Flow: 1,000 l/h - 15,000 l/h
Pressure: max 2.0 bar
Power: 2.2 kW
... 100% French-made, helical lobe
pumps with EPDM rotors (CE1935/2004) overmolded onto a 316L
stainless
steel core.
Designed in-house, our lobe
pumps truly stand out thanks to their ...
TECHNOPOMPE
Flow: 2,000 l/h - 30,000 l/h
Pressure: max 3.0 bar
Power: 4 kW
... oil-immersed housing and the
pump's hydraulic section are sealed and separated by a dry chamber.
Design:
- Pump body: precision wax-cast 316L stainless steel
- Helical trilobes: EPDM CE1935-2004/316L stainless steel
- Speed reducer
TECHNOPOMPE
Flow: 500 l/h - 15,000 l/h
Pressure: 2 bar
Power: 1.5 kW
... Precision wax-cast 316L stainless steel pump body
TECHNOPOMPE
Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel ...
Enfound enterprise co.,ltd
... problem with stainless steel or cast iron materials. 3. Discharge/suction flanges are using adhesive to connects to the pump. It will solve leakage or damage problems caused by connection to the thread ...
Enfound enterprise co.,ltd
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel ...
Enfound enterprise co.,ltd
Flow: 1 l/min - 2.5 l/min
Pressure: 0.5 bar - 5 bar
Power: 0.03 kW - 0.03 kW
... The MPD025 is a miniature external gear pump with a DC brushed motor. Typical materials include SS316L machined casing (304 or PPS options depending on model), PEEK gears, FKM (fluorine rubber) sealing ring and dynamic ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 1 l/min - 1.5 l/min
Pressure: 0.5 bar - 20 bar
Power: 0.07 kW
... 316L or ceramic shaft) and
pump body materials (304, 316L, PPS) allow fluid compatibility and customization.
Model Specification
Model: MPB 015 B A A A 24V 70W
Configuration digits: 1 2 3 4 5 6 7 8
1
Pump ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 15 l/min
Pressure: -0.85 bar - 10 bar
Power: 0.4 kW
... Model: MPB 150 B A D A 24V 400W
Position map (by column):
1:
Pump Series = MPB (Rubber O-Ring Seal)
2: Model/Displacement = 150 (5.4 ml/rev; maximum flow rate 10 LPM)
3:
Pump Body = A: 304; B: 316L; C: PPS; ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 50 l/min
Head: 0 m - 470 m
Power: 0.37 kW - 6.3 kW
... Available motor power: from 0.37 to 6.3 kW
STAC S.r.l.
Flow: 0 l/min - 600 l/min
Head: 2 m - 25 m
Power: 1.1 kW - 2.2 kW
... Construction and materials
- Casing, impeller and pump body in stainless steel AISI 4.5 alloy
- Motor shaft in stainless steel Inox AISI 420
- Screws
STAC S.r.l.
Flow: 0 l/min - 300 l/min
Head: 1.2 m - 19 m
Power: 0.37 kW - 1.1 kW
... material: Inox G AI 9
STAC S.r.l.
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... products from “skimmers” into the sea and lakes SP35 is a 3 hydraulic waste pump for clear and heavily loaded liquids, impeller and shell are made in stainless steel. The pump produce ...
Flow: 30 l/min - 3,000 l/min
Pressure: 17 bar - 210 bar
Length: 400 mm
... without damage indefinitely • The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber • Can be operated by small power pack or by the hydraulic circuit ...
Flow: 30 l/min - 3,000 l/min
Pressure: 17 bar - 210 bar
Head: 16 m
... without damage indefinitely • The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber • Can be operated by small power pack or by the hydraulic circuit mini ...
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. They feature a unique seal-less design with a double ...
MOUVEX
Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm
... lubricator and pressure regulator unit, lightweight fluid reservoir, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include stainless steel ...
Hi-Force Hydraulic Tools
Flow: 23.9 l/min - 35.4 l/min
Pressure: 5, 10 bar
Power: 0.2 kW - 1.6 kW
... (Viton available on request). Parts in contact with spray liquid: polypropylene and AISI 316-L stainless steel on P 36/10, polyamide and stainless steel on P 36/15. On request: regulation valve. ...
