-channel standard DC transmission signal into digital signal output, can measure 8 channels of current and 4 channels of voltage input signals. Multi - channel DC ...
... The VFC 200 is a 2-wire vortex signal converter. It can be combined with the VFM 4000 flow sensor to form the OPTISWIRL 4200 vortex flowmeter. ...
... and easy transfer of data to a PC The UFC 300 P is a portable signal converter with LCD display. Combined with the OPTISONIC 6000 P ultrasonic flow sensor it forms the OPTISONIC 6300 P ultrasonic clamp-on flowmeter ...
Suitable for the connection of sensors and absolute encoders with SSI interface, Analog output 0/4 mA ... 20 mA, RS 232/RS 485-Interface for serial readout of sensor information, SSI:Master or slave operation , Specified option for arbitrary linearization ...
... Overview The DAC8562 is a 16-bit, dual-channel, low-power buffered voltage-output digital-to-analog converter with an internal 2.5-V reference (typical drift 4 ppm/°C). The internal reference supports a 2.5 V or 5 V full-scale ...
... From the standard position signal 0/4 – 20 mA, the I/P converter type 8045 from Schubert & Salzer generates a pneumatic output signal e.g. for the electrical control of pneumatic positioners.The converter ...
... The SI220 signal converter converts, multiplies and divides output signals into incremental pulse signals. It interpolates the output pulses per period of the input signal ...
... functionally compatible and more powerful successor to our proven signal converter IP251. The signals recorded via the SSI input are converted precisely and quickly by the IP210 converter ...
... The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A ...
... The IWA pulse rate converter generates for a total of 45 ranges between 0.06 pulses I min ... 540 k pulses I min at its output a signal analogue to the pulse rate. ...
... isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 ...
... There are 2 models available according to the serial signal to be converted: Dimensions: 27.80 x 77.31 mm, depth 87.50 mm OMEGA din rail mounting inside the cabinet Connection with 2.5 mm² terminals or with plug-in terminals ...
... master unit. The cable length must not exceed 1500 m at 9600 baud. According to the unit to be connected to the converter, the cable could be: CATTL D011 or CATTL I011 (see manual for details) ...
This Interface converts MOBALine into DCF 77 time code (current loop or open collector). Their small outlines make them easy to mount even in restricted areas.
... The A1000 and A2000 series converter boxes convert RS-232 communication signal levels to the correct electrical signals required by RS-485. The RS-485 communications standard is recommended when many ...
... The A1000 and A2000 series converter boxes convert RS-232 communication signal levels to the correct electrical signals required by RS-485. The RS-485 communications standard is recommended when many ...
... The A1000 and A2000 series converter boxes convert RS-232 communication signal levels to the correct electrical signals required by RS-485. The RS-485 communications standard is recommended when many ...
... UNIT and SUPPLY CONVERTER • Converter to adapt various standard signals • Supply voltage for two-wire transmitter • Plastic housing for mounting on 35 mm standard mounting rail according to EN50022 For ...
The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ...
... RS232/485/422 to fiber optic converter, designed to provide long-distance, high-speed serial communication in challenging industrial environments. With one serial port (RS232/RS485/RS422) and one fiber optic port, this converter ...
... The resolver-to-digital converter MSX-RDC-17 is a device for supplying and acquiring a resolver. It converts the position value given by the resolver into a digital incremental output signal. The resolution of the incremental ...
... DIFFERENTIAL SIGNALS CONVERSOR FOR ENCODERS • A/B Differential signals conversor • A/A and B/B differential Push-Pull Input • A/B Push-Pull Outpout • Low consumption 70mA (without load) • Power supply 10..24v • ...
... Level converter Signal splitter Technical details Version - For incremental encoders Product status - Active ...
Lika Smart encoders & actuators
... amplification or conversion of electrical signals. With different formats (installation on DIN rail, wall mounting or head installation) we generate a normalized output signal (in Vdc or mAdc) from primary signals ...
... multifunctional device useful for signal conversion ( converter), RS485 junction amplification (repeater) and bursting of RS485 star (spark gap) line. Several CRE14 can be stacked to increase the number of RS485 junctions. 3 ...
... Power Supply - 24VAC (20...28 V AC 50Hz / ), VA AO - 2 Specifications for Signal converter Ambient humidity (non-condensing) - 0…90 % RH Storage temperature - -40…50 °C Analogue inputs type (AI) - 6 inputs 0-10v Analogue ...
... transmitters for DIN/B head convert a signal acquired by temperature probes PT100, PT1000 or Ni100 (with 2-, 3- and 4-wire connections) or Thermocouples into a 4..20 mA signal (2-wire technology), current-loop. These ...
Pixsys
... MPCV015 signal converter (analog input converter) is a trasmitter with 1500V of triple galvanic isolation. This model is completely configurable by RS232 serial output. It's available a RS485 serial ...
... The 1 Analog signal input CAN controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required ...
... The PPC-4E is a photovoltaic power converter optimized for maximum efficiency in the range of 790 – 850 nm illumination. Source optical energy is delivered via multimode fiber, compatible with installed short haul communication systems. Reliable ...
... The OMX 200 model series are digital DIN rail mounted signal converters housed in an enclosure only 12.5 mm wide. The OMX 212PM type is a simple single-channel isolator/splitter with a convenient setting of the input ...
... Signal Converter AC supply 90-264VAC Selectable Input & Output The ISOCON Isolating Signal Converter can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage ...
IMO Precision Controls Limited
... you have any query, please contact us by Direct Industry or by email [email protected] Aecl AT-740 RV, RVZ - Reverse Converter [Features] ● Versatility of Input and Output Ranges. ● Plug-in Socket Structure and DIN Rail Mounting. ● ...
... "MAN") the analogue signal from the control system is isolated and the ANU/ANI inject a signal (terminalsY & ) which can be adjusted from 0 to IOV or 0-20mA by the The brightness of the LED "Y" is proportional to the ...
... USB 2.0 device designed for many applications including laboratory and semiconductor fab signal analysis. This product is a USB-based Analog to Digital (A/D) converter board that features two single-ended 16-bit analog ...
... The Pt100 signal converter Transcont WTAU-100-U0 is used to convert a Pt100 resistance signal galvanically isolated into a standarized signal and to adjust is in the zero value and/or ...
ACS Control-System GmbH
the best suppliers