COMET Spa
Flow: 103 m³/h
Pressure: 34 bar
... dead zones in the pump. Plus the stainless steel gearcase, bearing retainers, splash plate and cleanout plugs deliver maximum performance. The ZP3 technology and features make it the best value in sanitary ...
Flow: 0.252 l/h - 25.2 l/h
Pressure: 2.8 bar
... Chemical resistant materials in the pump heads ( stainless steel with graphite gears) handle a wide range of materials. These hardy pump heads are compact and easy to ...
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... systems • Temperature-controlled pump heads (-20…+130°C) • Highly flexible due to various control concepts and housing types Specifications Pump type - compact high-pressure dosing pump Delivery ...
Flow: 60 l/min - 600 l/min
Pressure: 1 bar - 8 bar
Fluid temperature: 5 °C - 120 °C
... Pneumatic Double Diaphragm Pumps 1:1 Minimum pulsation Minimal changeover times in conjunction with the short-stroke principle of the pumps reduce pulsation to a minimum and ensure a more uniform media flow. Maximisation ...
Timmer GmbH
... Sample Pro Low Flow Pneumatic Groundwater Sampling Pump The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use design. It runs ...
QED Environmental
Flow: 0 m³/h - 550 m³/h
Pressure: 0 bar - 25 bar
... The centrifugal pumps FP provide ultimate solution for hygienic applications. The pumps are available at low rate, but quality is not a problem as it is a strong unit with low maintenance requirements. The FP pumps ...
FRISTAM
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Flow: 20 l/min
Pressure: 4 bar
Power: 125 W
... "Diaphragm pumps are membrane-type positive displacement pumps that use a membrane made of rubber or fluororesin. The compact, lightweight design makes them easy to install in other equipment and it is also highly airtighted. ...
Head: 8 m
Power: 3 kW
... The PR 250 pumps are made of AISI 304 stainless steel and are suitable for transferring grapes and marc. The product is introduced into the hopper auger inside the pump casing, where ...
Mori-Tem
Flow: 0 l/min - 0.025 l/min
Pressure: 0.7 bar - 1,390 bar
... independent constant flow or pressure Single pump flow - or pressure - ramp programming Single pump dispensing Dual pump continuous constant flow or pressure Dual pump concentration ...
Flow: 392 l/min
Pressure: 320 bar
Power: 155 kW
... descaling in the steel industry. In addition to the corrosion-resistant stainless steel version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the ...
WOMA GmbH
Flow: 11.5 l/min - 20 l/min
Pressure: 500 bar
Power: 15.3, 11, 19.1, 11.5 kW
... Reciprocating plunger pump, 3 solid ceramic plungers, block-style stainless steel head, aluminum die cast crankcase with cataphoresis coating, double sealing system, hardened ...
UDOR S.p.A.
Flow: 80 l/min
Pressure: 30 psi - 100 psi
Power: 20 W
... EP1310C 1/10 Gallon Single Cartridge Pump System is a powerful, medium-ratio system for controlled fluid transfer from 1/10th gallon (310 ml) plastic cartridges. Suitable for silicone-type fluids, this low-pulse pump ...
Fisnar Inc.
Flow: 171.7 m³/h
Pressure: 344.7 bar
Fluid temperature: -40 °C - 93 °C
... Williams Vmac™ Series model D is an Electric Driven, Chemical Injection, positive displacement plunger pump utilizing double spring loaded lip seals and an integral worm gear drive. It is available in 2 different standard gear ratios ...
Williams Milton Roy
Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar
... The WANGEN progressing cavity pump type KB-SL Hygienic is a further development of the pump construction series for the food industry. In this area, where there is contact with the product, the stainless ...
WANGEN PUMPS
Flow: 0 l/min
Pressure: 0 bar
Head: 0.5 m - 10 m
... Electromechanical assembly in AISI 304 chrome-nickel steel, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump with food-grade oil lubrication, and V-ring in direct ...
Zenit
... Drum pump, interior in stainless steel with outlet elbow parts in contact with medium made from stainless steel 1.4301 and PTFE electro-statically conductive immersion ...
the best suppliers